Documentatie atasata la

MAPEI

Materiale montaj, finisare si intretinere parchet 2011 MAPEI

Limba: Engleza

161 afisari

Tip documentatie: Catalog, brosura

Pagina 1 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

Parquet Line Over the last few years, there has been an increase in demand for wooden flooring in both the commercial and residential building sectors, for products of superior quality and which are aesthetically innovative. This demand has revolutionised the techniques and laying systems which, as far as MAPEI is concerned, has led to the development of a specific range of new products, made up not only of adhesives, but also by a complete range of products which includes binders, admixes and pre-blended mortars for mixing screeds, primers consolidators and waterproofing products for the preparation of highstrength substrates and smoothing and levelling compounds. The MAPEI systems used for laying wood are solvent-free and have an extremely low content of volatile organic compounds (VOC). Safe for those who use them, and for those who live them. Alongside the adhesive range, MAPEI also offers an extremely wide range of admixtures, pre-blended binders and mortars for screeds, primers

Pagina 1-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza Parquet Line
...

Pagina 2 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ,...

, insulating materials, consolidators and anti-humidity barriers, as well as smoothing compounds and auxiliary products for the installation of long-lasting floors and resilient materials. Our commitment to the environment MAPEI has always been committed to research and development into products which safeguard the environment, the health of those who use them and of those who use the areas where they are applied, and since 1980, they have developed a series of products which emit ad extremely low level of volatile organic compounds. Since October 2005, these products have been certified and labelled EC1 (very low emission level of volatile organic compounds) and since June 2010, EMICODE EC1PLUS (very low emission level of volatile organic compounds-PLUS), both issued by the German Institute GEV (Gemeinschaft Emissionskontrollierte Verlegewerkstoffe, Klebstoffe und Bauprodukte e.V.), association for the control of emissions in flooring installation; MAPEI is also a member. Maximum emis

Pagina 2-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza , insulating...

Pagina 3 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

sion limits for EC1 and EC1PLUS products: Adhesives EMICODE EC1PLUS Emission 3 days after laying Emission 28 days after laying TVOC ≤ 750 µg/m³ TVOC ≤ 60 µg/m³ TSVOC ≤ 40 µg/m³ Adhesives EMICODE EC1 TVOC ≤ 1000 µg/m³ TVOC ≤ 100 µg/m³ TSVOC ≤ 50 µg/m³ EMICODE® GEV The Green Innovation symbol identifies products with certain characteristics which contribute to achieving eco-sustainable buildings: – products with an extremely low emission level of volatile organic compounds – products with an extremely low emission level of dust during the mixing and storage phases – products which avoid the formation of mould when applied in damp environments – products which help to improve environmental wellbeing, for example by improving soundproofing against the noise created by foot-traffic – products based on the use of raw materials from recycled materials, to reduce impact on the environment deriving from the extraction of virgin materials Further information

Pagina 3-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza sion limits...

Pagina 4 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ...

regarding Mapei products please consult our technical data sheets or visit our website www.mapei.com Binders for screeds, smoothing compounds and additives Primers, consolidating compounds, moisture barriers, sealants and cleaning materials Adhesives for wooden and laminate flooring ▼ ▼ SOUNDPROOFING SYSTEMS FOR FLOORING Mapesilent Panel Mapesilent Roll Mapesilent Band Mapesilent Band R Mapesilent Door Mapesilent Tape Mapesonic CR SELECTION TABLE OF MAPEI PRODUCTS FOR THE PREPARATION OF SCREEDS WITH SPECIAL BINDERS AND PRE-BLENDED MORTARS 5 5 5 6 6 6 6 SELECTION TABLE OF MAPEI PRODUCTS FOR THE PREPARATION OF SUBSTRATES ADHESION PROMOTERS Primer G Eco Prim T Eco Prim Grip Mapeprim SP Primer KL Primer M Primer 3296 Livigum Primer PA 22 ▼ SELECTION TABLE OF MAPEI ADHESIVES FOR THE INSTALLATION OF WOODEN FLOORS 38 ▼ 9 25 25 25 26 26 26 27 27 27 ▼ ▼ ▼ WATER VINYL ADHESIVES Adesilex LC/R 41 Adesilex LC/RP 41 Adesivil D3 41 ADHESIVES BASED ON RESINS IN ALCOH

Pagina 4-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza regarding...

Pagina 5 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza OL ...

OL Adesilex PA 43 ▼ ADDITIVES, BINDERS AND PRE-BLENDED MORTARS FOR SCREEDS Mapefluid N200 11 Mapefluid PZ500 11 Mapecem 11 Mapecem Pronto 12 Topcem 12 Topcem Pronto 12 Planicrete 13 SELECTION TABLE OF MAPEI PRODUCTS FOR SMOOTHING COMPOUNDS ▼ PRIMERS, CONSOLIDATING COMPOUNDS AND/OR MOISTURE BARRIERS Prosfas 29 Primer PU60 29 Diluente PU 29 Eco Prim PU 1K 30 Eco Prim PU 1K Turbo 30 Primer EP 30 Quartz 1.2 31 Primer MF 31 Primer MF EC Plus 31 Triblock P 32 SEALANTS Eporip Eporip Turbo CLEANING MATERIALS Pulicol 2000 Cleaner L Cleaner H ▼ ▼ TWO-COMPONENT EPOXY-POLYURETHANE ADHESIVES Lignobond 45 45 Ultrabond P902 2K 45 Ultrabond P913 2K ONE-COMPONENT POLYURETHANE ADHESIVES Ultrabond P990 1K Ultrabond P997 1K T Ultrabond Eco P992 1K Ultrabond Eco P909 2K Ultrabond P-R9 SILILATED-BASED ADHESIVES Ultrabond Eco S945 1K Ultrabond S965 1K Ultrabond Eco S955 1K 47 47 47 48 48 ▼ ▼ SELF-LEVELLING SMOOTHING COMPOUNDS Ultraplan 17 Ultraplan Eco 17 Ultraplan Maxi 17 Fiberplan 1

Pagina 5-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza OL Adesilex PA...

Pagina 6 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza 8...

8 THIXOTROPIC SMOOTHING COMPOUNDS Nivorapid 21 Latex Plus 21 ▼ 35 35 ▼ 14 51 51 51 ▼ ▼ 37 37 37 Paints, stuccos, oils, base coats and coloured sealants for wooden flooring Abrasive and maintenance tools and products Adhesives for skirting and profiles ▼ COLOURED SEALANTS Silwood Silwood Decking ▼ 53 53 DETERGENTS Mapefloor Cleaner ED WAXES Mapelux Lucida Mapelux Opaca ABRASIVE PRODUCTS Ultracoat SR Ultracoat PAD TOOLS FOR PAINTS AND OILS Ultracoat Roller Plus Ultracoat Roller Finish Ultracoat Roller Oil Ultracoat Roller Quick Ultracoat Steel Spatula Ultracoat Roller Combi 65 Ultrabond Eco 575 Ultrabond P990 1K Ultrabond P997 1K T 73 73 73 ▼ ▼ ▼ WATER-BASED AND SOLVENT-BASED STUCCOS Ultracoat Acqua Plus 55 Ultracoat LS 55 WATER-BASED BASE COATS Ultracoat P920 2K 57 Ultracoat P920 S-T 57 Ultracoat Universal Base 57 WATER-BASED AND SOLVENT-BASED VARNISHES Ultracoat P915 Ultracoat P925 Ultracoat EL Ultracoat PF1 OILS Ultracoat Oil Ultracoat Oil Car

Pagina 6-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza 8 THIXOTROPIC ...

Pagina 7 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza e

...

e 67 67 69 69 ▼ ▼ 59 59 59 60 71 71 71 71 71 71 ▼ ▼ 63 63 Tools Alphabetical index of products Adesilex LC/R Adesilex LC/RP Adesilex PA Adesivil D3 Carbide Hygrometer Cleaner H Cleaner L Diluente PU Eco Prim Grip Eco Prim PU 1K Eco Prim PU 1K Turbo Eco Prim T Electronic Hygrometer Eporip Eporip Turbo Fiberplan Gun for sealants Gun for soft cartridges Latex Plus Lignobond Livigum Mapecem Mapecem Pronto Mapefloor Cleaner ED Mapefluid N200 Mapefluid PZ500 Mapelux Lucida Mapelux Opaca Mapeprim SP Mapesilent Band Mapesilent Band R Mapesilent Door Mapesilent Panel Mapesilent Roll Mapesilent Tape Mapesonic CR Nivorapid Planicrete Primer 3296 Primer EP Primer G Primer KL Primer M Primer MF Primer MF EC Plus Primer PA 41 41 43 41 75 37 37 29 25 30 30 25 75 35 35 18 75 75 21 45 27 11 12 65 11 11 67 67 26 5 6 6 5 5 6 6 21 13 27 30 25 26 26 31 31 27 Primer PU60 29 Prosfas 29 Pulicol 2000 37 Quartz 1.2 31 Silwood 53 Silwood Decking 53 Spiked Roller 75 Topcem 12 Topcem Pronto 12

Pagina 7-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza e

67 67

69...

Pagina 8 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

Triblock P 32 Trowels for adhesives 74 Trowels for levelling compounds 74 Ultrabond Eco 575 73 Ultrabond Eco P909 2K 48 Ultrabond Eco P992 1K 47 Ultrabond Eco S945 1K 51 Ultrabond Eco S955 1K 51 Ultrabond P-R9 48 Ultrabond P902 2K 45 Ultrabond P913 2K 45 Ultrabond P990 1K 47/73 Ultrabond P997 1K T 47/73 Ultrabond S965 1K 51 Ultracoat Acqua Plus 55 Ultracoat EL 59 Ultracoat LS 55 Ultracoat Oil 63 Ultracoat Oil Care 63 Ultracoat P915 59 Ultracoat P920 2K 57 Ultracoat P920 S-T 57 Ultracoat P925 59 Ultracoat PAD 69 Ultracoat PF1 60 Ultracoat Roller Combi 71 Ultracoat Roller Finish 71 Ultracoat Roller Oil 71 Ultracoat Roller Plus 71 Ultracoat Roller Quick 71 Ultracoat SR 69 Ultracoat Steel Spatula 71 Ultracoat Universal Base 57 Ultraplan 17 Ultraplan Eco 17 Ultraplan Maxi 17 Trowels for levelling compounds Trowels for adhesives Gun for soft cartridges Gun for sealants Spiked roller Carbide hygrometer Electronic hygrometer 74 74 75 75 75 75 75 Selection tables of Mapei products For the p

Pagina 8-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza Triblock P 32 ...

Pagina 9 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

reparation of screeds with special binders and pre-blended mortars For smoothing compounds For the preparation of substrates For the installation of wooden flooring 9 14 22 38 4 Soundproofing systems for flooring BINDERS FOR SCREEDS, SMOOTHING COMPOUNDS AND ADDITIVES 5 Mapesilent Panel Mapesilent Roll Mapesilent Band Soundproofing system for floating screeds, using tiles composed of a bitumen and special polymer-based elasto-plastomeric membrane with a polyester fibre backing layer. Applications: Mapesilent Panel is used to form an efficient soundproofing system on all types of floor slab. Mapesilent Panel is applied between the structure and the floating screed for laying all types of flooring materials. Technical data: Tensile strength: – longitudinal: 700 N/50 mm; – transverseal: 500 N/50 mm. Impact strength: 900 mm. Resistance to static perforation: 15 kg. Impermeability to water: > 100 KPa. Reaction to fire: F. Apparent dynamic rigidity (S’t): 10 MN/m³. Dynamic r

Pagina 9-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza reparation of ...

