Produse pentru montarea imbracamintilor vinilice, textile si cauciuc pentru pereti si pardoseli MAPEI
C.P. MK 66013001 - (GB) 1/2008
AG. MORE LIGHT/BETA
DISTRIBUTOR
Products Products for the installation of resilient, textile and wood floor and wall coverings resilient,
on ti d lla oo ta w ns nd s i he le a ring r t ti ve fo ex o ts t, t ll c uc en wa od ili d Pr es an f r loor o f
Mapei S.p.A. Via Cafiero, 22 20158 Milan - Italy Tel. +39/02 37673.1 Fax +39/02 37673.214 www.mapei.com mapei@mapei.it
Resilient, textile and wood line
Rubber, linoleum and vinyl are products which have similar performance specifications in common (such as elasticity, flexibility, impermeability, ease of cleaning, insulation against impact noise, resistance to wear and stains, etc) which make them particularly suitable in environments such as hospitals, schools, gymnasiums and industrial facilities and wherever hygiene, functionality, comfort and an attractive finish are required. Because of their special nature and technical characteristics, these materials require specific substrates, products and l
aying systems (binders and mortars for screeds, primers, levelling and smoothing compounds and adhesives) which MAPEI, the leading company in this sector for more than fifty years, is able to offer. Our commitment to the environment Since October 2005, the products in the ECO range, which had already been tested by internationally recognised institutions such as the German TFI (Teppich Forschung Institute) and by the CRI (Carpet and Rug Institute), bear the “EMICODE EC 1 - very low emission level of volatile organic compounds” mark, awarded by GEV (Gemeinschaft Emissionskontrollierte Verlegewerkstoffe, Klebstoffe und Bauprodukte e.V.), an association which controls the emission levels of products for floors, and of which MAPEI is now an ordinary member.
EMICODE®
GEV
Alongside the adhesive range, MAPEI also offers an extremely wide range of admixtures, pre-blended binders and mortars for screeds, primers, insulating materials, consolidators and anti-humidity barriers, as well as
smoothing compounds and auxiliary products for the installation of long-lasting floors and resilient dressing materials.
s nd u po m cotives ng i thi add o mo and S
r g For further information about these products, take a look at rimeidatin s the technical data sheets provided in folder No. 2 and ,p l from MAPEI internet address ww.mapei.com. rials onso arrier e
rs de in , b dedds es n ture-ble cree x mid pr for s Adan rs a ort m
s,
matrials, c ture b ing e is leanng mat nd mo C ti sa sulapound in m co
▼
▼
SELECTION TABLE OF MAPEI PRODUCTS FOR THE PREPARATION OF SCREEDS WITH SPECIAL BINDERS AND PRE-BLENDED MORTARS 4 PREPARATION OF SCREEDS Mapefluid N200 Mapefluid PZ500 Mapecem Mapecem Pronto Topcem Topcem Pronto
6 6 8 8 9 9
SELECTION TABLE OF MAPEI PRODUCTS FOR THE PREPARATION OF SUBSTRATES Pulicol Eporip Eporip Turbo Primer G Eco Prim T Mapeprim 1K Mapeprim SP Prosfas Primer EP Primer MF Eco Prim PU 1K Triblock P Quartz 1.2 Mapelay
SELF-LEVELLING SMOOTHING COMPOUNDS Ult
raplan Ultraplan Eco Ultraplan Maxi Plano 3 Fiberplan Pianodur R Planolit Novoplan 21 Planopur THIXOTROPIC SMOOTHING COMPOUNDS Nivorapid Planipatch Pianocem M Planitex A ADDITIVES Latex Plus Livigum Planicrete
18 19 19 19 20 20 20 21 21
10 12 12 13 13 14 14 14 15 15 16 16 17 17 17
▼
22 23 24 25
▼
▼
▼
26 27 27
or s fg e sivorin e dhftflo A o s
e r th fo ts ation ing r uc l od stals floo Pr in rt o sp of
▼ ▼
SELECTION TABLE OF MAPEI PRODUCTS FOR THE INSTALLATION OF SOFTFLOORING 36 ECO ADHESIVES Ultrabond Eco 350 Ultrabond Eco V4 SP Ultrabond Eco VS90 Mapecryl Eco Ultrabond Eco 540 Aquacol T Ultrabond Eco 185 ADHESIVES IN WATER EMULSION Rollcoll Adesilex V4
forg es in sivloor he f Ad tile tex
▼
▼
42 42
SELECTION TABLE OF MAPEI PRODUCTS FOR THE INSTALLATION OF TEXTILE FLOORING 28 ECO ADHESIVES Ultrabond Eco 185 Aquacol T Mapecryl Eco Ultrabond Eco Fix ADHESIVES IN WATER EMULSION Rollcoll
38 38 39 40 40 41 41
▼
SELECTION TABLE OF MAPEI PRODUCTS FOR THE INS
TALLATION OF SPORTS FLOORING 50 PRODUCTS FOR THE INSTALLATION OF PVC AND RUBBER Adesilex G19 Adesilex G20 Adesilex UP71 Mapelay Ultrabond Eco V4 SP PRODUCTS FOR THE INSTALLATION OF SYNTHETIC GRASS Ultrabond Turf EP 2K Ultrabond Turf PU 1K Ultrabond Turf PU 2K Ultrabond Turf Tape 100
▼
▼
30 31 31 31
ADHESIVES BASED ON RESINS IN ALCOHOL Adesilex F57 43 CONTACT POLYCHLOROPRENE AND ELASTOMERIC ADHESIVES Ultrabond Aqua-Contact Ultrabond Aqua-Contact Cork Adesilex LP Adesilex VZ
52 52 53 53 53
▼
▼
▼
32
▼
44 44 45 45
▼
ADHESIVES BASED ON RESINS IN ALCOHOL Adesilex F57 34 CONTACT POLYCHLOROPRENE ADHESIVES Adesilex LP Adesilex VZ
54 54 55 55
▼
▼
35 35
TWO-COMPONENT EPOXY-POLYURETHANE, POLYURETHANE AND EPOXY ADHESIVES Adesilex G19 46 Adesilex G20 47 Adesilex UP71 48 Adesilex G12 48 CEMENTITIOUS ADHESIVES Granirapid
▼
49
or s f gs e siv erin e dhl cov A l wa
he r tof fo tstion oring c dualla flo Pro st tive in uc nd co
rs me pri d nd an s a en oring ive o
d o esr wo te fl h Ad fo ina lam
▼ ▼
SELECTION TABLE OF MAPEI PRODUCTS FOR THE INSTALLATION OF WALL COVERINGS 62 ADHESIVES IN WATER EMULSION Adesilex MT32 Adesilex TDV Adesilex VS45 Rollcoll
64 64 65 65
▼ ▼ ▼ ▼ ▼ ▼
ADHESIVES BASED ON RESINS IN ALCOHOL Adesilex F57 66 CONTACT POLYCHLOROPRENE ADHESIVES Ultrabond Aqua-Contact Adesilex VZ Adesilex LP
SELECTION TABLE OF MAPEI PRODUCTS FOR THE PREPARATION OF SUBSTRATES FOR THE INSTALLATION OF WOODEN FLOORING 74 ADDITIVES, PRIMERS AND ADHESION PROMOTERS Primer G 76 Eco Prim T 77 Mapeprim SP 77 Primer KL 78 Primer 3296 78 Livigum 79 Primer PA 79 Prosfas 80 Primer PU60 80 Thinner PU 80 Eco Prim PU 1K 81 Primer MF 82 Primer EP 82 Quartz 1,2 82 Triblock P 83 Eporip 84 Eporip Turbo 84 Pulicol 85 Cleaner L 85 Cleaner H 85 SELECTION TABLE OF MAPEI PRODUCTS FOR THE INSTALLATION OF WOODEN FLOORING 86 WATER VINYL ADHESIVES Adesilex LC/R 88 Adesilex LC/RP 88 Adesilex LC 89 Adesivil D3 89 ADHESIVES BASED ON RESINS IN ALCOHOL Adesile
