Aplicarea si instalarea placilor din fibre lemnoase GUTEX
Limba: Engleza
Produse încluse în această documentație: Multiplex-top, Multitherm, Thermoflex, Thermoroom, Thermowall, Ultratherm, Thermofibre
Tip documentatie: Instructiuni montaj, utilizare
Salvează pdf
Full screen
Wood Fibreboard
Product Applications
1
Contents
P. 6 Product Overview
P. 8 Above-Rafter Insulation
P. 9 Between-Rafter Insulation
P. 10 Rain-Tight Sarking
P. 11 Flat Roofs
P. 12 Vented Facades
P. 13 GUTEX Thermowall® ETICS
P. 14 Interior Insulation of Exterior Walls
P. 15 Installation Cavities and Lightweight Partition Walls
P. 16 Concrete Ceilings and Floors
P. 17 Floors Over Wood Joist Ceilings
P. 18 Technical Information
2
3
Experience...
For over 80 years, the Black Forest family-owned and -operated
company GUTEX Holzfaserplattenwerk GmbH + Co KG has
produced insulating board from wood at its plant in WaldshutTiengen, Germany. Now in its fourth generation, the company,
headquartered in Waldshut-Tiengen Germany, employs 130
people and manufactures 12 million square metres of wood
fibreboard insulation annually.
Innovation...
Besides experience, the key reason for GUTEX's market leaderÂ
ship is its commitment to providing superior quality, service,
and
stock availability, which has led to a great deal of product and
manufacturing innovation. In 2006, GUTEX introduced the
world's first dry wood fibreboard manufacturing plant.
Diversity...
GUTEX insulation products are the ideal ecological choice
for a host of applications, including external thermal insulation
composite systems, wall insulation for vented facades, insulation
above rafters and/or between frame members with sheathing,
insulation of ceilings, interior insulation of exterior walls,
insulation of service cavities, acoustic underlay in various floor
assemblies and under many floor coverings.
Performance...
Whether old or new building, GUTEX insulation products are up
to the task, delivering more than structural and environmental
requirements demand. Some of their most distinct qualities are:
- Low thermal conductivity, which guarantees excellent
protection in winter against cold
- Highest possible volumetric heat capacity for the best
protection against heat in
summer
- Superior airborne and impact sound insulation thanks to
open-pore fibrous construction and higher bulk density
- GUTEX wood fibre products are completely recyclable and,
provided wood preservatives have not contaminated them,
can be disposed of at the nearest recovery centre.
- Unsurpassed environmental compatibility and biological
safeness. The raw material for all GUTEX insulation products
comes from wood that is locally harvested and grown using
sustainable forestry management practices. GUTEX insulation
products are natureplus©-certified.
Certified Quality...
All GUTEX products undergo stringent quality control tests
by GUTEX and are subject to approval by an independent,
authorised test and certification agency (FMPA, Stuttgart).
GUTEX’s external thermal insulation composite system has the
approval of the German building materials and physics-testing
agency. And GUTEX’s quality and environmental protection
management system, certified according to D
IN EN ISO 9001,
ISO 14001 and EMAS II (EU Eco Audit Ordinance), guarantees
the environmental compatibility and consistent high quality of
GUTEX products.
4
2
3
1
4
5
7
6
8
9
11
10
12
5
GUTEX Multiplex-top
A rain-tight sarking board with singleply construction and homogenous
cross-section.
GUTEX Ultratherm
A strong rain-tight sarking board with
a single-ply construction and a homogenous cross-section, this product's
high U-value makes it very suitable for
new roofs and roof refurbishment.
GUTEX Multitherm
A moisture resistant insulation wood
fibreboard with single-ply construction
and homogeneous cross-section that
is an ideal sarking board for exterior
walls under facade facing or the
undersides of rafters.
GUTEX Thermosafe-homogen
A universal insulating board with
single-ply construction and homoÂ
genous cross-section, it provides
superb protection against the influx of
heat in summer and loss of heat in winter.