Pagina 10 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

igidity for calculation purposes (S’): 21 MN/m³. Reduction of noise caused by footsteps (ΔLw): 28 dB (*). Thermal resistance (R): 0.313 m²K/W. Nominal thickness: 13 mm. Format: 1000 mm x 1000mm tiles. Weight: 5 kg/m². Packaging pallets containing 75 m². Soundproofing system for floating screeds comprising sheets made from a polymer bitumen elasto-plastomeric membrane with a polyester fibre backing and a surface covered with a layer of blue non-woven polypropylene fabric. Applications: Mapesilent Roll is used to form a quick, efficient soundproofing system on all types of floor slab. Mapesilent Roll is applied between the structure and the floating screed for laying all types of flooring materials. Technical data: Tensile strength: – longitudinal: 700 N/50 mm; – transverseal: 500 N/50 mm. Impact strength: 900 mm. Resistance to static perforation: 15 kg. Impermeability to water: > 100 KPa. Reaction to fire: F. Apparent dynamic rigidity (S’t): 15 MN/m³. Dynamic rigidity for

Pagina 10-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza igidity for...

Pagina 11 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ...

calculation purposes (S’): 47 MN/m³. Reduction of noise caused by footsteps (ΔLw): 22.8 dB (*). Thermal resistance (R): 0.145 m²K/W. Nominal thickness: 8 mm. Format: 1.05 m wide x 10 m long rolls. Weight: 1.8 kg/m². Packaging pallets containing 160 m². L-shaped, closed-cell, expanded polyethylene adhesive membrane applied to perimeter walls and around the edges of items which pass through screeds, to avoid the formation of acoustic bridges. Applications: Mapesilent Band is applied to all the walls around the perimeter of the screed, to form a soundproofing system with Mapesilent Roll and Mapesilent Panel, and around all the edges of items which pass through the screed, to avoid the formation of acoustic bridges. The product is available in various sections (100 and 160 mm in height) denominated Mapesilent Band 50/100 and Mapesilent Band 50/160. Technical data: Thickness: 6 mm. Width at base: 50 mm. Height: 100 mm; 160 mm. Length: 2 m. Packaging – Cardboard boxes containing 1

Pagina 11-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza calculation...

Pagina 12 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza 05...

05 profiles 100 mm high by 2 m long. – Cardboard boxes containing 64 profiles 160 mm high by 2 m long. (*) calculated on a 300 kg/m² brick and cement floor slab. (*) calculated on a 300 kg/m² brick and cement floor slab. BINDERS FOR SCREEDS, SMOOTHING COMPOUNDS AND ADDITIVES 6 Mapesilent Band R Mapesilent Door Mapesonic CR Closed-cell, expanded polyethylene adhesive rolls applied to perimeter walls and around the edges of elements which pass through screeds to avoid the formation of acoustic bridges. Applications: Mapesilent Band R is applied to all the walls around the perimeter of the screed to form a soundproofing system with Mapesilent Roll and Mapesilent Panel, and around all the edges of items which pass through the screed, to avoid the formation of acoustic bridges. The product is available in various widths (100 and 160 mm) denominated Mapesilent Band R 50/100 and Mapesilent Band R 50/160. Technical data: Thickness: 5 mm. Width at base: 50 mm. Height: 100 mm; 160 m

Pagina 12-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza 05 profiles...

Pagina 13 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza m....

m. Length: 50 m. Packaging cellophane package with 4 rolls 50 m long. U-shaped, closed-cell, expanded polyethylene adhesive membrane applied around openings in perimeter walls to avoid the formation of acoustic bridges. Applications: Mapesilent Door is applied to all the openings in perimeter walls around the screed to form a soundproofing system with Mapesilent Roll and Mapesilent Panel. Technical data: Thickness: 6 mm. Width at base: 50 mm. Pitch: 105-110 mm. Height: 100 mm. Packaging cardboard boxes containing 30 pieces. Under-floor soundproofing system using cork, rubber and high quality polyurethane rolls. Applications: Mapesonic CR has the capacity to efficiently block the noise of footsteps transmitted by floor slabs. Mapesonic CR may be applied on top of any type of old substrate or floor before laying floor finishes (such as ceramic, stone, parquet and resilient floors). Mapesonic CR is used in the renovation of floor slabs where it is not possible or economically viable to

Pagina 13-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza m. Length: 50 ...

Pagina 14 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

completely re-build the substrate and floor covering. The product is available in thicknesses of 2 and 4 mm. Technical data: Thickness: 2 mm, 4 mm. Format: 30 x 1 m (2 mm thick) sheets; 20 x 1 m (4 mm thick) sheets. Density (kg/m³): 700. Colour: brown-black. Tensile strength EN ISO 1798 (N/mm²): 0.6. Elongation at break EN ISO 1798 (%): 20. Application temperature range: from ±5°C to +35°C. Fire resistance class EN 13501: Cfl-s1. Reduction of noise from footsteps EN ISO 140-8: 17 dB. Certificate: N° KB-050107K TS Mapesonic CR 2 mm + wood. N° KB-050107I TS Mapesonic CR 2 mm + ceramic. EMICODE: EC1 - very low emission. Mapesilent Tape Adhesive sealing tape made from closed-cell expanded polyethylene. Applications: Mapesilent Tape is used to seal overlaps between various pieces of Mapesilent Band, to cover and join overlaps between Mapesilent Band and Mapesilent Panel or Mapesilent Roll and to cover joints between Mapesilent Panel panels and overlaps between Mapesilent Roll. Tech

Pagina 14-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza completely...

Pagina 15 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

nical data: Thickness: 3 mm. Width: 100 mm. Length: 25 m. Packaging boxes containing 12 rolls 25 m long. Systems for soundprooﬁng buildings against noise caused by footsteps From Mapei research, the excellent soundprooﬁng systems to combat noise caused by footsteps 7 Under-screed Ideal for new work Under-ﬂoor Ideal for renovation work Mapesilent® Mapesonic CR A modular system including special panels, sheets and insulating accessories installed directly in contact with the ﬂoor slab before installing the screed. Soundprooﬁng mat in roll form applied before laying ceramic, stone, resilient and wooden ﬂoors. REGULATION SOUNDPROOFING FOR THE BUILDING INDUSTRY. 8 TOPCEM PRONTO, MAPECEM PRONTO AND ALL LEVELLING COMPOUNDS ARE CE MARKED AND CERTIFIED ACCORDING TO THE EUROPEAN CLASSIFICATION FOR PRE-BLENDED MORTARS FOR SCREEDS EN 13813 The European Standard for pre-blended mortars for screeds (EN 13813), “Screed material and floor screeds - Screed material Propertie

Pagina 15-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza nical data:...

Pagina 16 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza s ...

s and requirements”, has now become effective. This norm allows to classify the pre-blended mortars on the basis of the nature of the binders employed and on their physical and elasto-mechanical characteristics This norm has been extended to levelling compounds as well. In particular, the standard symbols illustrated here below have been adopted for TOPCEM PRONTO, MAPECEM PRONTO pre-blended mortars, and the levelling compounds of MAPEI range to indicate the following: • screeds made using TOPCEM PRONTO, in accordance with the indications contained in the Technical Data Sheet, are class CT (cementitious binder-based), C30 (compressive strength after 28 days equal to at least 30 N/mm²), F6 (flexural strength after 28 days equal to at least 6 N/mm²), A1fl (reaction to fire class); • screeds made using MAPECEM PRONTO, in accordance with the indications contained in the Technical Data Sheet, are class CT (cementitious binder-based), C60 (compressive strength after 28 days equal to

Pagina 16-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza s and...

Pagina 17 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza at...

at least 60 N/mm²), F10 (flexural strength after 28 days equal to at least 10 N/mm²), A1fl (reaction to fire class); C30-F7 2 LEVELLING COMPOUNDS • levelling compounds made using ULTRAPLAN, in accordance with the indications contained in the Technical Data Sheet, are class CT (cementitious binder based), C30 (compressive strength after 28 days equal to at least 30 N/mm²), F7 (flexural strength after 28 days equal to at least 7 N/mm²), A2fl (reaction to fire class). As with adhesives used for ceramic tiles, according to the European Directive 89/106 for products used in construction work, it is also obligatory to apply the CE mark on the packaging of pre-blended mortars for screeds and levelling compounds in order to favour free trade within the member states of the European Community. The CE mark on the packaging is a guarantee for the user that the manufacturer has respected the following directives: • the screed and the levelling compound, if made according to the indicat

Pagina 17-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza at least 60...

Pagina 18 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

ions contained in the Technical Data Sheet, possesses the mechanical characteristics and belongs to the reaction to fire class indicated by the CE mark; • the manufacturer has issued a signed Declaration of Compliance (EC Declaration) certificate, with which they assume all responsibility regarding declaration of the CE mark; • with reference to the “Directive 89/106”, the manufacturer is obliged to carry out the same controls as indicated for the CE mark regarding adhesives for ceramic tiles. Selection table of Mapei products for the preparation of screeds with special binders and pre-blended mortars MAPEI BINDER OR PRE-BLENDED MORTAR Mapecem PREPARATION OF THE MIXTURE To be mixed (1 bag) with 0-8 mm graded aggregate (140-160 kg) and water (10-12 kg) To be mixed (1 bag) only with water (1.7 litres) To be mixed (1 bag) with Gravel 0-8 mm or 0-8 mm graded aggregate (80-100 kg) and water (4-8 kg) To be mixed (1 bag) only with water (2.1-2.3 litres) TYPE OF SCREED Bonded Prep

Pagina 18-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ions contained...

Pagina 19 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

aration of the substrate Application of slurry bond coat: Planicrete: H2O: Topcem = 1 : 1 : 3 or with Eporip up to 3.5 cm Application of slurry bond coat: Planicrete: H2O: Topcem Pronto = 1 : 1 : 12 or with Eporip up to 3.5 cm Application of slurry bond coat: Planicrete: H2O: Mapecem 1 : 1 : 2 or with Eporip up to 3.5 cm Application of slurry bond coat: Planicrete: H2O: Mapecem Pronto 1 : 1 : 8 or with Eporip up to 3.5 cm Thickness of the screed Un-bonded Preparation of the substrate Laying of a polyethylene sheet overlapped at least 20 cm on joints, sealed with adhesive tape and rounded along the perimeter. Application along the perimeter and around columns (if any) of compressible material, such as foamed polyester, in thicknesses not lower than 5 mm. From 3.5 to 8 cm (for thicknesses higher than 8 cm, pour a light-weight cementitious mixture over which the polyethylene sheet will be placed. Make the screed at least 3.5 cm thick). Thickness of the screed Floating Minimum thicknes

Pagina 19-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza aration of the...