x PA 90 ONE-COMPONENT POLYURETHANE AND TWO-COMPONENT EPOXY-POLYURETHANE ADHESIVES Lignobond 92 Ultrabond P902 2K 92 Ultrabond P990 1K 94 Ultrabond P997 1K T 95 Ultrabond Eco P992 1K 95 Ultrabond Eco S995 1K 95
▼
SELECTION TABLE OF MAPEI PRODUCTS FOR THE INSTALLATION OF CONDUCTIVE FLOORING 56 CONDUCTIVE PRIMERS Primer G Conductive 58 CONDUCTIVE ADDITIVES Mapelectric CP1 58 ECO ADHESIVES Ultrabond Eco V4 Conductive ADHESIVES IN WATER EMULSION Aquacol T Conductive CONTACT POLYCHLOROPRENE ADHESIVES Adesilex VZ Conductive
▼
▼
67 67 67
▼
58
or s s frofile e siv d p e dh s an A g tin kir s
▼
▼
▼
59
▼
▼ ▼ ▼
60
TWO-COMPONENT EPOXY-POLYURETHANE ADHESIVES Adesilex G19 Conductive 61
SELECTION TABLE OF MAPEI PRODUCTS FOR THE INSTALLATION OF SKIRTINGS AND PROFILES 68 ECO ADHESIVES Ultrabond Eco 575 ADHESIVES IN WATER EMULSION Ultrabond Super Grip ONE-COMPONENT POLYURETHANE ADHESIVES Ultrabond P990 1K Ultrabond P997 1K T CONTACT POLYCHLOROPRENE ADHESIVES Ultrabo
nd Aqua-Contact Adesilex VZ Adesilex LP 70
▼
70
▼
71 71
▼
73 73 73
ALPHABETICAL INDEX OF PRODUCTS
ls oo T
Trowels for adhesives Trowels for levelling compounds Spiked roller Electronic hygrometer Carbide hygrometer Gun for sealants Gun for soft-cartridges
98 98 98 99 99 99 99
s ble ts ta c on rodu ti lec ei p Se ap M of
For the preparation of screeds with special binders and pre-blended mortars 4-5 For the preparation of substrates For the installation of textile flooring For the installation of softflooring 10-11 28-29 36-37
For the installation of sports flooring 50-51 For the installation of conductive flooring 56-57 For the installation of wall coverings For the installation of skirtings and profiles 62-63
Adesilex F57 Adesilex G12 Adesilex G19 Adesilex G19 Conductive Adesilex G20 Adesilex LC Adesilex LC/R Adesilex LC/RP Adesilex LP Adesilex MT32 Adesilex PA Adesilex TDV Adesilex UP71 Adesilex V4 Adesilex VS45 Adesilex VZ Adesilex VZ Conductive Adesivil D3 Aquac
ol T Aquacol T Conductive Carbide hygrometer Cleaner H Cleaner L Eco Prim PU 1K Eco Prim T Electronic hygrometer Eporip Eporip Turbo Fiberplan Granirapid Gun for sealants Gun for soft-cartridges Latex Plus Lignobond Livigum Mapecem Mapecem Pronto Mapecryl Eco Mapefluid N200 Mapefluid PZ500 Mapelay Mapelectric CP1 Mapeprim SP Mapeprim 1K Nivorapid Novoplan 21 Pianocem M Pianodur R
34/43/66 48 46/52 61 47/52 89 88 88 35/45/67/73 64 90 64 48/53 42 65 35/45/67/73 60 89 31/41 59 99 85 85 16/81 14/77 99 12/84 13/84 20 49 99 99 26 92 27/79 8 8 31/40 6 6 17/53 58 14/77 14 22 21 24 20
Planicrete 27 Planipatch 23 Planitex A 25 Plano 3 19 Planolit 20 Planopur 21 Primer 3296 78 Primer EP 15/82 Primer G 13/76 Primer G Conductive 58 Primer KL 78 Primer MF 16/82 Primer PA 79 Primer PU60 80 Prosfas 15/80 Pulicol 12/85 Quartz 1.2 17/82 Rollcoll 32/42/65 Spiked roller 98 Thinner PU 80 Topcem 9 Topcem Pronto 9 Triblock P 17/83 Trowels for adhesives 98 Trowels for levelling compounds 98 Ultrabond Aqua-C
ontact 44/67/73 Ultrabond Aqua-Contact Cork 44 Ultrabond Eco 185 30/41 Ultrabond Eco 350 38 Ultrabond Eco 540 40 Ultrabond Eco 575 70 Ultrabond Eco Fix 31 Ultrabond Eco P992 1K 95 Ultrabond Eco S995 1K 95 Ultrabond Eco V4 Conductive 58 Ultrabond Eco V4 SP 53 Ultrabond Eco VS90 39 Ultrabond P902 2K 92 Ultrabond P990 1K 71/94 Ultrabond P997 1K T 71/95 Ultrabond Super Grip 70 Ultrabond Turf EP 2K 54 Ultrabond Turf PU 1K 54 Ultrabond Turf PU 2K 55 Ultrabond Turf Tape 100 55 Ultraplan 18 Ultraplan Eco 19 Ultraplan Maxi 19
68-69
For the preparation of substrates for the installation of wooden flooring 74-75 For the installation of wooden flooring 86-87
PREPARATION OF THE MIXTURE
To be mixed (1 bag) with 0-8 mm graded aggregate (140-160 kg) and water (10-12 kg) To be mixed (1 bag) only with water (1.7 litres) To be mixed (1 bag) with Gravel 0-8 mm or 0-8 mm graded aggregate (80-100 kg) and water (4-8 kg) To be mixed (1 bag) only with water (2.1-2.3 litres)
TYPE OF SCREED Bonded
Preparati
on of the substrate
Application of slurry bond coat: Planicrete: H2O: Topcem = 1 : 1 : 3 or with Eporip up to 3.5 cm Application of slurry bond coat: Planicrete: H2O: Topcem Pronto = 1 : 1 : 12 or with Eporip up to 3.5 cm Application of slurry bond coat: Planicrete: H2O: Mapecem 1 : 1 : 2 or with Eporip up to 3.5 cm Application of slurry bond coat: Planicrete: H2O: Mapecem Pronto 1 : 1 : 8 or with Eporip up to 3.5 cm
Thickness of the screed
Un-bonded
Preparation of the substrate
Laying of a polyethylene sheet overlapped at least 20 cm on joints, sealed with adhesive tape and rounded along the perimeter. Application along the perimeter and around columns (if any) of compressible material, such as foamed polyester, in thicknesses not lower than 5 mm. From 3.5 to 8 cm (for thicknesses higher than 8 cm, pour a light-weight cementitious mixture over which the polyethylene sheet will be placed. Make the screed at least 3.5 cm thick).
Thickness of the screed
Floating
Minimum thickness of
the screed
At least 4 cm, reinforced with a mesh. The thickness of the screed varies depending on insulating layer compressibility. For more details refer to the MAPEI Technical Service and/or consult the “Installation of Screeds for Laying Floors” Technical Notebook.
Heating
Addition of additive to the mixture Waiting time for the startup cycle Startup cycle
no 4d no 4d no 1d no 1d
Switch on the heating on minimum temperature. Increase the temperature 5°C every day until reaching the temperature when in service. Keep the temperature on the maximum for some days. Decrease the temperature 5°C every day until the screed reaches 15°-18°C.