GUTEX Thermoflex
A flexible wood fibreboard that is
d
esigned for use between rafters and
in timber-framed walls.
GUTEX Thermoflat
This single-ply insulating board
features a homogeneous wood fibre
cross-section and a compressionproof construction, which make it
ideal for flat wood, concrete and sheet
metal roofs.
NEW!
GUTEX Thermosafe
Universal insulating board with multiply construction that provides superb
protection against the influx of heat in
summer and loss of heat in winter.
6
GUTEX Thermofibre
A loose-fill wood fibre insulation
for blow-in installation in vertical or
horizontal cavities and horizontal
unenclosed spaces.
Properly applied and
installed, GUTEX products
exceed all your expectations
GUTEX's range of wood fibreboard insulation products is as
diversified as are the specific insulation requirements of the
different areas of buildings. Whether you're looking for a
solution for a new or an existing building, you're sure to find the
suitable product for your roof, wall, floor or ceiling in GUTEX's
product portfolio.
If used properly, the products perform
beyond all expectations. GUTEX provides a wealth of
information at www.gutex.de and in its brochures, offering
guidelines for using its insulation products, so that you can enjoy
all the benefits they offer.
GUTEX Thermoinstal
A compression resistant insulation
board with single-ply construction
and
homogenous
cross-section,
this product is your choice for the
thermal insulation of installation cavities,
electrical and plumbing lines.
GUTEX Thermoroom
An insulation board with single-ply
construction and homogenous crosssection that is ideal for the retrofit
insulating of interior walls.
GUTEX Thermosafe-wd
An insulating board with singleply construction and homogenous
cross-section, this product features
exceptionally
high
compression
resistance, making it ideal for any wall
or floor structure.
GUTEX Thermofloor
A very versatile impact insulation board
for all floor applications, including wet
and dry screed.
GUTEX Happy Step
The ideal under
lay for high-quality,
interior floor coverings.
GUTEX Thermowall/-gf
A single-ply plaster baseboard with
homogenous
cross-section,
this
product is the perfect choice for use
with GUTEX’s ecological composite
thermal insulation system.
GUTEX Thermosafe-nf
A superior impact insulation board
with tongue and groove joints, this
product comes with spruce joint
strips for easy installation of long and
short plank flooring, which screws to
the strips.
7
Roofs
Above-Rafter Insulation
GUTEX Multiplex-top®, GUTEX Ultratherm®,
GUTEX Thermosafe-homogen®, GUTEX Thermosafe®
When most people think of insulation, they think of insulation
against the cold. However, if the area of a building involved is
the roof, insulation against heat in summer is also extremely
important.To avoid unpleasant heat in areas directly under roofs,
insulation materials with higher volumetric heat storage capacity
and lower thermal conductivity are required. GUTEX insulation
boards are specifically engineered to
provide the optimum
combination of these two properties. Another decisive
characteristic for roof insulation is soundproofing. GUTEX
insulation's open-pore construction and high bulk density pro ide
v
excellent acoustic insulation. In addition, the products feature
superb vapour permeability (µ=3) and moisture regulation. In
fact, the boards are capable of absorbing and later releasing up
to 20 % of their weight in moisture without sacrificing insulation
performance. All these attributes ensure you will have the
pleasant and healthy indoor environment you envision.
Fastening with special screws
A vapour retarding membrane is laid over the exposed sheathing.
The membrane is then covered with GUTEX Thermosafe-homogen®,
which is subsequently covered with GUTEX Multiplex-top®, a raintight sarking board.
8
GUTEX above-rafter insulation assembly with GUTEX Thermosafehomogen® and GUTEX Multiplex-top®
Between-Rafter Insulation
GUTEX Multiplex-top®, GUTEX Ultratherm®,
GUTEX Ther
mosafe-homogen®, GUTEX Multitherm®,
GUTEX Thermofibre®, GUTEX Thermoflex®
Tightness and installation ease are essential to achieving effective
between-rafter insulation. GUTEX Thermofibre®, a highly flexible
and form-adaptable wood fibre blow-in insulation is especially
suited for use in between-rafter applications. Another excellent
alternative is GUTEX Thermoflex®, which has the flexibility and
resilience needed to bend, return to original form, join, and fit
tightly between rafters.