Pagina 20 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza s ...

s of the screed At least 4 cm, reinforced with a mesh. The thickness of the screed varies depending on insulating layer compressibility. For more details refer to the MAPEI Technical Service and/or consult the “Installation of Screeds for Laying Floors” Technical Notebook. Heating Addition of additive to the mixture Waiting time for the startup cycle Startup cycle no 4d no 4d no 1d no 1d Switch on the heating on minimum temperature. Increase the temperature 5°C every day until reaching the temperature when in service. Keep the temperature on the maximum for some days. Decrease the temperature +5°C every day until the screed reaches 15°-18°C. PERFORMANCES Waiting time before installing wood and resilients Compressive strength after 28 days (N/mm²) 4d ≥ 30 4d ≥ 30 1d ≥ 45 1d ≥ 60 N.B. - THIS TABLE IS MERELY INDICATIVE; FOR FURTHER INFORMATION, REFER TO THE TECHNICAL DATA SHEET FOR EACH PRODUCT Mapecem Pronto Topcem Topcem Pronto Preparation of screeds ADDITIVE

Pagina 20-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza s of the...

Pagina 21 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza S,...

S, BINDERS AND PRE-BLENDED MORTARS FOR SCREEDS 11 Mapefluid N200 Mapefluid PZ500 Mapecem Superplasticiser for concrete. Where to use: Mapefluid N200 can be used for manufacturing no-slump concrete for screeds by just reducing the w/c ratio therefore reducing the drying time. Mapefluid N200 is a brown-coloured liquid admixture with a base of polymers in water solution that disperse cement grains. Add Mapefluid N200 directly to the mixture after all the other ingredients (cement, aggregates, water). Mapefluid N200 can also be diluted into the mixing water beforehand but its superplasticizing action is less effective. Dosage 0.5 to 1.5 l per 100 kg of cement (0.4-1.3 l). Packaging 200 l, 25 and 10 kg drums - 1000 l tanks. Also available in bulk on request. Superplasticiser with pozzolanic effect for high quality and chemical resistant mortar and concrete. Where to use: Mapefluid PZ500 can be used for manufacturing no-slump concrete for screeds by just reducing the w/c ratio therefor

Pagina 21-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza S, BINDERS AND...

Pagina 22 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza e ...

e reducing the drying time. Mapefluid PZ500 improves all properties of the concrete. In particular, it provides higher mechanical strength, better waterproofing and durability. Mapefluid PZ500 must be added to the dry components of the mix (cement and aggregate) before the batching water. The Mapefluid PZ500 mix is placed and worked like normal concrete. Dosage 20-60 kg per m³ of mixture. Packaging 11 kg bags. Big bags are available on request. Special hydraulic binder for the preparation of rapid setting and drying (24 hours) screeds with controlled shrinkage. Where to use: Formation of floating and bonded screeds on both existing and new slabs for the installation of floors that are moisture sensitive (wood, PVC, linoleum, carpeting, rubber) or any other type of flooring where rapid drying and immediate laying is required. Mapecem must always be mixed with aggregates. Bonded screeds (less than 3.5 cm thick) and patching require the application of a Mapecem and Planicrete anchoring

Pagina 22-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza e reducing the...

Pagina 23 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

slurry. For floating screeds (at least 3.5 cm thick) lay a polyethylene sheet beforehand; for thicknesses of 4-5 cm the aggregates must be graded from 0 to 8 mm in diameter. Technical data: Recommended mixture ratio: 350 to 450 kg of Mapecem with 1 m3 of aggregate or Gravel 0/8 mm and with 80-160 kg of water depending on the aggregate moisture. Open time of the mixture at +23°C: 20-30 minutes. Application temperature range: from +5°C to +35°C. Set to light foot traffic: after 2-3 hours. Waiting time before installation: 24 hours for resilients and wood. Residual moisture after 24 h.: less than 2%. Storage: 12 months. Consumption 3.5-4.5 kg/m2 per cm of thickness. Packaging 20 kg bags. EN 934-2 T 3.1-3.2 EN 934-2 T 3.1-3.2-9 12 Mapecem Pronto Topcem Topcem Pronto Ready-to-use pre-blended mortar for fast-setting and drying (24 hours) screeds with controlled shrinkage. Where to use: Formation of both floating and bonded screeds on existing and new slabs for the installation of

Pagina 23-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza slurry. For...

Pagina 24 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

wood, PVC, linoleum, carpeting, rubber or any other type of flooring where fast drying or immediate laying is required. Mapecem Pronto is ready-to-use and must be mixed just with water. Mapecem Pronto is the ideal solution where good quality graded aggregate is hard to find or for job sites such as those in city centres where the logistics involved in mixing conventional binders can be difficult. Bonded screeds and patching (thicknesses less than 3.5 cm) require the application of a Mapecem Pronto and Planicrete anchoring slurry. Floating screeds (thicknesses above 3.5 cm) must be laid over a polyethylene sheet. Technical data: Mixing ratio: one 25 kg bag of Mapecem Pronto with 2.1-2.3 litres of water. Open time of the mixture: 20-30 minutes. Application temperature range: from +5°C to +35°C. Set to light foot traffic: after 2-3 hours. Waiting time before installation: 24 hours for resilients and wood. Residual moisture after 24 h: less than 2%. Storage: 12 months. Consumption 20-25

Pagina 24-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza wood, PVC,...

Pagina 25 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

kg/m2 per cm of thickness. Packaging 25 kg bags. Special hydraulic binder for the preparation of normal setting and fast drying (4 days) screeds with controlled shrinkage. Where to use: Formation of both floating and bonded screeds on existing and new slabs for the installation of wood, PVC, linoleum, rubber, carpeting or any other flooring where fast drying and laying is required. Bonded screeds (less than 3.5 cm thick) and patching require the application of a Topcem and Planicrete anchoring slurry. For floating screeds (at least 3.5 cm thick) lay a polyethylene sheet beforehand; for thicknesses of 4-5 cm the aggregates must be graded from 0 to 8 mm in diameter. Technical data: Recommended mixture ratio: 200 to 250 kg of Topcem with 1 m3 of aggregate (diameter from 0 to 8 mm) and with 120-140 kg of water for dry aggregate. Open time of the mixture: 40 to 60 minutes. Application temperature range: from +5°C to +35°C. Set to light foot traffic: after 12 hours. Waiting time before in

Pagina 25-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza kg/m2 per cm...

Pagina 26 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

stallation: 4 days for resilients and wood. Residual moisture after 4 days: less than 2%. Storage: 12 months. Consumption 2-2.5 kg/m2 per cm of thickness. Packaging 20 kg bags. Ready-to-use pre-blended mortar for fast-drying (4 days) normal setting screeds with controlled shrinkage and with very low emission of volatile organic compounds (VOC). Where to use: Formation of both floating and bonded screeds on existing and new slabs for the installation of floors that are moisture sensitive (wood, PVC, linoleum, carpeting, rubber etc.) or any other type of flooring where fast drying and laying is required. Topcem Pronto is ready-to-use and must be mixed just with water. Topcem Pronto is the ideal solution where good quality graded aggregate is hard to find or for job sites such as those in city centres where the logistics involved in mixing conventional binders can be difficult. Bonded screeds and patching (thicknesses less than 3.5 cm) require the application of a Topcem Pronto and Plani

Pagina 26-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza stallation: 4 ...

Pagina 27 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

crete anchoring slurry. Floating screeds (thicknesses above 3.5 cm) must be laid over a polyethylene sheet. Technical data: Mixing ratio: one 25 kg bag of Topcem Pronto with 1.7 l of water. Open time of the mixture: 40-60’. Application temperature range: from +5°C to +35°C. Set to light foot traffic: after 12 hours. Waiting time before installation: 4 days for resilients and wood. Residual moisture after 4 days: less than 2%. EMICODE classification: EC1 R Plus - very low emission. Storage: 12 months. Consumption 18-20 kg/m2 per cm of thickness in relation to the degree of compaction. Packaging 25 kg bags. EN 13813 EN 13813 ADDITIVES, BINDERS AND PRE-BLENDED MORTARS FOR SCREEDS 13 Planicrete Synthetic rubber latex for improving adhesion and mechanical strength of cementitious mortars. Where to use: • Additive for cementitious smoothing compounds. Additive for improving the mechanical and adhesive strength of cementitious mixes for screeds, renders, thin levelling mortars, e

Pagina 27-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza crete...

Pagina 28 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza tc...

tc. • Additive for the preparation of cement based slurries to form bonded screeds, for filling depressions and repairing parts of screeds, cementitious floors etc. • Additive for spatterdash to provide adhesion key for renders. Do not use pure Planicrete as a primer or slurry, always mix it with Portland cement, or, when required, with Mapecem or Topcem. Technical data: Consistency: liquid. Colour: greenish white. Flammable: no. Application temperature range: from +5°C to +40°C. Storage: 12 months. Consumption depending on dilution and thickness of the mortar. Packaging 25 - 10 - 5 - 1 kg drums. Selection table of Mapei products for smoothing compounds 14 SMOOTHING COMPOUNDS Cementitious screeds MAPECEM, MAPECEM PRONTO, TOPCEM, TOPCEM PRONTO* screeds Concrete structures Anhydrite screeds Heated screeds Metal and wood surfaces Terrazzo, ceramic KEY These symbols are used to identify MAPEI products which give off a low level of volatile organic compounds (VOC) as certified by

Pagina 29 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ...

GEV (Gemeinschaft Emissionskontrollierte Verlegewerkstoffe, Klebstoffe und Bauprodukte e.V.), an international organisation for controlling the level of emissions from products used for floors. MAPEI recommended N.B. - THIS TABLE IS MERELY INDICATIVE; FOR FURTHER INFORMATION, REFER TO THE TECHNICAL DATA SHEET FOR EACH PRODUCT ● ■ ▲ ✚ ◆ ✽ Recommended by MAPEI Recommended by MAPEI. A first coat of Primer G (according to the instructions on the technical data sheet) diluted 1 : 1 with water is recommended For use only when a coat of Primer G or Eco Prim T is applied beforehand Only on wood when a coat of Mapeprim SP or Mapeprim 1K is applied beforehand Only for the preparation of substrates before installing wooden floating flooring Recommended by MAPEI. A first coat of Eco Prim T or Mapeprim SP is recommended Nivorapid + Latex Plus Nivorapid Fiberplan Ultraplan Ultraplan Eco Ultraplan Maxi Substrates ADDITIVES, BINDERS AND PRE-BLENDED MORTARS FOR SCREEDS 15 Pr

Pagina 29-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza GEV...

Pagina 30 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

ivate house - Naples - Italy 16 Self-levelling smoothing compounds ADDITIVES, BINDERS AND PRE-BLENDED MORTARS FOR SCREEDS 17 Ultraplan Ultraplan Eco Ultraplan Maxi Ultra-fast hardening (12 hours) selflevelling smoothing compound for thicknesses from 1 to 10 mm and with very low emission of volatile organic compounds (VOC). Where to use: • Interior levelling of new or existing substrates, as long as they are not subject to rising damp, to make them ready to receive all types of flooring where a high resistance to traffic and loads is required. • Levelling existing flooring as long as they are solid, dry and clean. Ultraplan is applied up to 10 mm thick per coat. The minimum thickness of Ultraplan must be 3 mm when a wooden floor is going to be installed. Technical data: Consistency: fine powder. Colour: pinkish-grey. Pot life: 20-30 minutes. Setting time: 45-60 minutes. Set to light foot traffic: 3 hours. Waiting time before installation: 12 hours. Application temperature

Pagina 30-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ivate house - ...