PERFORMANCES
Waiting time before installing wood and resilients Compressive strength after 28 days (N/mm2)
4d ≥ 30 4d ≥ 30 1d ≥ 45 1d ≥ 60
N.B. - THIS TABLE IS MERELY INDICATIVE; FOR FURTHER INFORMATION, REFER TO THE TECHNICAL DATA SHEET FOR EACH PRODUCT
Topcem opcem
Topcem opcem Pronto Pronto
Mapecem Pronto Pronto
Mapecem
of he
p eed and t r s for of scinder rtars o al bed m eci nd sp ble rep
ble a n tducts tio pro tion lecpei ara ith Se Ma rep s w
S E L E C T I O N TA B L E O F M A P E I PRODUCTS FOR THE P R E PA R AT I O N O F S C R E E D S WITH SPECIAL BINDERS AND P R E - B L E N D E D M O R TA R S
MAPEI BINDER OR PRE-BLENDED MORTAR
5
TOPCEM PRONTO AND MAPECEM PRONTO ARE CE MARKED AND CERTIFIED ACCORDING TO THE EUROPEAN CLASSIFICATION FOR PRE-BLENDED MORTARS FOR SCREEDS EN 13813
The new European Standard for pre-blended mortars for screeds (EN 13813), “Screed material and floor screeds - Screed material - Properties and requirements”, has now become effective. This norm allows to classify the pre-blended mortars on the basis of the nature of the binders employed and on their physical and elasto-mechanical characteristics. In particular, the standard symbols illustrated here below have been adopted for TOPCEM PRONTO and MAPECEM PRONTO pre-blended mortars, to indicate the following: • screeds mad
e using TOPCEM PRONTO, in accordance with the indications contained in the Technical Data Sheet, are class CT (cementitious binder-based), C30 (compressive strength after 28 days equal to at least 30 N/mm2), F6 (flexural strength after 28 days equal to at least 6 N/mm2), A1fl (reaction to fire class). • screeds made using MAPECEM PRONTO, in accordance with the indications contained in the Technical Data Sheet, are class CT (cementitious binder-based), C60 (compressive strength after 28 days equal to at least 60 N/mm2), F10 (flexural strength after 28 days equal to at least 10 N/mm2), A1fl (reaction to fire class). As with adhesives used for ceramic tiles, according to the European Directive 89/106 for products used in construction work, it is also obligatory to apply the CE mark on the packaging of pre-blended mortars for screeds in order to favour free trade within the member states of the European Community. The CE mark on the packaging is a guarantee for the user that the manufact
urer has respected the following directives: • the screed, if made according to the indications contained in the Technical Data Sheet, possesses the mechanical characteristics and belongs to the reaction to fire class indicated by the CE mark; • the manufacturer has issued a signed Declaration of Compliance (EC Declaration) certificate, with which they assume all responsibility regarding declaration of the CE mark; • with reference to the “Directive 89/106”, the manufacturer is obliged to carry out the same controls as indicated for the CE mark regarding adhesives for ceramic tiles.
n tio s ara ed rep cre P s of
id flu 00 e ap N2 M
d lui00 f pe Z5 Ma P
Superplasticiser with pozzolanic effect for high quality and chemical resistant mortar and concrete. Where to use: Mapefluid PZ500 can be used for manufacturing no-slump concrete for screeds by just reducing the w/c ratio therefore reducing the drying time. Mapefluid PZ500 improves all properties of the concrete. In particu
lar, it provides higher mechanical strength, better waterproofing and durability. Mapefluid PZ500 must be added to the dry components of the mix (cement and aggregate) before the batching water. The Mapefluid PZ500 mix is placed and worked like normal concrete. Dosage 20-60 kg per m3 of mixture. Packaging 11 kg bags. Big bags are available on request.
Superplasticiser for concrete. Where to use: Mapefluid N200 can be used for manufacturing no-slump concrete for screeds by just reducing the w/c ratio therefore reducing the drying time. Mapefluid N200 is a brown-coloured liquid admixture with a base of polymers in water solution that disperse cement grains. Add Mapefluid N200 directly to the mixture after all the other ingredients (cement, aggregates, water). Mapefluid N200 can also be diluted into the mixing water beforehand but its superplasticizing action is less effective. Dosage 0.5 to 1.5 l per 100 kg of cement (0.4-1.3 l). Packaging 200 l, 25 and 10 kg drums - 1000 l tanks. Also
available in bulk on request.
EN 934-2 T 3.1-3.2-9
EN 934-2 T 3.1-3.2
ADMIXTURES, SPECIAL BINDERS AND PRE-BLENDED M O RTA R S F O R S C R E E D S
7
8
m ce e ap M
m ce to e ap Pron M
Ready-to-use pre-blended mortar for fast-setting and drying (24 hours) screeds with controlled shrinkage. Where to use: Formation of both floating and bonded screeds on existing and new slabs for the installation of wood, PVC, linoleum, carpeting, rubber or any other type of flooring where fast drying or immediate laying is required. Mapecem Pronto is ready-to-use and must be mixed just with water. Mapecem Pronto is the ideal solution where good quality graded aggregate is hard to find or for job sites such as those in city centres where the logistics involved in mixing conventional binders can be difficult. Bonded screeds and patching (thicknesses less than 3.5 cm) require the application of a Mapecem Pronto and Planicrete anchoring slurry. Floating screeds (thicknesses above 3.5 cm) must be laid
over a polyethylene sheet. Technical data: Mixing ratio: one 25 kg bag of Mapecem Pronto with 2.1-2.3 litres of water. Open time of the mixture: 20-30 minutes. Application temperature range: from +5°C to +35°C. Set to light foot traffic: after 2-3 hours. Waiting time before installation: 24 hours for resilients and wood. Residual moisture after 24 h: less than 2%. Storage: 12 months. Consumption 20-25 kg/m2 per cm of thickness. Packaging 25 kg bags.
Special hydraulic binder for the preparation of rapid setting and drying (24 hours) screeds with controlled shrinkage. Where to use: Formation of floating and bonded screeds on both existing and new slabs for the installation of floors that are moisture sensitive (wood, PVC, linoleum, carpeting, rubber) or any other type of flooring where rapid drying and immediate laying is required. Mapecem must always be mixed with aggregates. Bonded screeds (less than 3.5 cm thick) and patching require the application of a Mapecem and Planicrete anc
horing slurry. For floating screeds (at least 3.5 cm thick) lay a polyethylene sheet beforehand; for thicknesses of 4-5 cm the aggregates must be graded from 0 to 8 mm in diameter. Technical data: Recommended mixture ratio: 350 to 450 kg of Mapecem with 1 m3 of aggregate or Gravel 0/8 mm and with 80-160 kg of water depending on the aggregate moisture. Open time of the mixture at +23°C: 20-30 minutes. Application temperature range: from +5°C to +35°C. Set to light foot traffic: after 2-3 hours. Waiting time before installation: 24 hours for resilients and wood. Residual moisture after 24 h.: less than 2%. Storage: 12 months. Consumption 3.5-4.5 kg/m2 per cm of thickness. Packaging 20 kg bags.
EN 13813
ADMIXTURES, SPECIAL BINDERS AND PRE-BLENDED M O RTA R S F O R S C R E E D S
m ce p To
m ce nto p To Pro
9
Special hydraulic binder for the preparation of normal setting and fast drying (4 days) screeds with controlled shrinkage. Where to use: Formation of both floating and bonded
screeds on existing and new slabs for the installation of wood, PVC, linoleum, rubber, carpeting or any other flooring where fast drying and laying is required. Bonded screeds (less than 3.5 cm thick) and patching require the application of a Topcem and Planicrete anchoring slurry. For floating screeds (at least 3.5 cm thick) lay a polyethylene sheet beforehand; for thicknesses of 4-5 cm the aggregates must be graded from 0 to 8 mm in diameter. Technical data: Recommended mixture ratio: 200 to 250 kg of Topcem with 1 m3 of aggregate (diameter from 0 to 8 mm) and with 120-140 kg of water for dry aggregate. Open time of the mixture: 40 to 60 minutes. Application temperature range: from +5°C to +35°C. Set to light foot traffic: after 12 hours. Waiting time before installation: 4 days for resilients and wood. Residual moisture after 4 days: less than 2%. Storage: 12 months. Consumption 2-2.5 kg/m2 per cm of thickness. Packaging 20 kg bags.
Ready-to-use pre-blended mortar for fast-dryin
g (4 days) normal setting screeds with controlled shrinkage. Where to use: Formation of both floating and bonded screeds on existing and new slabs for the installation of floors that are moisture sensitive (wood, PVC, linoleum, carpeting, rubber etc.) or any other type of flooring where fast drying and laying is required. Topcem Pronto is ready-to-use and must be mixed just with water. Topcem Pronto is the ideal solution where good quality graded aggregate is hard to find or for job sites such as those in city centres where the logistics involved in mixing conventional binders can be difficult. Bonded screeds and patching (thicknesses less than 3.5 cm) require the application of a Topcem Pronto and Planicrete anchoring slurry. Floating screeds (thicknesses above 3.5 cm) must be laid over a polyethylene sheet. Technical data: Mixing ratio: one 25 kg bag of Topcem Pronto with 1.7 l of water. Open time of the mixture: 40-60’. Application temperature range: from +5°C to +35°C. Set to l
ight foot traffic: after 12 hours. Waiting time before installation: 4 days for resilients and wood. Residual moisture after 4 days: less than 2%. Storage: 12 months. Consumption 18-20 kg/m2 per cm of thickness in relation to the degree of compaction. Packaging 25 kg bags.