The combined features of insulation against heat and cold,
soundproofing, fire protection, vapour permeability and humidity
control offered by these products - like all GUTEX insulation
products - provide a much higher level of living comfort.
Interior view
Concrete or
clay roof tiles
Battens
Exterior view
Old buildings
New buildings
GUTEX Multiplex-top®/
GUTEX Ultratherm® over
the rafters
GUTEX Multiplex-top®
between the rafters
GUTEX Thermofibre®/
GUTEX Thermoflex®
GUTEX Thermofibre®
/
GUTEX Thermoflex®
Vapour retarder/ Air barrier
GUTEX Multitherm,®
with tongue and groove
Battens
Vapour retarder/
Air barrier
Interior substrate
(wallboard, etc.)
9
Battens and interior wall
substrate (wallboard, etc.)
Roofs
Rain-Tight Sarking
GUTEX Multiplex-top®, GUTEX Ultratherm®
GUTEX Multiplex-top® (22 to 35 mm thick) and GUTEX
Ultra herm® (50 to 160 mm thick), single-ply sarking boards,
t
install over above-rafter insulation, adding insulation while
making the roof structure rain-tight. Their homogeneous
structure offers many outstanding insulation qualities, which
owe their uniqueness to the ultra-modern dry manufacturing
technique used to produce the boards. Amongst these properties are a low U-value (λ = 0.044, respectively 0047 W/mK)
with increased stiffness and compressive strength (up to 200
kPa). The sarking boards' singular tongue and groove joints as
well as their high dimensional consistency are distinct GUTEX
quality attributes, which translate into
significant timesavings and
reliable rain-tightness, benefiting both homeowners and
tradesmen. Alone the fact that the boards easily join without
requiring a hammer and woodblock, saves, according to qualified
estimates, up to 15 % on installation time. And the joints are
so tight that joint tape is unnecessary. The roof is reliably raintight for up to 12 weeks, which means you have three months
to turn your attention to work inside the house during winter,
etc. before installing the roofing material.
Installs directly over the rafters
GUTEX Multiplex-top®
Tongue and groove
along the width
10
Joint-free at the ridge
Suitable as temporary roof covering (max. 3 months)
GUTEX Multiplex-top®
Tongue and groove
along the length
Flat Roofs
GUTEX Thermoflat®
GUTEX Thermoflat® is ideal for use on all flat roofs and is
virtually unlimited in its range of application. Roofing material
installs directly over it and may be left exposed or covered with
gravel. It is also durable and str
ong enough to support the roof's
use as a roof terrace. GUTEX Thermoflat® is equally suitable
for new or old wood, metal or masonry substrates and offers
buildings all the advantages of GUTEX insulation boards. And
GUTEX Thermoflat® may be ordered factory-tapered to
facilitate proper water run-off.
GUTEX Thermoflat® over a wood substrate
GUTEX Thermoflat® installs easily
GUTEX Thermoflat® over a concrete substrate
11
Walls
Vented Facades
GUTEX Multitherm®, GUTEX Thermosafe-homogen®, Â
GUTEX Thermosafe®, GUTEX Thermofibre®,
GUTEX Thermoflex®
Still another variation of exterior wall is the vented facade. Here
as well, GUTEX wood fibreboards offer may key advantages,
whether for solid masonry and wood substrate or for timber
frame construction.