Pagina 31 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

range: from +5°C to +30°C. Mixing ratio: 25-26 parts water for 100 parts by weight of Ultraplan. Storage: 12 months. EMICODE: EC1 Plus - very low emission. Application: with a flat trowel and a pump. Consumption 1.6 kg/m2 per mm of thickness. Packaging 23 kg bags. Ultra-fast hardening (12 hours) self-levelling smoothing compound for thicknesses from 1 to 10 mm, with very low emission of volatile organic compounds (VOC). Where to use: • Interior levelling of new or existing substrates, as long as they are not subject to rising damp, to make them ready to receive all types of flooring where a high resistance to traffic and loads is required. • Levelling existing flooring as long as they are solid, dry and clean. Ultraplan Eco is applied with a trowel or with a pump up to 10 mm thick per coat. The minimum thickness of Ultraplan Eco must be 3 mm when a wooden floor is going to be installed. Technical data: Consistency: fine powder. Colour: pinkish-grey. Pot life: 20-30 minutes. Sett

Pagina 31-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza range: from...

Pagina 32 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

ing time: 45-60 minutes. Set to light foot traffic: 3 hours. Waiting time before installation: 12 hours. Application temperature range: from +5°C to +30°C. Mixing ratio: 24-25 parts water for 100 parts by weight of Ultraplan Eco. EMICODE: EC1 - very low emission. Storage: 12 months. Application: with a flat trowel and a pump. Consumption 1.6 kg/m2 per mm of thickness. Packaging 23 kg bags. C25-F7 A2fl-s1 LEVELLING COMPOUNDS Ultra-fast hardening self-levelling smoothing compound for thicknesses from 3 to 30 mm and with very low emission of volatile organic compounds (VOC). Where to use: • Interior levelling of new or existing substrates, as long as they are not subject to rising damp, to make them ready to receive all types of flooring where high mechanical strength is required. • Levelling existing flooring as long as they are solid, dry and clean. Ultraplan Maxi is applied from 3 to 30 mm per coat. Technical data: Consistency: fine powder. Colour: grey. Pot life: 30-40 minutes.

Pagina 32-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ing time:...

Pagina 33 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ...

Setting time: 60-90 minutes. Set to light foot traffic: approx. 3 hours. Waiting time before installation: 24-72 hours, depending on thickness and temperature. Application temperature range: from +5°C to +30°C. Mixing ratio: 18-19 parts water for 100 parts by weight of Ultraplan Maxi. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: with a flat trowel and a pump. Consumption 1.7 kg/m2 per mm of thickness. Packaging 25 kg bags. C30-F7 A2fl-s1 LEVELLING COMPOUNDS C35-F7 A2fl-s1 LEVELLING COMPOUNDS EN 13813 EN 13813 EN 13813 18 Fiberplan Fibre-reinforced ultra-fast hardening (12-24 hours) self-levelling smoothing compound for thicknesses from 3 to 10 mm. Where to use: Interior smoothing of existing and new wooden flooring, wooden boarding, chipboard panels, ply-wood, that are sufficiently anchored and where a good resistance to loads and traffic is required. Levelling cement, terrazzo, existing ceramic tile and natural stone substrates. Technical data:

Pagina 33-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza Setting time:...

Pagina 34 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ...

Consistency: fine powder. Colour: pinkish-grey. Pot life: 20-30 minutes. Setting time: 45-60 minutes. Set to light foot traffic: 3 hours. Waiting time before installation: 12 hours. Application temperature range: from +5°C to +30°C. Mixing ratio: 24-26 parts water for 100 parts by weight of Fiberplan. Storage: 12 months. Application: flat trowel. Consumption 1.5 kg/m2 per mm of thickness. Packaging 25 kg bags. C25-F7 A2fl-s1 LEVELLING COMPOUNDS EN 13813 ADDITIVES, BINDERS AND PRE-BLENDED MORTARS FOR SCREEDS 19 Ivory Club - Frankfurt - Germany 20 Thixotropic smoothing compounds ADDITIVES, BINDERS AND PRE-BLENDED MORTARS FOR SCREEDS 21 Nivorapid Latex Plus Ultra-fast setting thixotropic cementitious levelling mortar for horizontal or vertical surfaces for thicknesses from 1 to 20 mm and with very low emission of volatile organic compounds (VOC GEV - EC1 R Plus). Where to use: Interior smoothing of all substrates normally used in the building industry as long as they ar

Pagina 34-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza Consistency: ...

Pagina 35 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza e ...

e not subject to moisture and are clean, such as: • concrete slabs and walls, masonry, renders and cementitious screeds, etc.; • also suitable for existing floor and wall ceramic tile, natural stone and terrazzo coverings; • suitable for repairing or levelling steps, edges of pillars, depressions and holes in flooring, walls and ceilings. Especially recommended when the substrates need to be covered within a short time. It is applied from 1 to 20 mm per coat. For installing wooden floorings the minimum thichness required is at least 3 mm. Technical data: Consistency: fine powder. Colour: grey. Pot life: 15 minutes. Setting time: 15-25 minutes. Set to light foot traffic: approximately 2 hours. Waiting time before installation: 12 hours. Application temperature range: from +5°C to +35°C. Mixing ratio: 21-23 parts in weight of water for 100 parts of Nivorapid. EMICODE: EC1 R Plus - very low emission. Storage: 12 months. Application: flat trowel. Consumption 1.6 kg/m2 per mm of thi

Pagina 35-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza e not subject ...

Pagina 36 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

ckness. Packaging 25 kg bags. LEVELLING COMPOUNDS Admixture to be mixed with Nivorapid to improve the deformability and adhesion onto difficult surfaces. Where to use: Latex Plus mixed with Nivorapid produces a cementitious levelling compound with such flexibility and high bonding strength to be used in interiors for levelling highly deformable surfaces such as: • PVC, ceramic tiles, rubber linoleum, strong non-woven; • properly fixed wood plank flooring, chipboard, plywood; • metal substrates. Levelling compounds prepared with Nivorapid mixed with Latex Plus and applied in thicknesses from 3 to 20 mm suitable to receive every type of resilient or textile flooring. Technical data: Consistency: liquid. Colour: white. Flammable: no Pot life: 20 minutes Setting time: 30 minutes. Set to light foot traffic: after 2 hours. Application temperature range: from +5°C to +30°C. Waiting time before bonding: 12-24 hours. Mixing ratio: 8-8.5 kg of Latex Plus per 25 kg bag of Nivorapid. Appl

Pagina 36-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ckness....

Pagina 37 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

ication: flat trowel. Consumption 0.6 kg/m2 per mm of thickness. Packaging 10 kg drums. C40-F10 A2fl-s1 EN 13813 Selection table of Mapei products for the preparation of substrates 22 PRIMER Turbo (3) (6) (7) (3) (2) Repairing cracks with Eporip or Eporip (5) (5) (1) (5) Eco Prim Grip FLOORS New Cementitious screeds MAPECEM, MAPECEM PRONTO, TOPCEM, TOPCEM PRONTO* screeds Concrete floors Anhydrite screeds Heating screeds Metal surfaces Existing Ceramic tiles, porcelain tiles Terrazzo, Palladiana Natural stone Concrete floors and screeds KEY This symbol is used to identify MAPEI products which give off a low level of volatile organic compounds (VOC) as certified by GEV (Gemeinschaft Emissionskontrollierte Verlegewerkstoffe, Klebstoffe und Bauprodukte e.V.), an international organisation for controlling the level of emissions from products used for floors. MAPEI recommended primers N.B. - THIS TABLE IS MERELY INDICATIVE; FOR FURTHER INFORMATION, REFER TO THE TECHNICAL

Pagina 37-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ication: flat ...

Pagina 38 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ...

DATA SHEET FOR EACH PRODUCT * Mapecem, Mapecem Pronto, Topcem, Topcem and Pronto screeds do not need any treatment against dust and they do not need consolidation as long as they have been prepared according to the suggestions on the relative technical data sheets. 1) To be used exclusively with Lignobond, Ultrabond P902 2K and Ultrabond P913 2K 2) To be used exclusively with Ultrabond P990 1K, Ultrabond Eco P992 1K, Ultrabond Eco S955 1K, Ultrabond Eco S945 1K or Ultrabond S965 1K. 3) Livigum diluted with water 1:4 - 1:5 and Primer 3296 diluted 1:1 - 1:2 to be applied on sound substrates that have slight surface dust before installing with vinyl adhesives (Adesilex LC, LC/R and LC/RP) 4) Before the installation of wood with Adesilex PA 5) For the consolidation of screeds whose surface is unsound and in the presence of residual damp above that accepted for the installation of wood before bonding wooden floors with Lignobond, Ultrabond P902 2K, Ultrabond P913 2K, Ultrabond P990 1K, Ul

Pagina 38-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza DATA SHEET...

Pagina 39 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

trabond Eco P992 1K and Ultrabond Eco S955 1K (N.B. Onto heating screed, Primer MF, Primer MF EC Plus, Eco Prim PU 1K or Eco Prim PU 1K Turbo can be used only as a consolidating treatment). 6) As a waterproofer of screeds with residual damp above that accepted for the installation of wood 7) As adhesion promoters before applying levelling compounds Mapeprim SP Primer PU60 Primer EP Eco Prim PU 1K Turbo Primer 3296 Substrates (5) (4) (5) (6) (7) Eco Prim T Primer MF Primer MF EC Plus Primer PA Triblock P Primer KL Primer M Eco Prim PU 1K Primer G Livigum Prosfas (7) (7) PRIMERS, CONSOLIDATING COMPOUNDS, MOISTURE BARRIERS, SEALANTS AND CLEANING MATERIALS 23 Hotel Messe Wien - Vienna - Austria 24 Adhesion promoters PRIMERS, CONSOLIDATING COMPOUNDS, MOISTURE BARRIERS, SEALANTS AND CLEANING MATERIALS 25 Primer G Eco Prim T Eco Prim Grip Synthetic resin based primer in water dispersion with very low emission of volatile organic compounds (VOC). Where to u

Pagina 39-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza trabond Eco...

Pagina 40 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

se: Treating gypsum or anhydrite surfaces prior to applying cementitious products. The surfaces to be treated must be clean and porous. Primer G should be diluted with water from 1:1 to 1:3 to protect old porous floors, to fix the residual dust and to uniform the substrates absorption prior to levelling. Apply on perfectly dry gypsum or anhydrite surfaces (residual moisture less than 0.5%). The substrate must be dry and clean, free from oil, grease, traces of paint and any loose particles. Technical data: Consistency: liquid. Colour: light blue. Flammable: no. Application temperature range: from +5°C to +40°C. Drying time: 2 hours, varies according to the dilution and absorbency of the substrate. EMICODE: EC1 - very low emission. Storage: 24 months. Protect from frost. Application: by roller and brush. Consumption 0.1-0.2 kg/m2 depending on the use. Packaging 25 - 10 - 5 - 1 kg plastic drums. Solvent-free acrylic primer with very low emission of volatile organic compounds (VOC - GEV

Pagina 40-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza se: Treating...

Pagina 41 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ...

EC1 R Plus) for porous and non porous surfaces. Where to use: All-purpose primer for improving adhesion of levelling compounds on all porous and nonporous surfaces: cement, gypsum, anhydrite, asphalt, wood, terrazzo. Particularly indicated as bonding promoter for smoothing compounds on residues of old adhesives for resilient and textile floorings. Technical data: Consistency: liquid. Colour: white. Flammable: no. Application temperature range: from +5°C to +40°C. EMICODE: EC1 Plus - very low emission. Storage: 24 months. Protect from frost. Application: by roller and brush. Consumption 0.10-0.20 kg/m2. Packaging 20 and 5 kg drums. Multi-purpose, ready-to-use acrylic resin and inert silica based bonding promoter and primer, with extremely low emission level of volatile organic compounds (VOC - GEV EC1 Plus). Suitable for renders, smoothing and levelling compounds and adhesives for ceramics. Where to use: Preparing smooth, sound and non-absorbent substrates such as ceramic and natura

Pagina 41-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza EC1 R Plus)...