EN 13813
Eporip Turbo
pe epar ates Ma pr str of the ub s or of f
ble a nt s o cti uctn e l rod tio Se ip a
PRIMERS, INSULATING MATERIALS, CONSOL MATERIALS AND MOISTURE BARRIER
Mapeprim 1K
Primer G Conductive
Mapeprim SP
Repair cracks with
Eco Prim T
Substrates
FLOORS New
Cementitious screeds Mapecem, Mapecem Pronto, Topcem, Topcem Pronto* screeds Concrete structures Anhydrite screeds Heating screeds Asphalt screeds Chipboard or marine plywood Metal surfaces
Existing
Cementitious screeds and concrete floors Terrazzo tiles, palladiana tiles Ceramic tiles, porcelain tiles Natural stone Magnesite surfaces Wood
WALLS
Concrete Cementitious renders Light-weight concrete blocks Gypsum Gypsum board Chipboard Cer
amic Painted walls
STEPS KEY
This symbol is used to identify MAPEI products which give off a low level of volatile organic compounds (VOC) as certified by GEV (Gemeinschaft Emissionskontrollierte Verlegewerkstoffe, Klebstoffe und Bauprodukte e.V.), an international organisation for controlling the level of emissions from products used for floors.
*
Mapecem, Mapecem Pronto, Topcem and Topcem Pronto screeds do not need a consolidating treatment as long as they have been made according to the method suggested on each technical data sheet.
N.B. - THIS TABLE IS MERELY INDICATIVE; FOR FURTHER INFORMATION, REFER TO THE TECHNICAL DATA SHEET FOR EACH PRODUCT
Primer MF
Primer EP
Primer G
or
Prosfas
Eporip
S E L E C T I O N TA B L E O F M A P E I P R O D U C T S F O R T H E P R E PA R AT I O N O F S U B S T R AT E S
11
LIDATING RS
LEVELLING COMPOUNDS Self-levelling Thixotropic
Planolit 1-5 mm Novoplan 21 1-5 mm
Pianocem M 1-5 mm
3-30 mm
3-10 mm
1-20 mm
0-10 mm
0-3 mm
Triblo
ck P
MAPEI recommended MAPEI recommended. Admixing with Livigum or Planicrete is recommended MAPEI recommended. A coat of Primer G mixed 1 : 1 with water is recommended
Must be mixed with Latex Plus Recommended only when a coat of Primer G, Mapeprim SP or Mapeprim 1K is applied beforehand
Planopur
Planipatch + Latex Plus Nivorapid + Latex Plus
1-10 mm
1-10 mm
3-10 mm
Plastimul 3
Pianodur R
Planipatch
Planitex A
Ultraplan Maxi
Silistucco
Eco Prim PU 1K
Nivorapid
Ultraplan Eco
Plano 3
Fiberplan
Ultraplan
8
ls, a eri ing at at g m sul ting nins, in ida d lea er sol an C im n r , co undsriers p s o r ial omp e ba ter c tur l ma is ico l Pu mo
p ori Ep
Two-component epoxy adhesive for cold joints and sealing of cracks in screeds. Solvent-free. Where to use: • Creation of cold joints between fresh and old concrete. • Stiff sealing of damages or cracks in screeds, cement floors, etc. When it is necessary to recreate the monolithic property of the structure, apply E
porip on clean and dry surfaces. The substrate must be clean, dry, free from oil, grease, traces of paint and other loose material. Technical data: Consistency: Part A: fluid paste; Part B fluid paste. Colour: Part A: black; Part B: white. Mixing ratio: Part A : Part B = 3 : 1. Flammability: no. Application temperature range: from +5°C to +30°C. Setting time: 24 hours. Workability: 60 minutes. Open time: 5 hours. Storage: 12 months. Application: by brush, trowel or by pouring. Consumption 0.5-2 kg/m2. Packaging 10 and 2 kg kit.
Solvent gel to remove adhesives and paint. Where to use: • Removal of old natural and synthetic resin based adhesives and paint. • Cleaning old adhesives from marble and ceramic flooring, levelling compounds, ceramic tiles, mosaic, gypsum, metal, fibre-cement coverings. After treatment with Pulicol wash the surface with water and soda then rinse. Technical data: Consistency: gel. Colour: transparent. Flammability: yes. Application temperature range: from
+10°C to +35°C. Waiting time before removal: – adhesives in water dispersion or in solution: 5 minutes; – reactive adhesives: 60 minutes. Storage: 24 months. Application: by brush. Consumption 0.3 kg/m2. Packaging 3 and 1 kg drums.
C L E A N I N G M AT E R I A L S , P R I M E R S , I N S U L AT I N G M AT E R I A L S , C O N S O L I D AT I N G C O M P O U N D S A N D M O I S T U R E B A R R I E R S
rbo u pT ori Ep
13
G er m Pri
Very fast hardening two-component polyester resin. Where to use: • Sealing cracks in screeds. • By adding dry sand, Eporip Turbo can be used to manufacture mortars for small reparations. Eporip Turbo hardens in approximately 20 minutes. Technical data: Consistency: Part A: fluid paste; Part B: fluid paste. Colour: Part A: grey; Part B: white. Mixing ratio: Part A : Part B = 500 : 8. Flammability: yes. Application temperature range: from +5°C to +30°C. Setting time: 20-30 minutes. Workability: 7 minutes. Storage: 12 months. Application: by trowe
l or by pouring. Consumption 1.7 kg per litre of cavity to be filled. Packaging 508 g metal cans (Part A: 500 g; Part B: 8 g). Synthetic resin based primer in water dispersion with very low emission of volatile organic compounds (VOC). Where to use: Treating gypsum or anhydrite surfaces prior to applying cementitious products. Treating cementitious surfaces (cast or precast concrete walls etc.) prior to laying gypsum based plasters. The surfaces to be treated must be clean and porous. Primer G should be diluted with water from 1:1 to 1:3 to protect old porous floors before levelling, to fix the residual dust and to uniform the substrates absorption prior to levelling or bonding. Apply on perfectly dry gypsum or anhydrite surfaces (residual moisture less than 0.5%). The substrate must be dry and clean, free from oil, grease, traces of paint and any loose particles. Technical data: Consistency: liquid. Colour: light blue. Flammability: no. Application temperature range: from +5°C to +40
°C. Drying time: 2 hours, varies according to the dilution and absorbency of the substrate. EMICODE: EC 1 - very low emission. Storage: 24 months. Protect from frost. Application: by roller and brush. Consumption 0.1-0.2 kg/m2 depending on the use. Packaging 25 - 10 - 5 - 1 kg plastic drums.
14
m pri e ap M
SP
m Pri o Ec
T
m pri e ap 1K M
Solvent-free two-component primer. Where to use: Improves the bonding of smoothing and levelling compounds on gypsum and anhydrite, on very flat and compact surfaces such as ceramic tiles and natural stone. Wait until Mapeprim SP becomes transparent before applying levelling compounds. Use Mapeprim SP only on dry surfaces that are not subject to rising damp. The substrate must be dry and clean, free from oil, grease, traces of paint and any other loose particles. Technical data: Consistency: Part A: liquid; Part B: liquid. Colour: Part A: light blue; Part B: white. Flammability: no. Application temperature range: from +5°C to +40°C. Pot life
: approx. 1 hour. Mixing ratio: Part A : Part B = 1 : 1. Waiting time before application of smoothing compound: between 1 and 3 hours depending on the ambient conditions. Maximum time for application of smoothing compound: 24 hours. Storage: 24 months. Application: by brush, roller or flat trowel. Consumption 0.10-0.20 kg/m2. Packaging 4 and 2 kg drums.