Vented facade assembly over framed
construction with GUTEX Thermofibre ®,
GUTEX Thermoflex ® and GUTEX
M
 ultitherm ® behind a wooden facade
Vented construction over masonryÂ
with GUTEX Multitherm ® behind
Â
a wooden fac
ade
12
GUTEX Thermowall® ETICS
GUTEX Thermowall ®, GUTEX Thermowall-gf ®
The GUTEX Thermowall® external thermal insulation composite
system uses GUTEX Thermowall® boards. Precisely engineered
and code-compliant, the system is suitable for non-vented
wood or masonry applications and provides a very noticeable
improve ent in indoor environments. Thanks to their single-ply
m
construction, homogenous cross-section and consistently
precise dimensions, the plaster baseboards are remarkably
easy to install. The GUTEX Thermowall© composite system is
extremely impact resistant and satisfies the highest sound and
thermal insulation performance requirements.
Installing GUTEX Thermowall ®
plaster baseboard over masonry
Installing GUTEX Thermowall ®
plaster baseboard with tongue and
groove joints over timber frames
For installation details, refer to the
GUTEX Thermowall® ETICS brochure.
13
Walls
Interior Insulation
of Exterior Walls
GUTEX Thermoroom®
For several reasons, ext
erior walls often can be retrofit with
insulation only on their interior sides. GUTEX Thermoroom®,
an insulation board made from wood fibre with a single-ply,
homogeneous construction, was designed specifically with this
in mind. Thanks to its construction, the board installs without
mechanical fixation. All that’s needed to fasten the insulation
board to the existing substrate is a suitable adhesive. Excellent
insulation against the cold, outstanding protection against the
heat and astoundlingly effective acoustic insulation are amongst
the many features offered by this ecological wood fibre insulation
board, which are a guarantee for a healthy and pleasant indoor
environment.
Discerning homeowners and builders request biologically
harmless, healthy building products that provide lasting, effective
thermal insulation of outer walls. GUTEX Thermoroom® bears
the natureplus® seal of quality, an international designation that
certifies the sustainability of building products and furn
ishings.
A
B
A Apply GUTEX Klebe- und Spachtelputz
(adhesive/ base coat)
B Press GUTEX Thermoroom® firmly against
the substrate
C Apply the plaster over the board
C
14
1
Installation Cavities and
Lightweight Partition Walls
GUTEX Thermosafe-homogen®, GUTEX Thermofibre®,
GUTEX Thermoflex®, GUTEX Thermoinstal®
Timber-framed houses often have a second plane on the inside
of exterior walls where the power, heating and plumbing lines
run and are installed. GUTEX Thermoinstal® installs with full
surface contact to the sheathing. The worker cuts the channels
in the board prior to covering it with wallboard. GUTEX
Thermofibre® is also ideal for the insulation of these areas. It
blows into the wall cavities effectively filling them around the
service lines and hardware with significantly reduced manual
effort. Insulating of these areas provides the entire building
element with effective thermal and acoustic insulation.
Besides their obvious function of physically dividing o
pen areas
into rooms, lightweight partition walls are expected to dampen
sound and provide fire protection. Thanks to their open-pore
structure and high bulk density, wood fibreboard absorbs both
structure-born noise and indirect reflected sound. GUTEX
fibreboards are F30 to F90 fire-rated for use with both metal
and wood post wall constructions.
Lightweight partition walls
Service cavities
A
C
Lightweight timber-framed
partition wall
with GUTEX Thermofibre®/
GUTEX Thermoflex®/
GUTEX Thermosafe-homogen®
Lightweight partition walls
with metal studs and
GUTEX Thermofibre®/
GUTEX Thermoflex®/
GUTEX Thermosafe-homogen®
B
A Fastening GUTEX Thermoinstal®
B Cutting the channels for the service lines
C Fastening the gypsum board
15
Floors & Ceilings
Concrete Ceilings,
Concrete Floors
GUTEX Thermosafe-wd®, GUTEX Thermofloor®,
GUTEX Thermosafe-nf®, GUTEX Happy Step®
GUTEX floorboards provide suitable insulation for both floors
over concrete and floors over timber joist c
eilings. To soundproof concrete substrates effectively, it is necessary to decouple
the concrete ceiling from the walked-on floor covering. GUTEX
wood fibreboard excels at this task. And the diverse selection of
insulation boards permits a myriad of constructional variations.