Pagina 42 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza l ...

l stone surfaces prior to smoothing and levelling them with suitable MAPEI products. It may also be used as: • to prepare flat, compact and non porous substrates such as ceramic tile and stone material floor and wall coverings before the application of MAPEI smoothing and levelling compounds; • it may be used as multi-purpose, ready-to-use bonding promoter for renders. Technical data: Consistency: creamy liquid. Colour: grey. Waiting time before applying render: 30 minutes. Waiting time before applying smoothing compound: 30 minutes. Application temperature range: from +5°C to +35°C. EMICODE: EC1 Plus - extremely low emission level. Storage: 24 months. Application: by roller or brush. Consumption 0.20-0.30 kg/m2. Packaging 5 kg and 10 kg drums. 26 Mapeprim SP Primer KL Primer M Solvent-free two-component primer. Where to use: Improves the bonding of smoothing and levelling compounds on gypsum and anhydrite, on very flat and compact surfaces such as ceramic tiles and natural

Pagina 42-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza l stone...

Pagina 43 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ...

stone. Wait until Mapeprim SP becomes transparent before applying levelling compounds. Use Mapeprim SP only on dry surfaces that are not subject to rising damp. The substrate must be dry and clean, free from oil, grease, traces of paint and any other loose particles. Technical data: Consistency: Part A: liquid; Part B: liquid. Colour: Part A: light blue; Part B: white. Flammable: no. Application temperature range: from +5°C to +40°C. Pot life: approx. 1 hour. Mixing ratio: Part A : Part B = 1 : 1. Waiting time before application of smoothing compound: between 1 and 3 hours depending on the ambient conditions. Maximum time for application of smoothing compound: 24 hours. Storage: 24 months. Application: by brush, roller or flat trowel. Consumption 0.10-0.20 kg/m2. Packaging 4 and 2 kg drums. Adhesion promoter on nonporous surfaces for epoxy, epoxypolyurethane and two-component polyurethane adhesives. Where to use: Adhesion promoter for Lignobond, Ultrabond P902 2K and Ultrabond P913

Pagina 43-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza stone. Wait...

Pagina 44 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ...

2K on existing flooring in: • ceramic tiles; • porcelain tiles; • glass mosaic; • marble; • terrazzo; • etc. After the application with a wet cotton cloth, it is important that dust, dirt or any other substance that could interfere with the bonding of the adhesive used for installing the wooden flooring does not deposit over the surface. Primer KL may be used as well to dilute the first coat of Primer MF (1 kg of Primer KL, corresponding to 0.8 liters, for each 6 kg of Primer MF A+B). Technical data: Consistency: liquid. Colour (pinkish): transparent. Flammable: yes. Application temperature range: from +5°C to +35°C. Drying time: 5 minutes. Storage: 12 months. Application: wet cotton cloth. Consumption 30-40 g/m2. Packaging 0.8 kg bottles in boxes of 12 and 8 kg metallic drums. Solvent-free, one-component primer for polyurethane adhesives, for nonabsorbent surfaces. Where to use: To improve the bonding of Ultrabond P990 1K, Ultranond Eco P992 and Ultrabond Eco S955 1K o

Pagina 44-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza 2K on...

Pagina 45 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza n ...

n non-absorbent surfaces, such as metals (iron, steel, aluminium, copper, zinc-plated sheets, etc.). Primer M is ready for use, and is applied by brush or a roller in a thin, uniform coat. The successive layer of adhesive must only be applied once the primer is no longer sticky to the touch (after approximately 40 minutes at +23°C and 50% R.H.). Technical data: Consistency: liquid. Colour: transparent. Flammable: no. Application temperature range: from +5°C to +35°C. Drying time: 40 minutes. Storage: 12 months. Application: by brush or roller. Consumption 50-60 g/m2. Packaging 250 g canisters. PRIMERS, CONSOLIDATING COMPOUNDS, MOISTURE BARRIERS, SEALANTS AND CLEANING MATERIALS 27 Primer 3296 Livigum Primer PA Aqueous acrylic primer with excellent penetration effect for dusty screeds. Where to use: Consolidation of unsound substrates. Preparation of unsound screed surfaces before the installation of wooden flooring with vinyl adhesives. Primer for cementitious smoothing compou

Pagina 46 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

nds. Technical data: Consistency: liquid. Colour: opalescent. Flammable: no. Application temperature range: from +10°C to +35°C. Dilution: no, 1:1 or 1:2 with water depending on the absorption of the substrate. Drying time: 1-5 days. Waiting time before laying with vinyl adhesives: when dry. Storage: 12 months. Application: roller, large brush, brush or watering can. Consumption 0.1-0.5 kg/m2. Packaging 10 and 5 kg drums. Additive in water dispersion for cementitious smoothing compounds and mortars. Where to use: • Additive for improving the mechanical and adhesion strength of cementitious screeds, renders and coatings. • Additive for the preparation of cement based slurries to form bonded screeds, for filling depressions and repairing parts of screeds. • Diluted 1:4 - 1:5 with water, it fixes surface dust on screeds before the installation of wooden flooring with vinyl adhesives. Livigum can be diluted from 1:2 to 1:5 with water depending on the type of application. Technical

Pagina 46-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza nds. Technical...

Pagina 47 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ...

data: Consistency: viscose liquid. Colour: white. Flammable: no. Application temperature range: from +5°C to +35°C. Storage: 12 months. Protect from frost. Consumption depending on dilution. Packaging 25 - 10 - 5 kg drums. Ready-to-use synthetic resin based solvent primer for bonding with Adesilex PA. Where to use: Preparation of substrates before the laying of wooden flooring with Adesilex PA adhesive. Primer PA dries rapidly, penetrates into the substrate and ensures excellent adhesion to Adesilex PA. Technical data: Consistency: liquid. Colour: red. Flammable: yes. Application temperature range: from +10°C to +35°C. Drying time: 4-48 hours depending on the absorption. Waiting time before laying with Adesilex PA: 1-2 days. Storage: 12 months. Application: brush, roller, trowel. Consumption 0.5-0.6 kg/m2 Packaging 10 kg drums. Primers, consolidating compounds and/or moisture barriers 28 PRIMERS, CONSOLIDATING COMPOUNDS, MOISTURE BARRIERS, SEALANTS AND CLEANING MATERIALS 29

Pagina 47-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza data:...

Pagina 48 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ...

Prosfas Primer PU60 Diluente PU Solvent-free silicate based consolidating compound for cementitious substrates. Where to use: Consolidation of cementitious substrates with poor consistency even in depth, hardening cementitious screeds that tend to crumble on the surface. To prevent the formation of an anti-adhesive film, sprinkle dry sand on the surface of the final coat to facilitate bonding of the next treatment. The substrate must be dry and clean, free of oil, grease, paint and any loose particles. Technical data: Drying time: varies according to the absorbency of the substrate. Consistency: liquid. Colour: transparent. Flammable: no. Application temperature range: from +5°C to +35°C. Storage: 24 months. Protect from frost. Application: by roller, brush or watering can. Consumption 0.5-0.7 kg/m2. Packaging 25 kg drums. One-component polyurethane moisture curing primer in solvent for consolidating and waterproofing cementitious screeds. Where to use: Waterproofing porous ceme

Pagina 48-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza
Prosfas
...

Pagina 49 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

ntitious screeds that have residual moisture higher than the maximum quantity acceptable for the installation of wooden flooring. Consolidation of unsound substrates and/or with poor mechanical strength. Anti-dust treatment of cementitious and anhydrite screeds. During application, provide suitable ventilation. If smoothing compounds or adhesives will be used after the application of Primer PU60, spread Quartz 1.2 or dry clean sand over the just treated surface in order to improve the bonding strength of the products to be applied. Technical data: Consistency: liquid. Colour: brown. Flammable: yes. Application temperature range: from +5°C to +35°C. Dilution: from 25 to 100% with Thinner PU. Set to light foot traffic: depending on the dilution, 3-8 hours. Hardening time: 24 hours. Waiting time before laying with reactive glues: 2-7 days. Storage: 12 months. Application: roller or brush. Consumption 0.4-1.2 kg/m2. Packaging 10 kg drums. Thinner in solvent specific for Primer PU60. Whe

Pagina 49-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ntitious...

Pagina 50 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza re...

re to use: Thinner for Primer PU60 and all one and two-component polyurethane products. Technical data: Consistency: liquid. Colour: transparent. Flammable: yes. Storage: 12 months. Consumption 0.25-1 l per litre of Primer PU60, depending on the dilution necessary. Packaging 9 kg drums. 30 Eco Prim PU 1K Eco Prim PU 1K Turbo Primer EP One-component, solvent-free, hygro-hardening polyurethane primer with very low emission of volatile organic compounds (VOC - GEV EC1 Plus), for consolidating and waterproofing cementitious screeds. Where to use: Waterproofing cementitious screeds with a residual moisture content higher than the maximum level recommended for laying wooden floors. Consolidating unstable and/ or mechanically weak substrates. Anti-dust treatment for cementitious and anhydrite screeds with a disjointed surface. It may also be blended with quartz and used as a binder to mix synthetic mortar for small smoothing and repair operations. If smoothing compound or parquet floor

Pagina 50-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza re to use:...

Pagina 51 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza is...

is to be laid after applying Eco Prim PU 1K, Quartz 1.2 or clean, dry sand must be sprinkled on the surface immediately after treatment to improve the bond of successive applications. If sand is not sprinkled on the surface, the wooden floor must be laid within 12-36 hours using a reactive polyurethane adhesive (such as Ultrabond P990 1K) or an epoxypolyurethane adhesive (such as Lignobond or Ultrabond P902 2K). Parquet may also be laid without sprinkling on the quartz, as long as the reactive adhesive (Ultrabond P990 1K, Ultrabond Eco P992 1K, Ultrabond Eco S955 1K, Ultrabond P902 2K, Ultrabond P913 2K or Lignobond) is applied on the final layer of primer within 3 days. Technical data: Consistency: liquid. Colour: brown. Flammable: no. Recommended application temperature range: from +5°C to +35°C. Set to light foot traffic: after 9-10 hours. Waiting time before laying parquet using reactive adhesives: min. 24 hours, max. 3 days. Waiting time before laying parquet or smoothing layer

Pagina 51-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza is to be laid ...

Pagina 52 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza on...

on surfaces sprinkled with quartz: 36 hours. EMICODE: EC1 R - very low emission. Storage: 12 months. Application: by roller or brush. Consumption: 0.2-0.4 kg/m2. Consumption 0.2-0.4 kg/m2 per coat. Packaging 10 kg drums. One-component, solvent-free, damphardening, rapid-drying polyurethane primer with very low emission of volatile organic compounds (VOC GEV EC1 Plus) for consolidating and waterproofing cementitious screeds. Where to use: Consolidating and dust-repelling treatments on cementitious, anhydrite and heated substrates with a crumbly surface. Waterproofing cementitious screeds with a residual humidity content higher than the maximum level recommended for laying wooden floors. If smoothing compound or adhesive is to be spread on the surface after applying Eco Prim PU 1K, Quarzo 1.2 or clean, dry sand must be sprinkled on the surface immediately after treatment to improve the bond of successive layers. Instead of sprinkling on quartz, bonding of the smoothing compound may be i

Pagina 52-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza on surfaces...