Solvent-free acrylic primer with very low emission of volatile organic compounds (VOC) for porous and non porous surfaces. Where to use: All-purpose primer for improving adhesion of levelling compounds on all porous and non-porous surfaces: cement, gypsum, anhydrite, asphalt, wood, terrazzo. The substrate must be dry and clean, free from oil, grease, paint and any loose particles. Technical data: Consistency: liquid. Colour: white. Flammability: no. Application temperature range: from +5°C to +40°C. EMICODE: EC 1 - very low emission. Storage: 24 months. Protect from frost. Application: by roller and brush. Consumption 0.10-0.20 kg/m2
. Packaging 20 and 5 kg drums. Solvent-free one-component primer. Where to use: • To prepare flat, compact and non porous substrates such as ceramic tile and stone material floor and wall coverings before the application of MAPEI smoothing and levelling compounds, • Treatment of poured asphalt, wood, chip-board, PVC and linoleum surfaces. • Protection from moisture for wooden surfaces. Wait until Mapeprim 1K becomes transparent and then apply the smoothing compound. If installation will be carried out after 24 hours of the application of the primer, spread fine sand over the still fresh Mapeprim 1K layer. Use Mapeprim 1K only over dry surfaces and not subject to rising damp. Technical data: Consistency: creamy liquid. Colour: white light blue. Flammability: no. Application temperature range: from +5°C to +35°C. Waiting time before application of smoothing compound: 1-3 hours. Maximum time for application of smoothing compound: 24 hours. Storage: 24 months. Application: by brush
, roller or flat trowel. Consumption 0.10-0.15 kg/m2. Packaging 5 kg drums.
C L E A N I N G M AT E R I A L S , P R I M E R S , I N S U L AT I N G M AT E R I A L S , C O N S O L I D AT I N G C O M P O U N D S A N D MOISTURE BARRIERS
15
P rE e im Pr
fas ros P
Two-component waterproofing and consolidating primer, in solvent solution, for screeds and industrial flooring. Where to use: • Primer for the consolidation of surfaces of dusty or crumbly cementitious screeds, for anhydrite screeds, radiant heated screeds, old terrazzo tiles, gypsum and gypsum board. • Waterproofing damp screeds to isolate residual moisture. • Anti-dust impregnating primer over industrial flooring, garages, raised flooring. If a levelling compound is used after the application of Primer EP, spread dry sand over the just treated surface to create a suitable mechanical key. The substrate must be dry and clean, free of oil, grease, traces of paint and any loose particles. Technical data: Minimum drying time
: 24 hours depending on the porosity of the substrate. Consistency: liquid. Colour: transparent. Flammability: yes. Application temperature range: from +10°C to +40°C. Pot life of the mixture: 4-5 hours. Mixing ratio: Part A : Part B = 1 : 1. Storage: 24 months. Application: by roller, brush or watering can. Consumption 0.5-0.7 kg/m2. Packaging 5+5 kg drums.
Solvent-free silicate based consolidating compound for cementitious substrates. Where to use: Consolidation of cementitious substrates with poor consistency even in depth, hardening cementitious screeds that tend to crumble on the surface. To prevent the formation of an anti-adhesive film, sprinkle dry sand on the surface of the final coat to facilitate bonding of the next treatment. The substrate must be dry and clean, free of oil, grease, paint and any loose particles. Technical data: Drying time: varies according to the absorbency of the substrate. Consistency: liquid. Colour: transparent. Flammability: no. Application temper
ature range: from +5°C to +35°C. Storage: 24 months. Protect from frost. Application: by roller, brush or watering can. Consumption 0.5-0.7 kg/m2. Packaging 25 kg drums.
16
MF er m Pri
rimK P co PU 1 E
Solvent-free two-component epoxy primer to be used as an adhesion promoter for products of the Mapefloor range and to consolidate and waterproof cementitious substrates. Where to use: • Consolidating primer for poor strength cementitious, radiant heated and anhydrite screeds. • Consolidating primer with an anti-dust effect for concrete industrial flooring such as garages, warehouses, industries, etc. and of cementitious surfaces before the installation of raised flooring. • Waterproofer to avoid excess residual rising water in screeds and concrete flooring. If levelling compounds or adhesives will be used after the application of Primer MF, spread Quartz 1.2 or clean dry sand over the just treated surface in order to improve the adhesion of the products to be applied. Techni
cal data: Consistency: liquid. Colour: transparent yellow. Flammability: no. Application temperature range: from +10°C to +35°C. Waiting time before the installation of floors or application of smoothing compounds: 24-48 hours depending on the temperature. Pot life: 90 minutes. Mixing ratio: Part A : Part B = 3 : 1. Storage: 24 months. Application: by roller or brush. Consumption 0.2-0.3 kg/m2, this varies according to the substrate absorption. Packaging 1 kg (A+B) and 6 kg (A+B) units. Single component, solvent-free, moisture curing polyurethane primer with very low emission of volatile organic compounds (VOC), for consolidating and waterproofing cementitious screeds. Where to use: Waterproofing cementitious screeds with a residual moisture content higher than the maximum level recommended for laying resilient floors. Consolidating unstable and/or mechanically weak substrates. Anti-dust treatment for cementitious and anhydrite screeds with a disjointed surface. If smoothing compound
or adhesive is to be spread on the surface after applying Eco Prim PU 1K, Quartz 1.2 or clean, dry sand must be sprinkled on the surface immediately after treatment to improve the bond of successive applications. Technical data: Consistency: liquid. Colour: brown. Flammability: no. Application temperature range: from +5°C to +35°C. Set to light foot traffic: approx. 2-3 hours. Waiting time before the installation of floors or application of smoothing compounds: 12-36 hours. EMICODE: EC1 R - very low emission. Storage: 12 months. Application: by brush or roller. Consumption 0.2-0.4 kg/m2 per coat. Packaging 10 kg drums.
C L E A N I N G M AT E R I A L S , P R I M E R S , I N S U L AT I N G M AT E R I A L S , C O N S O L I D AT I N G C O M P O U N D S A N D M O I S T U R E B A R R I E R S
P ck lo rib T
.2 z1 art Qu
17
y ela p Ma
Three-component, epoxycementitious primer for waterproofing damp substrates, including non-absorbent ones. Where to use: Triblock P is used as a waterpr
oofing system for damp substrates, especially: • old ceramic or terrazzo floors on substrates with excessive residual moiusture; • cementitious substrates with a moiusture content higher than the recommended level for laying wooden or resilient floors. Triblock P is a three-component epoxycementitious system which is diluted with water. It has the capacity of reticulating on even very smooth, damp surfaces and of forming a compact, waterproof layer which is suitable for laying parquet, PVC, linoleum, rubber and cementitious smoothing compounds. The surface must be dry, clean and free of grease, oil, traces of old paintwork and any other coating which may be removed. Technical data: Consistency: component A liquid; component B liquid; component C powder. Colour: component A white; component B white; component C white. Inflammable: no. Recommended application temperature range: from +5°C to +35°C. Waiting time between the first and second coat: 4-6 hours. Waiting time before laying
floors or smoothing compounds: 18 hours. Pot life: 30-40 minutes. Mixing ratio: comp. A : comp. B : comp. C = 12 : 38 : 50. Storage: 24 months. Application: by brush or roller. Consumption 0.5 kg/m2. Packaging 15 kg drums (A+B+C).
Washed and dried siliceous sand with controlled grading to be used to ensure bonding over resins or epoxy primers. Where to use: Can be used in all cases where rough surfaces are absolutely necessary to help the adhesion of smoothing compounds and adhesives over resins or epoxy primers. Technical data: Colour: grey - beige. Grading: 0.7-1.2. Packaging 25 kg bags.
