Decofrol pe baza de ulei vegetal pentru imbunatatirea aspectului betonului aparent MAPEI MAPEFORM ECO 61

Limba: Engleza

49 afisari

Tip documentatie: Fisa tehnica

Pagina 1 - Decofrol pe baza de ulei vegetal pentru imbunatatirea aspectului betonului aparent MAPEI ...

m r 1 o f 6 e o p c a M E Form release-agent based on vegetable oils in water emulsion with chemical action WHERE TO USE Anti-adhesive treatment of iron, aluminum and plastic forms (epoxy, phenolic, polyester and polyurethane resins). It is particularly suitable for horizontal applications. Some application examples • To facilitate form release of precast concrete. Its high fluidity makes it particularly suitable for horizontal applications. • To facilitate form release of steam-cured concrete. • To form release concrete cast in plastic forms. • To form release concrete cast in metal forms. TECHNICAL CHARACTERISTICS Mapeform Eco 61 consists of a stable emulsion of vegetable oils, corrosion inhibitors and special admixtures developed in the MAPEI Research Laboratories. The efficiency of Mapeform Eco 61 is given by its action of chemical concrete stripping from formwork. Mapeform Eco 61 features the following advantages: • improved surface quality thanks to the drastic re

Pagina 1-Decofrol pe baza de ulei vegetal pentru imbunatatirea aspectului betonului aparent MAPEI MAPEFORM...

Pagina 2 - Decofrol pe baza de ulei vegetal pentru imbunatatirea aspectului betonului aparent MAPEI ...

duction of large and micro surface air bubbles; • no surface dusting; • no grease stains, even with white cements; • less cleaning of forms; • simple low-cost application; • easily and rapidly biodegradable; non toxic, does not irritate and does not cause sensitization; •n ot subject to the Italian law for the use of form release-agents based on mineral oils. RECOMMENDATIONS • Do not dilute Mapeform Eco 61 with water. •D o not dilute Mapeform Eco 61 with solvents or other oils. •P referably use Form Release Agent DMA 1000 with raw wood forms. •D o not use Mapeform Eco 61 with concrete, gypsum and polystyrene forms. •W hen using with rubber forms make sample tests or contact the MAPEI Technical Services Department. HOW TO USE Mapeform Eco 61 is ready-to-use. Application Apply Mapeform Eco 61 on the clean, dry formwork, preferably in a single coat, using pumps or atomisers at a pressure of 6 bar. To get the best finish, we recommend wiping over the formw