Pagina 53 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

mproved by applying a coat of Eco Prim T on the surface of Eco Prim PU 1K when it is dry and ready to be stepped on (after approximately 2 hours). Parquet may also be laid without sprinkling on the quartz, as long as the reactive adhesive (Ultrabond P990 1K, Ultrabond Eco P992 1K, Ultrabond Eco S955 1K, Ultrabond P902 2K, Ultrabond P913 2K or Lignobond) is applied on the final layer of primer within 3 days. Technical data: Consistency: liquid. Colour: brown. Flammable: no. Recommended application temperature range: from +5°C to +35°C. Set to light foot traffic: after 2-3 hours. Waiting time before laying parquet using reactive adhesives: minumum 2 hours, max. 3 days. Waiting time before laying parquet or smoothing layer on surfaces sprinkled with quartz: 2 hours. EMICODE: EC1 R Plus - very low emission. Storage: 12 months. Application: by roller or brush. Consumption: 0.1-0.45 kg/m2. Packaging 10 kg drums. Two-component waterproofing and consolidating primer, in solvent solution, fo

Pagina 53-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza mproved by...

Pagina 54 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza r ...

r screeds and industrial flooring. Where to use: • Primer for the consolidation of surfaces of dusty or crumbly cementitious screeds, for anhydrite screeds, old terrazzo tiles, gypsum and gypsum board. • Waterproofing damp screeds to isolate residual moisture. • Anti-dust impregnating primer over industrial flooring, garages, raised flooring. If a levelling compound is used after the application of Primer EP, spread dry sand over the just treated surface to create a suitable mechanical key. The substrate must be dry and clean, free of oil, grease, traces of paint and any loose particles. Technical data: Minimum drying time: 24 hours depending on the porosity of the substrate. Consistency: liquid. Colour: transparent. Flammable: yes. Application temperature range: from +10°C to +40°C. Pot life of the mixture: 4-5 hours. Mixing ratio: Part A : Part B = 1 : 1. Storage: 24 months. Application: by roller, brush or watering can. Consumption 0.5-0.7 kg/m2. Packaging 5+5 kg drums. PR

Pagina 54-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza r screeds and ...

Pagina 55 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

IMERS, CONSOLIDATING COMPOUNDS, MOISTURE BARRIERS, SEALANTS AND CLEANING MATERIALS 31 Quartz 1.2 Primer MF Primer MF EC Plus Washed and dried siliceous sand with controlled grading to be used to ensure bonding over resins or epoxy primers. Where to use: Can be used in all cases where rough surfaces are absolutely necessary to help the adhesion of smoothing compounds and adhesives over resins or epoxy and polyurethane primers. Technical data: Colour: grey - beige. Grading: 0.7-1.2. Packaging 25 kg bags. Two-component solvent-free epoxy primer to be used as an adhesion promoter for products from the Mapefloor range and to consolidate and waterproof cementitious substrates. Where to use: • Consolidating compound by impregnation of cementitious screeds, also radiant heated screeds, and unsound anhydrite screeds. • Consolidating impregnation with anti-dust effect of concrete floors in garages, warehouses, industries, etc. and cementitious surfaces before the installation of raised

Pagina 55-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza IMERS,...

Pagina 56 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ...

flooring. • Waterproofing screeds and concrete floors to prevent the excess rising of residual moisture. In order to improve the penetration properties into the screed’s thickness, the first coat of Primer MF may be diluted with Primer KL (max. 0.8 liters, corresponding to 1 kg, of Primer KL for every 6 kg of Primer MF A+B). If smoothing compounds or adhesives will be used after the application of Primer MF, spread Quartz 1.2 or dry clean sand over the just treated surface in order to improve the bonding strength of the products to be applied. Technical data: Consistency: liquid. Colour: transparent yellow. Flammable: no. Application temperature range: from +10°C to +35°C. Waiting time before the installation of floors or application of smoothing compounds: 24-48 hours depending on the temperature. Pot life: 90 minutes. Mixing ratio: part A : part B = 3 : 1. Storage: 24 months. Application: roller and brush. Consumption 0.2-0.3 kg/m2, varies according to the absorption of the su

Pagina 56-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza flooring. •...

Pagina 57 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

bstrate. Packaging 1 kg (A+B) and 6 kg (A+B) units. Two-component, solvent-free, low viscosity epoxy primer to consolidate and waterproof cementitious substrates with very low emission of volatic organic compounds (VOC - GEV EC1 Plus). Where to use: • Consolidating compound by impregnation of cementitious screeds, also radiant heated screeds, and unsound anhydrite screeds. • Consolidating impregnation with anti-dust effect of concrete floors in garages, warehouses, industries, etc. and cementitious surfaces before the installation of raised flooring. • Waterproofing screeds and concrete floors to prevent the excess rising of residual moisture. Primer MF EC Plus is characterised by its low viscosity which gives it good penetration capacity through the thickness of the screed without being diluted. If smoothing compounds or adhesives will be used after the application of Primer MF, spread Quartz 1.2 or dry clean sand over the just treated surface in order to improve the bonding st

Pagina 57-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza bstrate....

Pagina 58 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

rength of the products to be applied. Technical data: Consistency: liquid. Colour: transparent yellow. Flammable: no. Application temperature range: from +10°C to +30°C. Waiting time before the installation of floors or application of smoothing compounds: 24 hours. Pot life: 40 minutes. Mixing ratio: Part A : Part B = 4 : 1. EMICODE: EC1 R Plus - very low emission. Storage: 24 months. Application: roller and brush. Consumption 0.2-0.3 kg/m2, varies according to the absorption of the substrate. Packaging 5 kg (A+B) units. 32 Triblock P Three-component, epoxy-cementitious primer for waterproofing damp substrates, including non-absorbent ones. Where to use: Triblock P is used as a waterproofing system for damp substrates, especially: • old ceramic or terrazzo floor dressings on substrates with excessive residual humidity; • cementitious substrates with a humidity content higher than the recommended level for laying wooden or resilient floors. Triblock P is a three-component epox

Pagina 58-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza rength of the ...

Pagina 59 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

ycementitious system which is diluted with water. It has the capacity of reticulating on even very smooth, sound damp surfaces and of forming a compact, waterproof layer which is suitable for laying parquet, PVC, linoleum, rubber and cementitious smoothing compounds. The surface must be dry, clean and free of grease, oil, traces of old paintwork and any other coating which may be removed. Technical data: Consistency: component A liquid; component B liquid; component C powder. Colour: component A white; component B white; component C white. Flammable: no. Recommended application temperature range: from +5°C to +35°C. Waiting time between the first and second coat: 4-6 hours. Waiting time before laying floors or smoothing compounds: 18 hours. Pot life: 30-40 minutes. Mixing ratio: component A : component B : component C = 12 : 38 : 50. Shelf life: 24 months. Application: by brush or roller. Consumption 0.5 kg/m2. Packaging 5 kg drums (A+B+C). PRIMERS, CONSOLIDATING COMPOUNDS, MOISTUR

Pagina 59-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ycementitious ...

Pagina 60 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza E ...

E BARRIERS, SEALANTS AND CLEANING MATERIALS 33 Canova Airport - Treviso - Italy 34 Sealants PRIMERS, CONSOLIDATING COMPOUNDS, MOISTURE BARRIERS, SEALANTS AND CLEANING MATERIALS 35 Eporip Eporip Turbo Two-component epoxy adhesive for cold joints and sealing of cracks in screeds. Solvent-free. Where to use: • Creation of cold joints between fresh and old concrete. • Stiff sealing of damages or cracks in screeds, cement floors, etc. When it is necessary to recreate the monolithic property of the structure, apply Eporip on clean and dry surfaces. The substrate must be clean, dry, free from oil, grease, traces of paint and other loose material. Technical data: Consistency: part A: fluid paste; part B fluid paste. Colour: part A: black; part B: white. Mixing ratio: part A : part B = 3 : 1. Flammable: no. Application temperature range: from +5°C to +30°C. Setting time: 24 hours. Workability: 60 minutes. Open time: 5 hours. Storage: 12 months. Application: by brush, trowel or

Pagina 60-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza E BARRIERS,...

Pagina 61 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza by...

by pouring. Consumption 0.5-2 kg/m2. Packaging 10 and 2 kg kit. Very fast hardening two-component polyester resin. Where to use: • Sealing cracks in screeds. • By adding dry sand, Eporip Turbo can be used to manufacture mortars for small reparations. Eporip Turbo hardens in approximately 20 minutes. Technical data: Consistency: part A: fluid paste; part B: fluid paste. Colour: part A: grey; part B: white. Mixing ratio: part A : part B = 500 : 8. Flammable: yes. Application temperature range: from +5°C to +30°C. Setting time: 20-30 minutes. Workability: 7 minutes. Storage: 12 months. Application: by trowel or by pouring. Consumption 1.7 kg per litre of cavity to be filled. Packaging 508 g metal cans (Part A: 500 g; Part B: 8 g). EN 1504-4 IN COMPLIANCE WITH EUROPEAN STANDARD EN 1504-4 STRUCTURAL BONDING 36 Cleaning materials PRIMERS, CONSOLIDATING COMPOUNDS, MOISTURE BARRIERS, SEALANTS AND CLEANING MATERIALS 37 Pulicol 2000 Cleaner L Cleaner H Solvent gel to remove ad

Pagina 61-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza by pouring....

Pagina 62 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

hesives and paint. Where to use: • Removal of old natural and synthetic resin based adhesives and paint. • Cleaning old adhesives from marble and ceramic flooring, levelling compounds, ceramic tiles, mosaic, gypsum, metal, fibrecement coverings. After treatment with Pulicol 2000 wash the surface with water and soda then rinse. Technical data: Consistency: gel. Colour: transparent. Flammable: yes. Application temperature range: from +10°C to +35°C. Waiting time before removal: – adhesives in water dispersion or in solution: 5 minutes; – reactive adhesives: 60 minutes. Storage: 24 months. Application: by brush. Consumption 0.3 kg/m2. Packaging 3 and 1 kg drums. Cleaning solution for pre-finished parquet. Where to use: Removal of traces of single component, polyurethane adhesive, epoxy adhesive and two-component, epoxy-polyurethane adhesive. Technical data: Consistency: liquid. Colour: transparent. Flammable: yes. Application temperature range: from +5°C to +35°C. Drying time

Pagina 62-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza hesives and...

Pagina 63 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza : ...

: 24 hours. Storage: 12 months. Application: with a cotton rag. Consumption 5-20 g/m2. Packaging multi-pack of 12 1 I (0.85 kg) - bottles. Damp wipes for cleaning hands. Where to use: Removing traces of fresh adhesive and sealant from hands and surfaces. Particularly suitable for removing traces of single component, polyurethane adhesive (such as Ultrabond P990 1K and Ultrabond Eco P992 1K) and two-component epoxy-polyurethane adhesive (such as Ultrabond P902 2K and Lignobond). Cleaner H wipes are a quick, handy item for cleaning hands on site when water is not available. The detergent solution which saturates the wipes contains vitamin E and real aloha that protects hands and leaves a pleasant smell. Packaging plastic tubs containing 80 wipes (20x30 cm). Selection table of Mapei adhesives for the installation of wooden floors 38 Ultrabond P-R9 Adesilex LC/R Ultrabond Eco P992 1K Ultrabond Eco S955 1K Adesilex PA Adesivil D3 Substrates Ultrabond P990 1K Adesilex LC/RP Ultra

Pagina 63-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza : 24 hours....