Waterproof and anti-fracture PVC glass fibre reinforced sheet for interior installation of resilient and textile flooring over substrates that are cracked, dirty, moist and subject to rising damp. Where to use: • Installation of resilient or textile flooring over still damp screeds or subject to continuous rising damp. • Installation of rubber flooring in old industrial buildings where the scr
eeds are soaked with oil and existing residuals of dirt that are very difficult to remove. • Installation of resilient or textile flooring on cracked screeds where the cracks cannot be repaired because subject to possible movement. • To temporarily protect all types of new flooring during on-site work. • Temporary installation of rubber or PVC flooring for sports in places where it is necessary to bring the floor to the previous conditions after the sports event. • Installation of resilient or textile flooring for a certain time in order to avoid damaging the underneath marble, wood, rubber, etc. flooring. Technical data: Length: 25 m. Width: 2 m. Thickness: 1.2 mm. Weight: 1.1 kg/m2. Packaging 25 m rolls. Weight of roll 57 kg.
g lling evehin lf-l oot ds Se m un s po com n pla
ltra U
Ultra-fast hardening (12 hours) selflevelling smoothing compound for thicknesses from 1 to 10 mm. Where to use: • Interior levelling of new or existing substrates, as long as they are not subj
ect to rising damp, to make them ready to receive all types of flooring where a high resistance to traffic and loads is required. • Levelling existing flooring as long as they are solid, dry and clean. Ultraplan is applied up to 10 mm thick per coat. The minimum thickness of Ultraplan must be 3 mm when a wooden floor is going to be installed. Technical data: Consistency: fine powder. Colour: pinkish-grey. Pot life: 20-30 minutes. Setting time: 45-60 minutes. Set to light foot traffic: 3 hours. Waiting time before installation: 12 hours. Application temperature range: from +5°C to +30°C. Mixing ratio: 25-26 parts water for 100 parts by weight of Ultraplan. Storage: 12 months. Application: with a flat trowel and a pump. Consumption 1.6 kg/m2 per mm of thickness. Packaging 23 kg bags.
MAGNA STEYR GROUP PLANT - Graz - Vienna Substrate preparation with: NIVORAPID, ULTRAPLAN, PRIMER G. Installation of linoleum with AQUACOL T
lan p o tra Ec Ul
SMOOTHING COMPOUNDS AND ADDITIVES
lanxi
p tra Ma Ul
19
3 no Pla
Ultra-fast hardening (12 hours) self-levelling smoothing compound for thicknesses from 1 to 10 mm, with very low emission of volatile organic compounds (VOC). Where to use: • Interior levelling of new or existing substrates, as long as they are not subject to rising damp, to make them ready to receive all types of flooring where a high resistance to traffic and loads is required. • Levelling existing flooring as long as they are solid, dry and clean. Ultraplan Eco is applied with a trowel or with a pump up to 10 mm thick per coat. The minimum thickness of Ultraplan Eco must be 3 mm when a wooden floor is going to be installed. Technical data: Consistency: fine powder. Colour: pinkish-grey. Pot life: 20-30 minutes. Setting time: 45-60 minutes. Set to light foot traffic: 3 hours. Waiting time before installation: 12 hours. Application temperature range: from +5°C to +30°C. Mixing ratio: 24-25 parts water for 100 parts by weight of Ultraplan Eco. EMICODE: E
C 1 - very low emission. Storage: 12 months. Application: with a flat trowel and a pump. Consumption 1.6 kg/m2 per mm of thickness. Packaging 23 kg bags.
Ultra-fast hardening self-levelling smoothing compound for thicknesses from 3 to 30 mm. Where to use: • Interior levelling of new or existing substrates, as long as they are not subject to rising damp, to make them ready to receive all types of flooring where high mechanical strength is required. • Levelling existing flooring as long as they are solid, dry and clean. Ultraplan Maxi is applied from 3 to 30 mm per coat. Technical data: Consistency: fine powder. Colour: grey. Pot life: 30-40 minutes. Setting time: 60-90 minutes. Set to light foot traffic: approx. 3 hours. Waiting time before laying: 24-72 hours according to thickness and temperature. Application temperature range: from +5°C to +30°C. Mixing ratio: 18-19 parts water for 100 parts by weight of Ultraplan Maxi. Storage: 12 months. Application: with a flat trowel and a
pump. Consumption 1.7 kg/m2 per mm of thickness. Packaging 25 kg bags.
Fast hardening (24-48 hours) selflevelling smoothing compound for thicknesses from 3 to 10 mm, especially suitable for pump applications. Where to use: • Interior levelling of new or existing substrates, as long as they are not subject to rising damp, to make them ready to receive all types of flooring where good resistance to traffic and loads is required. • Levelling existing flooring as long as they are solid, dry and clean. Especially suitable for the preparation of substrates for raised flooring, since it is also easily applied by pump. It is applied from 3 to 10 mm thick. Technical data: Consistency: fine powder. Colour: pinkish-grey. Pot life: approximately 20 min. Setting time: approximately 60-100 min. Set to light foot traffic: 4-6 hours. Waiting time before installation: 24-48 hours. Application temperature range: from +5°C to +35°C. Mixing ratio: 20-22 parts water for 100 parts by weight of Plano
3. Storage: 12 months. Application: trowel, double rubber squeegee and pump. Consumption 1.6 kg/m2 per mm of thickness. Packaging 25 kg bags.
20
lan erp Fib
R ur d no Pia
t oli n Pla
Fibre-reinforced ultra-fast hardening (12-24 hours) self-levelling smoothing compound for thicknesses from 3 to 10 mm. Where to use: Interior smoothing of existing and new wooden flooring, wooden boarding, chipboard panels, ply-wood, that are sufficiently anchored and where a good resistance to loads and traffic is required. Levelling cement, terrazzo, existing ceramic tile and natural stone substrates. Technical data: Consistency: fine powder. Colour: pinkish-grey. Pot life: 20-30 minutes. Setting time: 45-60 minutes. Set to light foot traffic: 3 hours. Waiting time before installation: 12-24 hours. Application temperature range: from +5°C to +30°C. Mixing ratio: 24-26 parts water for 100 parts by weight of Fiberplan. Storage: 12 months. Application: flat trowel. Consumption 1.5 kg/m2 per mm of t
hickness. Packaging 25 kg bags. Ultra-fast setting (12-24 hours) fine grained self-levelling smoothing compound for thicknesses up to 3 mm, suitable for flooring subjected to heavy traffic. Where to use: • Interior levelling of new or existing substrates to make them ready to receive all types of resilient or textile flooring even subject to heavy loads. • Levelling existing flooring in bushammered cement, terrazzo tiles, ceramic tiles and natural stone. Pianodur R is especially fine grained, so it can be used in minimal or virtually zero thickness, although optimal mechanical strength is reached in thicknesses greater than 1 mm. Technical data: Consistency: fine powder. Colour: grey. Pot life: 20 to 30 minutes. Setting time: 50 to 60 minutes. Set to light foot traffic: 3 hours. Waiting time before installation: 12-24 hours. Application temperature range: from +5°C to +35°C. Mixing ratio: 100 parts by weight of Pianodur R with 30 parts water. Storage: 12 months. Application: flat
trowel or double rubber squeegee. Consumption 1.5 kg/m2/mm. Packaging 22 kg bags.
Fast setting (24 hours) self-levelling smoothing compound for thicknesses from 1 to 5 mm. Where to use: • Interior levelling of new or existing substrates to make them ready to receive all types of resilient or textile flooring even subject to heavy loads. • Levelling existing flooring in bushammered cement, terrazzo tiles, ceramic tiles and natural stone. Technical data: Consistency: fine powder. Colour: grey. Pot life: 15-20 minutes. Setting time: 60 minutes. Set to light foot traffic: 4 hours. Waiting time before installation: 24 hours. Application temperature range: from +5°C to +35°C. Mixing ratio: 25 parts water for 100 parts by weight of Planolit. Storage: 12 months. Application: flat trowel or double rubber squeegee. Consumption 1.5 kg/m2 per mm of thickness. Packaging 25 kg bags.
SMOOTHING COMPOUNDS AND ADDITIVES
IBEROTEL in Monte Gordo - Portugal Substrate preparation with: PLANOLIT, P
RIMER G Carpeting and linoleum laid with: AQUACOL T, ULTRABOND ECO V4 SP
r pu o lan P
21
21 n pla o ov N
Two-component, self-levelling, flexible polyurethane smoothing compound suitable for all types of substrate, especially the deformable kind. Where to use: • Smoothing substrates before laying rubber or PVC floor covering with polyurethane or epoxy-polyurethane adhesives, in residential and industrial environments subject to heavy loads. • Smoothing deformable substrates, such as asphalt and castable concrete. • Smoothing and waterproof protection layer of metal, aluminium, chipboard and marine plywood before laying resilient floor coverings. • Smoothing and waterproof protection of substrates sensitive to humidity, such as those in anhydrite and magnesia. Technical data: Consistency: component A: liquid; component B: liquid. Colour: comp. A: beige, comp. B: brown. Flammability: comp. A: no, comp. B: no. Mixing ratio: comp. A : comp. B = 6 : 1. Pot life of mix: 20-25 minut
es. Application temperature range: from +10°C to +30°C. Set to light foot traffic: after approx. 12 hours. Waiting time before laying: approx. 15 hours. Final hardening time: 7 days. Application: rake or smooth, metal trowel. Consumption approx. 1.5 kg/m2 per mm of thickness. Packaging 14 kg kits.