Highly resistant to compressive forces, insulation fibreboard
performs ideally under, wet screed, mastic asphalt, particle or
chipboard, OSB substrate floorboards, dry screed, engineered
wood flooring, laminate flooring and solid wood planking.
GUTEX Happy Step® in a floating, staggered joint pattern.
Suitable floor coverings include laminates, finished parquet or carpet.
Under solid wood planking, GUTEX Thermosafe-nf ® with
joint strips installed over GUTEX Thermosafe-wd ®.
16
GUTEX Happy Step® installed over cement screed.
Both GUTEX Thermofloor® and GUTEX Thermosafe-wd® are
ideal for use between cement screed and concrete floors.
Timber Joist Ceilings
GUTEX Thermosafe-wd ®, GUTEX Thermofloor ®,
GU
TEX Thermosafe-nf ®, GUTEX Happy Step ®
Like with over-concrete use, GUTEX insulation floorboards
are suitable for a host of different wood assemblies. GUTEX
Thermosafe-wd®, an extremely compression-resistant product,
is ideal where very thick insulation is required under dry or
wet screed. If increased acoustic insulation is the primary
need, either GUTEX Thermofloor® or GUTEX Thermosafe-nf®
floorboard is the best choice. And when engineered wood
flooring or laminate flooring is concerned, GUTEX Happy Step®
delivers the extra impact insulation that is typically required of
sub flooring boards for such assemblies.
With the availability of so many different products, it’s easy to
understand why GUTEX is the first stop when it comes to
finding the most suitable, easy to install product for the specific
sound or thermal insulation application.
Once the surface is dust-free
and clean, lay the trickle
protection paper/moisture
barrier. Install an insulating
strip around the perime
ter of
the floor. Then install GUTEX
Thermosafe-wd ® as impact
sound insulation and cover it
with the GUTEX Thermosafe-nf ®
system before laying the solid
wood plank flooring.
GUTEX Thermosafe-wd® installed in a floor
over ceiling with exposed wood joists
GUTEX Thermosafe-nf with joint strips
installed over solid wood planking
17
Facts and Figures
Multiplex-top
Ultratherm
tongue and groove
tongue and groove
DIN EN 13171 2)
DIN EN 13171 2)
Length (mm)
2500
1780
1200
Width (mm)
750
600
625
Joint Type
18
Nominal thickness (mm)
Actual coverage, length x width (mm)
22
2476 x 726
28
2480 x 728
35
50
60
80
2480 x 722
100
butt
DIN EN 13171 3)
120
140
160
40
60
80
100
120 140
1760 x 568
1.875
Square metres per sheet (m2)
Thermosafe
0.75
1.07
Weight per sheet (kg)
6.75
8.25
10.5
13.12
9.6
11.5
15.4
19.2
23.1
26.9
30.8
3.3
4.95
6.6
8.25
9.9
Weight per m2 (kg)
3.6
4.4
5.6
7.0
9.0
10.8
14.4
18
21.6
25.2
28.8
4.4
6.6
8
.8
11
13.2 15.4
40
34
26
20
18
14
12
Boards per pallet
Square metres per pallet (m2)
Weight per pallet (kg)
11.55
55
45
35
28
112
70
56
42
36
32
103.13
84.38
65.63
52.50
42.72 36.31 27.77 21.36 19.22 14.95 12.82
84
52.5
42
31.5
27
24
530
530
430
400
400
450
390
200
Thermal conductivity λ (W/mK) **
110
0.042
0.037
0.047
Nominal thermal conductivity
λD(W/mK)
180
0.044
Density (kg/m3)
0.045
0.040
Nominal thermal
resistance RD (m2K/W)
0.41
0.50
0.64
0.80
1.19
1.43
1.90
2.38
2.86
3.33
3.81
1.08 1.62 2.16 2.70 3.24 3.78
Thermal resistance
R (m2K/W)
0.38
0.47
0.60
0.74
1.11
1.33
1.78
2.22
2.67
3.11
3.56
1.00 1.50 2.00 2.50 3.00 3.50
0.054
0.066
0.084
0.105
0.15
0.18
0.24
0.30
0.36
0.42
0.48
0.12 0.18 0.24 0.30 0.36 0.42
3
Vapour diffusion factor (μ)
sd-value (m)
3
Compressive stress/
strength (kPa)
200
150
40
Tensile strength perpendicular to
board surface (kPa)
40
30
10
Short-term water ab
sorption (kg/m²)
≤1
≤1
≤2
Dynamic stiffness (MN/m3)
Compressibility (mm)
Air flow resistivity (kPa·s/m3)
100
100
100
Specific heat capacity (J/kgK)
2100
2100
2100
E
E
Fire reaction Euro Class as per
DIN EN 13501-1
Thermal resistance is derived from λ90/90
and the board thickness.