Pagina 64 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

bond Eco S945 1K Lignobond Ultrabond P997 1K T Ultrabond S965 1K Ultrabond P902 2K Ultrabond P913 2K TYPES OF PARQUET Interiors Mosaic (EN 13488) Solid wood without joints (EN 13227) Solid jointed wood (EN 13226) Assembled control panels (EN 13629) Plywood elements (EN 13489) Laminated and floating Wood skirting Stairs Exteriors KEY These symbols are used to identify MAPEI products which give off a low level of volatile organic compounds (VOC) as certified by GEV (Gemeinschaft Emissionskontrollierte Verlegewerkstoffe, Klebstoffe und Bauprodukte e.V.), an international organisation for controlling the level of emissions from products used for floors. MAPEI recommended Small sized (L < 500 mm) Kerb laying Medium sized For the fixing of elements non perfectly anchored to the substrate N.B. - THIS TABLE IS MERELY INDICATIVE; FOR FURTHER INFORMATION, REFER TO THE TECHNICAL DATA SHEET FOR EACH PRODUCT Ultrabond Eco 575 ADHESIVES FOR WOODEN AND LAMINATE FLOORING 39 Politeama T

Pagina 64-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza bond Eco S945 ...

Pagina 65 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

heatre - Poggibonsi - Italy 40 Water vinyl adhesives ADHESIVES FOR WOODEN AND LAMINATE FLOORING 41 Adesilex LC/R Adesilex LC/RP Adesivil D3 Fast-setting adhesive in water emulsion and with low water content for bonding wooden flooring. Where to use: Bonding of: • wood-back strips and mosaic wooden flooring; • strips, blocks; • small wood strips of all types of wood. Technical data: Consistency: thick paste. Colour: beige and brown. Flammable: no. Application temperature range: from +10°C to +30°C. Open time: approximately 30 minutes. Set to light foot traffic: after 24 hours. Polishing: once completely dry (minimum 10 days). Storage: 24 months. Protect from frost. Application: notched trowel. Consumption 0.8-1.0 kg/m2. Packaging 20 and 12 kg drums. Adhesive in water dispersion and with low water content for bonding wooden flooring. Where to use: Bonding of: • wood-back strips and mosaic wooden flooring; • all types of wooden strips; • small wood strips not very

Pagina 65-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza heatre -...

Pagina 66 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ...

sensitive to moisture. Technical data: Consistency: thick paste. Colour: beige and brown. Flammable: no. Application temperature range: from +10°C to +30°C. Open time: approximately 30 minutes. Set to light foot traffic: after 24 hours. Polishing: once completely dry (minimum 10 days). Storage: 24 months. Protect from frost. Application: notched trowel. Consumption 0.8-1.0 kg/m2. Packaging 20 and 12 kg drums. Solvent-free adhesive for prefinished water resistant floating wooden or laminate flooring. Where to use: Bonding of: • joints between pieces of prefinished wooden flooring; • small wooden pieces; • DIY works. Technical data: Consistency: viscose liquid. Colour: white. Dried film: transparent. Flammable: no. Application temperature range: from +15°C to +35°C. Open time: 5-10 minutes. Set to light foot traffic: after approx. 12 hours. Final hardening: approximately 24 hours. Resistance to water: D3 class/EN 204-205. Storage: 24 months. Protect from frost. Application: e

Pagina 66-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza sensitive to ...

Pagina 67 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

xtrusion from the nozzle of the bottle. Consumption 0.025 kg/m or 0.1-0.2 kg/m2. Packaging 0.5 kg bottles. Adhesives based on resins in alcohol ADHESIVES FOR WOODEN AND LAMINATE FLOORING 43 Adesilex PA Adhesive based on synthetic resins in alcohol for bonding wooden flooring. Where to use: Bonding of: • wood-back strips and mosaic wooden flooring; • all types of wooden strips and blocks; • small sized prefinished wooden flooring. Technical data: Consistency: creamy paste. Colour: beige. Flammable: yes. Application temperature range: from +10°C to +30°C. Open time: approx. 10-20 minutes. Set to light foot traffic: after 24-72 hours. Polishing: at least 72 hours. Storage: 24 months. Application: notched trowel. Consumption 0.6-1.2 kg/m2. Packaging 16 kg drums. 44 Two-component epoxy-polyurethane adhesives ADHESIVES FOR WOODEN AND LAMINATE FLOORING 45 New formula Lignobond Ultrabond P902 2K Ultrabond P913 2K Two-component epoxy-polyurethane adhesive for laying woo

Pagina 67-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza xtrusion from ...

Pagina 68 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

den floors. Where to use: Bonding all types and shape of wooden parquet on any kind of substrate. Recommended for heated screeds. Technical data: Consistency: comp. A: paste; comp. B: paste. Colour: comp. A: beige or brown; comp. B: off-white. Flammable: no. Mixing ratio: comp. A : comp. B = 90 : 10. Pot life of mix: 60-70 minutes. Application temperature range: from +10°C to +30°C. Open time: 1 hour. Set to foot traffic: 24 hours. Sanding: after 3 days. Storage: 24 months. Application: notched trowel. Consumption 800-1000 g/m2. Packaging 10 kg and 5 kg drums (A+B). Two-component epoxy-polyurethane adhesive for wooden flooring. Where to use: Bonding of all types and sizes of wooden flooring on all types of substrate. Suitable for heating screeds. Technical data: Consistency: comp. A: pasty; comp. B: pasty. Colour: comp. A: beige or brown; comp. B: whitish. Flammable: no. Mixture ratio: comp. A : comp. B = 90 : 10. Pot life: 60-70 minutes. Application temperature range: from +10°C t

Pagina 68-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza den floors....

Pagina 69 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza o ...

o +30°C. Open time: 1 hour. Set to light foot traffic: after 24 hours. Polishing: after 3 days. Storage: 24 months. Application: notched trowel. Consumption 1.0-1.5 kg/m2. Packaging 10 kg drums (A+B). Two-component, epoxy-polyurethane adhesive for wooden floors. Where to use: Bonding traditional, medium-sized solid wood floors and for all types of pre-finished floors. Technical data: Consistency: comp. A: paste; comp. B: paste. Colour: comp. A: beige or brown; comp. B: beige. Flammable: no. Mixing ratio: comp. A : comp. B = 90 : 10. Pot life of mix: 60 minutes. Recommended application temperature range: from +10°C to +30°C. Open time: 60 minutes. Set to light foot traffic: after 24 hours. Sanding: after 3 days. Storage: 24 months. Application: notched trowel. Consumption 1.0-1.5 kg/m2. Packaging 10 kg drums (A + B). 46 One-component polyurethane adhesives ADHESIVES FOR WOODEN AND LAMINATE FLOORING 47 Ultrabond P990 1K Ultrabond P997 1K T Ultrabond Eco P992 1K One-componen

Pagina 69-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza o +30°C. Open...

Pagina 70 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza t,...

t, solvent-free, readyto-use flexible polyurethane adhesive with a very low emission level of volatile organic compounds (VOC) for laying parquet. Where to use: Bonding pre-finished and traditional solid wood parquet, pre-assembled tops and all shapes and types of multi-layered elements on any kind of substrate. Also suitable for bonding wooden base-boards. Particularly suitable heated substrates. Odourless and completely free of solvents and free amines, may be used by those subjects allergic to epoxy-polyurethane products. We advise against laying varnished, prefinished solid wood in the lower part or traditional solid parquet without joints. Technical data: Consistency: creamy paste. Colour: beige and brown. Inflammable: no. Application temperature range: from +10°C to +35°C. Open time: 110 minutes. Set to light foot traffic: 12 hours. Sanding: after 3 days. EMICODE classification: EC1 R - very low emission. Storage: 12 months. Application: notched trowel. Consumption 0.8-1.0 kg/m

Pagina 71 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ²...

². Packaging 7 and 15 kg aluminium bags contained in plastic drums. Boxes containing 20x600 cc aluminium tubes. Solvent-free, one-component, ready-to-use, thixotropic polyurethane adhesive for laying wooden steps. Where to use: Laying wooden uprights treads and stairs and wooden mosaic on wall. Also suitable for bonding wooden baseboards and for laying pre-finished, three-layered parquet with beads of adhesive: Technical data: Consistency: thixotropic paste. Colour: ochre. Inflammable: no. Recommended application temperature range: from +10°C to +35°C. Open time: approx. 100 minutes. Set to light foot traffic: after 12 hours. Polishing: after 3 days. Storage: 12 months. Application: by extrusion. Consumption – installing wooden stairs: the yeald is ca. 2 m2 each soft cartridge (diagonal bead with the distance of 5-10 cm); – installing pre-finished parquet with three layers: the yeald is ca. 4/6 m2 each soft cartridge (diagonal bead with the distance of 10-15 cm); – installing

Pagina 71-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ². Packaging ...

Pagina 72 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ...

wood skirtings: the yeald is ca. 15 ml each soft cartridge. Packaging boxes containing 20 aluminium soft cartridges, each one containing 600 c.c. One-component, solvent-free, readyto-use flexible polyurethane adhesive with a very low emission level of volatile organic compounds (VOC) for laying parquet. Where to use: Bonding pre-finished and traditional parquet and solid wood mosaic, pre-assembled tops and all shapes and types of multilayered elements on any kind of substrate. Particularly suitable for heated substrates. Suitable for floor-layers allergic to epoxypolyurethane products. No hazard warning symbols required on the packaging and completely free of solvents or other substances which give off unpleasant smells. Particularly recommended for use in re-building work and in the vicinity of inhabited areas. We advise against laying varnished, prefinished solid wood in the lower part or traditional solid wood parquet without joints. Technical data: Consistency: creamy paste. Colo

Pagina 72-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza wood...

Pagina 73 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

ur: beige. Inflammable: no. Application temperature range: from +10°C to +35°C. Open time: 140 minutes. Set to light foot traffic: 12 hours. Sanding: after 3 days. EMICODE classification: EC1 - very low emission. Storage: 12 months. Application: notched trowel. Consumption 0.8-1.0 kg/m². Packaging 15 kg aluminium bags contained in plastic drums. 48 Ultrabond Eco P909 2K Ultrabond P-R9 Two-component polyurethane adhesive for the installation of wooden floors. Water and solvents-free Ultrabond Eco P909 2K has an extremely low emission level of volatile organic compounds. Where to use: Bonding all varieties and shapes of wooden floors on any type of substrates, recommended for heated screeds. Completely free of solvents and free amines, may be used by installers allergic to epoxypolyurethane products. Consistency: comp. A thick paste; comp. B fluid paste. Colour: beige. Flammable: no. Mixing ratio: comp. A : comp. B = 9 : 1. Pot life of mix: approx. 30 minutes. Application tempera

Pagina 73-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ur: beige....