Fast hardening self-levelling smoothing compound for thicknesses from 1 to 5 mm. Where to use: • Interior levelling of new or existing substrates to make them ready to receive resilient or textile flooring in areas where a good resistance to loads and traffic in offices and public areas is required. • Levelling existing flooring in terrazzo tiles, ceramic tiles, natural and magnesium stone. Technical data: Consistency: fine powder. Colour: grey. Pot life: 20-30 minutes. Setting time: 50-70 minutes. Set to light foot traffic: 3-4 hours. Waiting time before installation: 24 hours. Application temperature range: from +5°C to +35°C. Mixing ratio: 25 parts water for 100 parts by weight of
Novoplan 21. Storage: 12 months. Application: flat trowel or double rubber squeegee. Consumption 1.6 kg/m2 per mm of thickness. Packaging 25 kg bags.
pic troing o hix oth s T o m ound s p com
id ap r vo Ni
Ultra-fast setting thixotropic cementitious levelling mortar for horizontal or vertical surfaces for thicknesses from 1 to 20 mm. Where to use: Interior smoothing of all substrates normally used in the building industry as long as they are not subject to moisture and are clean, such as: • concrete slabs and walls, masonry, renders and cementitious screeds, etc.; • also suitable for existing floor and wall ceramic tile, natural stone and terrazzo coverings; • suitable for repairing or levelling steps, edges of pillars, depressions and holes in flooring, walls and ceilings. Especially recommended when the substrates need to be covered within a short time. It is applied from 1 to 20 mm per coat. Technical data: Consistency: fine powder. Colour: grey. Pot life: 15 minutes. Set
ting time: 20 minutes. Set to light foot traffic: approximately 2 hours. Waiting time before installation: 24 hours. Application temperature range: from +5°C to +35°C. Mixing ratio: 20-22 parts in weight of water for 100 parts of Nivorapid. Storage: 12 months. Application: flat trowel. Consumption 1.6 kg/m2 per mm of thickness. Packaging 25 kg bags.
SMOOTHING COMPOUNDS AND ADDITIVES
tch a nip Pla
23
Smoothing, ultra fast setting thixotropic cementitious levelling mortar for horizontal or vertical surfaces (thickness from 0 to 10 mm). Where to use: Interior smoothing of all substrates normally used in the building industry as long as they are not subject to moisture and are clean, such as: • concrete slabs and walls, masonry, renders and cementitious screeds, etc.; • also suitable for existing floor and wall ceramic tile, natural stone and terrazzo coverings. Especially suitable when a very smooth finishing is required and for smoothing-off up to a feather edge. To improve it
s bonding properties, Planipatch can be mixed with Latex Plus. Technical data: Consistency: fine powder. Colour: grey. Pot life: approx. 10 minutes. Setting time: approx. 25 minutes. Set to light foot traffic: approx. 2 hours. Waiting time before installation: 4-6 hours. Application temperature range: from +5°C to +30°C. Mixing ratio: 25-27 parts in weight of water for 100 parts of Planipatch. Storage: 12 months. Application: flat trowel. Consumption 1.5 kg/m2 per mm of thickness. Packaging 25 kg bags.
24
m ce o ian P
M
Thixotropic cementitious levelling compound for horizontal and vertical surfaces from 1 to 5 mm. Where to use: • Internal levelling of new or existing substrates to ready them for receiving covering subject to normal traffic. • Levelling of existing flooring in bushammered cement, terrazzo tile and cement render levelling compounds, light weight concrete, ceramic tile, existing walls. To improve the mechanical strength of Pianocem M, it is recommended to add
1-2 kg of Livigum or Planicrete for each 25 kg bag. Technical data: Consistency: fine powder. Colour: cement grey. Pot life: 4 hours. Setting time: between 4 and 6 hours depending on the thickness. Set to light foot traffic: from 4 to 24 hours, depending of the temperature conditions. Application temperature range: from +5°C to +35°C. Mixing ratio: 100 parts by weight of Pianocem M and 28 parts water. Storage: 12 months. Application: flat trowel. Consumption 1.4 kg/m2 per mm of thickness. Packaging 25 kg bags.
WARNER BROS MULTIPLEX CINEMA - Vicenza - Italy Substrate preparation with: EPORIP, NIVORAPID, PIANOCEM F, TRIBLOCK, ULTRAPLAN, ULTRAPLAN MAXI, PRIMER G Carpeting laid with ADESILEX VZ
SMOOTHING COMPOUNDS AND ADDITIVES
25
A ex nit Pla
Gypsum based adhesive and levelling compound. Where to use: High resistance adhesive and levelling compound for: • installation of gypsum panels for precast partition walls; • fixing rosettes; • levelling gypsum or cement based renders,
on the latter after a previous application of Primer G. Levelling compounds carried out with Planitex A are suitable to receive all types of textile, resilient and wall paper coverings. Planitex A is used only in interiors for thicknesses from 0 up to 10 mm. Technical data: Consistency: powder. Colour: white. Pot life: 40 minutes. Setting time: 70-90 minutes depending on the thickness. Application temperature range: from +5°C to +35°C. Mixing ratio: 52 parts water for 100 parts by weight of Planitex A. Storage: 12 months. Application: flat trowel. Consumption 1.1 kg/m2 per mm of thickness. Packaging 15 kg bags.
s ive dit Ad
s Plu x ate L
Admixture to be mixed with Nivorapid and Planipatch to improve the deformability and adhesion onto difficult surfaces. Where to use: Latex Plus mixed with Nivorapid or Planipatch produces a cementitious levelling compound with such flexibility and high bonding strength to be used in interiors for levelling highly deformable surfaces such as: •
PVC, ceramic tiles, rubber linoleum, strong non-woven; • properly fixed wood plank flooring, chipboard, plywood; • metal substrates. Levelling compounds prepared with Nivorapid and Planipatch mixed with Latex Plus and applied in thicknesses from 3 to 20 mm and from 0 to 10 mm are suitable to receive every type of resilient or textile flooring. Technical data: Consistency: liquid. Colour: white. Flammability: no Pot life: 20 minutes Setting time: 30 minutes. Set to light foot traffic: after 2 hours. Application temperature range: from +5°C to +30°C. Waiting time before bonding: 12-24 hours. Mixing ratio: 8-8.5 kg of Latex Plus per 25 kg bag of Nivorapid. Application: flat trowel. Consumption 0.6 kg/m2 per mm of thickness. Packaging 10 kg drums.
NEW INVIOLATELLA CENTRE - Rome - Italy Substrate preparation: LIVIGUM, ADESIVIL C
SMOOTHING COMPOUNDS AND ADDITIVES
m igu Liv
27
e ret ic an Pl
Additive in water dispersion for cementitious smoothing compounds and mortars. Where to
use: • Additive for improving the mechanical and adhesion strength of cementitious screeds, renders and coatings. • Additive for the preparation of cement based bonding slurries to form bonded screeds, for filling depressions and repairing parts of screeds. • Added to levelling compounds such as Pianocem M, it improves compressive and abrasive strength. • Diluted 1:4 - 1:5 with water, it fixes surface dust of screeds before the installation of wooden flooring with vinyl adhesives. Livigum can be diluted 1:4 - 1:5 with water depending on the type of application. Technical data: Consistency: viscose liquid. Colour: white. Flammability: no. Application temperature range: from +5°C to +35°C. Storage: 12 months. Protect from frost. Consumption depending on dilution. Packaging 25 - 10 - 5 kg drums.