GUTEX Multiplex-top® and GUTEX Ultratherm®:
Guaranteed by Germany's Association of Roofers.
GUTEX will be glad to send you test reports.
18
* Further dimensional information available on request
** Approval No. Z-23.15-1404
E
1)
2)
3)
4)
5)
DE-143-00002
DIN EN ISO 14001:2005
Verified Environmental
Management
Cert. No. 220108GUTEX00
-homogen
Thermosafe
Thermofibre
butt
rebate
0104-0307-012-1
0104-0604-012-2
0104-0604-012-3
0104-0710-012-4
0201-0710-012-1
unenclosed
Thermoflex
butt
enclosed (cavities)
DIN EN 13171 4)
bale length 800
1220
625
180
DIN EN 13171 1)
1200
160
DIN EN 13171 4)
bale length 400
575
200
220
240
20
40
60
80
100
bale length 330
15
kg (per bale)
40
60
80
100
120
140
160
180
200
220
240
1185 x 610
0.75
0.70
13.2
14.85
16.5
18.15
19.8
2.4
4.8
7.2
9.6
12
17.6
19.8
22
24.2
26.4
3.2
6.4
9.6
12.8
16
28
24
22
20
18
220
100
66
50
40
21
18
16.5
15
13.5
165
75
49.5
37.5
30
1.80 2.70 3.60 4.50 5.40 6.30 7.20 8.10 9.00 9.90 10.8
21 bales (packages) per pallet
112
70
56
42
36
32
28
24
20
22
20
78.57 49.11 39.28 29.46 25.25 22.45 19.64 16.84 14.03 15.43 14.03
490
200
330
160
1.26 1.89 2.53 3.16 3.79 4.42 5.05 5.68 6.31 6.94 7.58
25-30
28-45
45
0.037
0.038
0.038
0.040
0.040
0.039
4.32
4.86
5.41
5.95
6.49
0.54
1.08
1.62
2.16
2.70
1.05 1.58 2.11 2.63 3.16 3.68 4.21 4.74 5.26 5.79 6.32
4.00
4.50
5.00
5.50
6.00
0.50
1.00
1.50
2.00
2.50
1.03 1.54 2.05 2.56 3.08 3.59 4.10 4.62 5.13 5.64 6.15
0.48
0.54
0.60
0.66
0.72
0.10
0.20
0.30
0.40
0.50
5
1/2
1/2
0.08 0.12 0.16 0.20 0.24 0.28 0.32 0.36 0.40 0.44 0.48
20
10
100
â‰
¥5
5
2100
2100
2100
E
E
E
19
Facts and Figures
Thermoflat
Joint Type
Multitherm
Thermoinstal
Thermoroom
rebate
tongue and groove
butt
DIN EN 13171 2)
DIN EN 13171 2)
DIN EN 131713)
Length (mm)
1230
1270
1250
1200
Width (mm)
600
600
600
500
Nominal thickness (mm)
100
120
140
160
20
40
60
80
100
140
160
50
20
40
0.75
0.76
0.738
Square metres per sheet (m2)
120
60
1250 x 580
1215 x 585
Actual coverage, length x width (mm)
butt
DIN EN 13171 3)
0.6
Weight per sheet (kg)
10.3 12.4 14.5
16.5
2.1
4.3
6.4
8.5
10.7
12.8
14.9
17.1
5.6
1.6
3.1
4.7
Weight per m2 (kg)
14
16.8 19.6
22.4
2.8
5.6
8.4
11.2
14
16.8
19.6
22.4
7.5
2.6
5.2
7.8
44