Pagina 74 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

ture range: from +10°C to +30°C. Open time: 50-60 minutes. Step-on time: 24 hours. Sanding: after 3 days. EMICODE: EC1 R Plus - very low emission. Storage: 12 months. Consumption 0.8-1.3 kg/m². Packaging 5 kg and 10 kg drums (A+B). One-component, hygro-setting, expansive polyurethane adhesive used by injection, for fastening and repairing parquet elements which are not perfectly bonded to the substrate. Where to use: Fastening and repairing parquet elements which are not perfectly bonded to the substrate, by injecting the product into holes drilled in correspondence with the joints between the elements. It may also be used indoors on pre-finished and painted floors, both before and after sanding. Take care when applying the product. Technical data: Consistency: liquid. Colour: brown. Flammable: no. Recommended application temperature range: from +10°C to +35°C. Sanding: after 24 hours. Set to light foot traffic: after 24 hours. Storage: 6 months. Application: by extrusion from th

Pagina 74-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ture range:...

Pagina 75 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza e ...

e tip on the canister. Consumption 1-2 ml injected into each hole. Packaging 0.5 kg canisters. ADHESIVES FOR WOODEN AND LAMINATE FLOORING 49 Mobino Offices - Lucerne - Switzerland 50 Sililated-based adhesives ADHESIVES FOR WOODEN AND LAMINATE FLOORING 51 Ultrabond Eco S945 1K Ultrabond S965 1K Ultrabond Eco S955 1K One-component, isocyanate and solvent-free, sililate polymer adhesive with a low modulus of elasticity and very low emission level of volatile organic compounds (VOC) for bonding pre-finished parquet and mediumsized solid wooden blocks. Where to use: Bonding pre-finished parquet, mediumsized wooden blocks, lamparquet, industrial jointed wooden slats up to 9 cm wide and wooden worktops on all kinds of substrate. Suitable for heated substrates. No hazard symbols on packaging, and does not contain solvents, isocyanites or free amines, so may be used by those subjects allergic to epoxy-polyurethane products. Easy to clean from hands and pre-finished surfaces. Techn

Pagina 75-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza e tip on the...

Pagina 76 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

ical data: Consistency: creamy paste. Colour: beige. Inflammable: no. Application temperature range: from +10°C to +35°C. Open time: 110 minutes. Set to foot traffic: 12 hours. Sanding: after 3 days. EMICODE classification: EC1 R - very low emission. Storage: 12 months. Application: notched trowel. Consumption 0.8-1.2 kg/m². Consumption 0.8-1.2 kg/m². Packaging 15 kg aluminium bags contained in plastic drums. One-component, solvents and iso-cyanates free sililate polymer adhesive with a low modulus of elasticity, long open times and a very low emission level of volatile organic compounds (VOC - GEV EC1 R Plus) for all types of parquet and teak on external surfaces. Where to use: Bonding pre-finished and traditional solid wood parquet, pre-assembled tops and all shapes and types of multi-layered elements on any kind of substrate. Also suitable for laying teak on external surfaces. Suitable for heated substrates. No hazard symbols on packaging, and does not contain solvents, isocyan

Pagina 76-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ical data:...

Pagina 77 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

ites or free amines, so may be used by those subjects allergic to epoxy-polyurethane products. Easy to clean from hands and pre-finished surfaces. Technical data: Consistency: creamy paste. Colour: beige. Inflammable: no. Application temperature range: from +10°C to +35°C. Open time: 110 minutes. Set to foot traffic: 12 hours. Sanding: after 3 days. EMICODE classification: EC1 R Plus - very low emission. Storage: 12 months. Application: notched trowel. Consumption 0.8-1.2 kg/m². Packaging 15 kg aluminium bags contained in plastic drums. One-component, isocyanate and solvent-free, sililated polymer-based adhesive with very low emission of volatile organic compounds (VOC GEV EC1 R Plus), for all types of parquet. Where to use: Bonding pre-finished and traditional solid wood parquet, pre-assembled tops and all shapes and types of multi-layered elements on any kind of substrate. Suitable for heated substrates. No hazard symbols on packaging, and does not contain solvents, isocyanites o

Pagina 77-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza ites or free...

Pagina 78 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza r ...

r free amines, so may be used by those subjects allergic to epoxy-polyurethane products. Easy to clean from hands and pre-finished surfaces. Particularly suitable whenever blocks must be fixed quickly in place. Technical data: Consistency: creamy paste. Colour: beige. Inflammable: no. Recommended application temperature range: from +10°C to +35°C. Open time: 50-60 minutes. Set to light foot traffic: after 12 hours. Sanding: after 3 days. EMICODE: EC1 R Plus - very low emission. Storage: 12 months. Application: notched trowel. Consumption 0.8-1.2 kg/m2. Packaging 15 kg aluminium bags contained in plastic drums. 52 Coloured sealants PAINTS, STUCCOS, OILS, BASE COATS AND COLOURED SEALANTS FOR WOODEN FLOORING 53 Silwood Silwood Decking Acrylic sealant in water dispersion for wooden floors with a very low emission level of volatile organic compounds (VOC). Where to use: Sealing perimeter joints in wooden floors and joints between different types of floors when there is no joint t

Pagina 78-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza r free amines,...

Pagina 79 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

rim. Once dry, Silwood may be sanded down and painted over. It is available in oak, iroko, doussié, wengé, teak, walnut, cherry, beech, maple and birch, and their colours are very similar to the various types of wood most commonly used. Technical data: Consistency: creamy paste. Flammable: no. Application temperature range: from +5°C to +35°C. Open time: 10-20 minutes. Sanding: after 24 hours. After sanding, the product may be painted over. EMICODE: EC1 - very low emission. Storage: 12 months. Application: by extrusion from a tube. Colour white, oak, iroko, doussié, wengé, teak, walnut, cherry, beech, maple and birch. Consumption according to the size of the joint to be filled, calculating that its volume mass is 1.75 g/cm3. Packaging 310 ml tubes. Solvent and isocyanate-free, sililated polymer sealant with a very low emission level of volatile organic compounds (VOC - GEV EC1 R Plus) and low modulus of elasticity, suitable for sealing all types of wooden floors on internal and

Pagina 79-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza rim. Once dry,...

Pagina 80 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

external surfaces. Where to use: Sealing joints in wooden floors on internal and external surfaces and joints between different types of wooden floors. Sealing wooden floors on balconies, terraces, around swimming pools and in environments such as wellness centres and spas. Sealing teak floors bonded on external surfaces with Ultrabond S 965 1K. Once it has completely polymerised, Silwood Decking may be sanded and treated with oil or Ultracoat water-based varnish. Technical data: Consistency: thixotropic paste. Application temperature range: from +5°C to +35°C. Sanding: after 4/5 days. After sanding, the product may be painted over. Skin formation: 15 minutes ± 2 minutes. EMICODE: EC1 R Plus - very low emission. Storage: 12 months. Colour black. Consumption according to the size of the joint. Packaging boxes of 20x600 ml tubes. Water-based and solvent-based stuccos PAINTS, STUCCOS, OILS, BASE COATS AND COLOURED SEALANTS FOR WOODEN FLOORING 55 Ultracoat Acqua Plus Ultracoat LS

Pagina 80-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza external...

Pagina 81 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza

...

Solvent-free, water-based binder with extremely low emission levels of volatile organic compounds (VOC) and no NMP, mixed with sawdust for grouting wooden floors. Suitable for water-based varnishing cycles. Where to use: Grouting and preparing traditional wooden floors, both pre-polished and those requiring repair. Prepare the grout by mixing the product with sawdust given off during sanding (mixing ratio Ultracoat Acqua Plus: sawdust = 3-4 : 1) until a homogenous paste is obtained. Seal the floor by applying the product with Ultracoat Steel Spatula stainless steel, forcing as much mix as possible to penetrate into the cracks. Technical data: Consistency: liquid. Colour: whitish. Inflammable: no. Recommended application temperature range: from +10°C to +35°C. Sanding: after approximately 1 hour. Painting: the surface may be painted over after 3 hours, and within 5 hours, with waterbased varnish. Storage: 12 months. Application: Ultracoat Steel Spatula stainless steel. Consumption 1

Pagina 81-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza

Solvent-free...

Pagina 82 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

00-120 g/m2 per coat. Packaging 5 l cans. Nitro-cellulose based binder in solvents, mixed with sawdust for grouting wooden floors. Also suitable for sealing large cracks. Where to use: Grouting and preparing traditional wooden floors, both pre-polished and those requiring repair. Prepare the grout by mixing the product with sawdust given off during sanding (mixing ratio Ultracoat LS: sawdust = 3-5 : 1) until a homogenous paste is obtained. Seal the floor by applying the product with Ultracoat Steel Spatula stainless steel, forcing as much mix as possible to penetrate into the cracks. Technical data: Consistency: liquid. Colour: brown. Inflammable: yes. Recommended application temperature range: from +10°C to +35°C. Sanding: after approximately 30 minutes. Painting: after 30 minutes. Storage: 12 months. Application: Ultracoat Steel Spatula stainless steel. Consumption 100-120 g/m2 per coat. Packaging 10 kg drums. 56 Water-based base coats PAINTS, STUCCOS, OILS, BASE COATS AND CO

Pagina 82-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza 00-120 g/m2...

Pagina 83 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza...

LOURED SEALANTS FOR WOODEN FLOORING 57 Ultracoat P920 2K Ultracoat P920 S-T Ultracoat Universal Base Two-component water-based base coat, with very low emission of volatile organic compounds (VOC) and no NMP, for wooden floors. Where to use: Preparation of traditional wooden floors, both pre-polished and those requiring repair. Two-component, water-based base product characterised by its high insulating properties. Easy to sand down and easy to apply. Reduces the problem of overlaps. Ultracoat P920 2K has been developed to stain wood without causing unsightly colour variations on wood rich in tannin and other water-soluble colorants (such as oak, teak, etc.). Therefore, it is particularly suitable for more difficult types of wood to avoid them becoming darker or redder. Ultracoat P920 2K contains a high level of residual solids, and when used in combination with Ultracoat P915, one-component water-based paint and Ultracoat P925 two-component, water-based paint, it may be applied i

Pagina 83-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza LOURED...

Pagina 84 - Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza n ...

n two coats (medium traffic) and three coats (high/very high traffic). If single component water-based Ultracoat P915 paint is used, we recommend applying the cycle in two or three coats. Technical data: Consistency: comp. A liquid; comp. B liquid. Colour: comp. A transparent; comp. B whitish. Inflammable: no. Recommended application temperature range: from +10°C to +35°C. Pot life of mix: 2 hours. Mixing ratio: comp. A : comp. B = 5:1 (in volume). Maximum permitted dilution ratio (Dir. 2004/42/CEE): 10% with clean water or Ultracoat EL. Recommended at all times at high temperatures. Sanding: after 12 hours. Painting over with no sanding: after 2 hours, and within 5 hours. EMICODE: EC1 R - very low emission. Storage: 12 months. Application: by roller Ultracoat Roller Plus or brush. Consumption 80-100 g/m2 per coat. Packaging 6 l units (A + B). Two-component, water-based base coat, enhancing wood natural beauty and warmth, with very low emission of volatile organic compounds (VOC) an

Pagina 84-Materiale montaj, finisare si intretinere parchet 2011 MAPEI Catalog, brosura Engleza n two coats...

Promovați-vă produsele și serviciile pe SpatiulConstruit.ro!

Furnizor

MAPEI

Materiale montaj, finisare si intretinere parchet 2011 MAPEI