36
28
Boards per pallet
Square metres per pallet (m2)
32
32.47 26.57 23.62 20.66
220
108
72
54
44
36
32
28
84
96
48
167.64
82.30
54.86
41.15
33.53
27.43
24.38
21.34
63
57.60
28.80
30
18.00
Weight per pallet (kg)
490
510
500
190
Density (kg/m3)
140
140
150
130
0.039
0.039
0.039
0.038
0.042
0.042
0.042
0.040
Nominal thermal conductivity
λD(W/mK)
Thermal conductivity λ (W/mK) **
Nominal thermal
resistance RD (m2K/W)
2.56 3.08 3.59
4.10
0.51
1.03
1.54
2.05
2.56
3.08
3.59
4.10
1.28
0.53
1.05
1.58
Thermal resistance
R (m2K/W)
2.38 2.86 3.33
3.81
0.48
0.95
1.43
1.90
2.38
2.86
3.33
3.81
1.19
0.50
1.00
1.50
0.48
0.06
0.12
0.18
0.24
0.30
0.36
0.42
0.48
0.15
3
Vapour diffusion factor (μ)
sd-value (m)
0.30 0.36 0.42
3
3
3
0.06
0.12
0.18
Compressive stress/
strength (kPa)
70
70
100
50
Tensile strength perpendicular to
board surface (kPa)
7.5
10
10
10
Short-term water absorption (kg/m²)
≤1
≤2
Dynamic stiffness (MN/m3)
Compressibility (mm)
Air flow resistivity (kPa·s/m3)
100
100
100
100
Specific heat capacity (J/kgK)
2100
2100
2100
2100
E
E
E
Fire reaction Euro Class as per
DIN EN 13501-1
Thermal resistance is derived from λ90/90
and the board
140
140
150
130
0.039
0.039
0.039
0.038
0.042
0.042
0.042
0.040
Nominal thermal conductivity
λD(W/mK)
Thermal conductivity λ (W/mK) **
Nominal thermal
resistance RD (m2K/W)
2.56 3.08 3.59
4.10
0.51
1.03
1.54
2.05
2.56
3.08
3.59
4.10
1.28
0.53
1.05
1.58
Thermal resistance
R (m2K/W)
2.38 2.86 3.33
3.81
0.48
0.95
1.43
1.90
2.38
2.86
3.33
3.81
1.19
0.50
1.00
1.50
0.48
0.06
0.12
0.18
0.24
0.30
0.36
0.42
0.48
0.15
3
Vapour diffusion factor (μ)
sd-value (m)
0.30 0.36 0.42
3
3
3
0.06
0.12
0.18
Compressive stress/
strength (kPa)
70
70
100
50
Tensile strength perpendicular to
board surface (kPa)
7.5
10
10
10
Short-term water absorption (kg/m²)
≤1
≤2
Dynamic stiffness (MN/m3)
Compressibility (mm)
Air flow resistivity (kPa·s/m3)
100
100
100
100
Specific heat capacity (J/kgK)
2100
2100
2100
2100
E
E
E
Fire reaction Euro Class as per
DIN EN 13501-1
Thermal resistance is derived from λ90/90
and the board
... ascunde
Alte documentatii ale aceleasi game Vezi toate
Fisa tehnica
2 p | RO
Multitherm
Fisa tehnica
3 p | RO
Thermoflex