Synthetic rubber latex for improving adhesion and mechanical strength of cementitious mortars. Where to use: • Additive for cementitious smoothing compounds. Additive for improving th
e mechanical and adhesive strength of cementitious mixes for screeds, renders, thin levelling mortars, etc. • Additive for the preparation of cement based slurries to form bonded screeds, for filling depressions and repairing parts of screeds, cementitious floors etc. • Additive for spatterdash to provide adhesion key for renders. Do not use pure Planicrete as a primer or slurry, always mix it with Portland cement, or, when required, with Mapecem or Topcem. Technical data: Consistency: liquid. Colour: greenish white. Flammability: no. Application temperature range: from +5°C to +40°C. Storage: 12 months. Consumption depending on dilution and thickness of the mortar. Packaging 25 - 10 - 5 - 1 kg drums.
l ape stal oring f M e in flo o th e l for texti of
ble a nt o cts cti ele oduion S i pr at
Adesilex F57
Ultrabond Eco 185
Ultrabond Eco Fix
Aquacol T
Mapecryl Eco
TEXTILE FLOOR COVERINGS Non-woven
Normal Latex backed Polypropylene Self-lay tiles
Tufted /Punched (type of b
ack)
Latex Latex foam Polyurethane foam PVC foam Natural jute Action-bac® polypropylene jute Non-woven polyester Self-lay tiles
KEY
This symbol is used to identify MAPEI products which give off a low level of volatile organic compounds (VOC) as certified by GEV (Gemeinschaft Emissionskontrollierte Verlegewerkstoffe, Klebstoffe und Bauprodukte e.V.), an international organisation for controlling the level of emissions from products used for floors.
MAPEI adhesives recommended
N.B. - THIS TABLE IS MERELY INDICATIVE; FOR FURTHER INFORMATION, REFER TO THE TECHNICAL DATA SHEET FOR EACH PRODUCT
Adesilex LP
Rollcoll
Adesilex VZ
S E L E C T I O N TA B L E O F M A P E I P R O D U C T S F O R T H E I N S TA L L AT I O N O F T E X T I L E F L O O R I N G
o Ec ves esi adh
d on 85 rabo 1 Ult Ec
Adhesive in water dispersion with high initial tack and very low emission of volatile organic compounds (VOC) for textile floor and wall coverings. Where to use: Internal bonding of: • normal
, latex or latex-foam back textile floor coverings; • natural jute back or polypropylene (Action Bac®) carpet; • latex and latex-foam back carpets. Technical data: Consistency: creamy paste. Colour: light beige. Flammability: no. Application temperature range: from +15°C to +35°C. Waiting time: from 0 to 10 min. Open time: maximum 30 min. Set to light foot traffic: after 2-3 hours. Ready for use: after 24 hours. EMICODE: EC 1 - very low emission. Storage: 24 months. Protect from frost. Application: notched trowel. Consumption 0.3-0.45 kg/m2. Packaging 16 kg drums.
T ol c ua Aq
ADHESIVES FOR TEXTILE FLOORING
31
rylo c pe Ec Ma
d onFix rab o Ult Ec
Acrylic adhesive in water dispersion with very low emission of volatile organic compounds (VOC) for textile floor coverings. Where to use: Internal bonding onto absorbent substrates of: • latex and latex-foam backed, polyurethane foam, natural or synthetic jute-backed and polypropylene (Action Bac®) or synthetic non-woven back c
arpets; • normal and latex-backed needlepunch. Technical data: Consistency: creamy paste. Colour: light beige. Flammability: no. Application temperature range: from +15°C to +35°C. Waiting time: 0 to 10 min. Open time: max. 30 min. Set to light foot traffic: after 2 hours. Ready for use: after approx. 24 hours. EMICODE: EC 1 - very low emission. Storage: 24 months in original packaging. Protect from frost. Application: notched trowel. Consumption 0.25-0.45 kg/m2. Packaging 25 - 16 - 5 kg drums.
Adhesive in water dispersion with very low emission of volatile organic compounds (VOC) for textile floor and wall coverings. Where to use: Internal bonding of: • normal and latex back needlepunch carpets; • woven carpets; • natural jute, synthetic and synthetic nonwoven back flock carpets, etc; • latex and latex-back, natural jute, polypropylene jute (Action Bac®) and synthetic non-woven back carpets. Technical data: Consistency: creamy paste. Colour: light beige. Flammability: no
. Application temperature range: from +15°C to +35°C. Waiting time: from 0 to 10 min. Open time: 20-30 min. Set to light foot traffic: after approx. 2-3 hours. Ready for use: at least after 24 hours. EMICODE: EC 1 - very low emission. Storage: 24 months. Protect from frost. Application: notched trowel. Consumption 0.30-0.55 kg/m2. Packaging 25 - 12 - 5 kg drums.
Adhesive in water dispersion with permanent tack and very low emission of volatile organic compounds (VOC) for dry-lay floor tiles. Tiles can be removed and replaced several times. Where to use: Internal bonding of: • dry-lay carpet tiles with all types of backing; • venetian carpets. Technical data: Consistency: creamy paste. Colour: light beige. Flammability: no. Application temperature range: from +15°C to +35°C. Waiting time: from 30 min. to 12 hours. Set to light foot traffic: immediately after installation. Ready for use: immediately after installation. EMICODE: EC 1 - very low emission. Storage: 24 months. Prote
ct from frost. Application: roller and notched trowel. Consumption 0.10-0.20 kg/m2. Packaging 10 - 5 kg drums.
CIRCUS - Boncelles - Belgium Substrate preparation with: NIVORAPID, ULTRAPLAN, PRIMER G Carpeting laid with ULTRABOND ECO 185
s in ive ter s he wa n Ad lsio mu e
oll c oll R
Universal acrylic adhesive in water dispersion for textile floor and wall coverings. Where to use: Internal bonding of: • latex and latex-foam backed, polyurethane-foam, natural and synthetic jute-backed, polypropylene (Action Bac®), non-woven polyester-backed carpet; • normal and latex-backed needlepunch. Technical data: Consistency: creamy paste. Colour: light beige. Flammability: no. Application temperature range: from +10°C to +35°C. Waiting time: – applied with a trowel: from 0 to 30 min; – applied with a roller or sprayed: from 0 to 10 min. Open time: – applied with a trowel: max 60 min.; – applied with a roller or sprayed: max 30 min. Set to light foot traffic: after 2 hours. Rea
dy for use: after approx. 24 hours. Storage: 24 months. Protect from frost. Application: notched trowel, roller or spray. Consumption trowel: 0.3-0.4 kg/m2; roller: 0.20-0.40 kg/m2; sprayed: 0.25-0.3 kg/m2. Packaging 25 - 12 - 5 - 1 kg drums.
ADHESIVES FOR TEXTILE FLOORING
33
BOEHRINGER MANNHEIM - Milan - Italy Substrate preparation with: PIANODUR R, PRIMER G Carpeting laid with ROLLCOLL
ADHESIVES FOR TEXTILE FLOORING
ves esi on dh ed A s a ns in b i l rescoho al
7 F5 x ile s de A
Adhesive based on synthetic resins in alcohol for textile floor and wall coverings. Where to use: Internal bonding of: • normal, needlepunch and latex textile floor coverings; • latex and latex-backed, natural jute-backed, polyester non-woven backed punched and tufted carpets. Technical data: Consistency: creamy paste. Colour: beige. Flammability: yes. Application temperature range: from +10°C to +35°C. Waiting time: from 0 to 10 minutes. Open time: 20 minutes. Set to light foot traffic: after
2-3 hours. Ready for use: after approx. 24 hours. Storage: 24 months. Application: notched trowel. Consumption 0.3-0.55 kg/m2 (0.6 kg/m2 for wheeled chairs). Packaging 19 and 9 kg drums.
ADHESIVES FOR TEXTILE FLOORING
act t on ene C r rop ives hlo hes lyc ad po
LP x ile s de A
35
VZ x ile s de A
Double coat polychloroprene adhesive in solvent solution. Where to use: Internal bonding of: • carpet and needlepunch where instant setting and use of the flooring are required. Technical data: Consistency: viscose liquid. Colour: beige. Flammability: yes. Application temperature range: from +10°C to +35°C. Waiting time: 10-20 minutes. Open time: 50 minutes. Set to light foot traffic: immediately. Ready for use: several days depending on the temperature. Storage: 24 months. Application: notched and flat trowel. Consumption 0.2-0.3 kg/m2. Packaging 10 - 5 - 1 kg drums.
Double coat polychloroprene adhesive in solvent solution. Where to use: Internal bonding of: • carpet and needlepun
ch where instant setting is required. Technical data: Consistency: viscose liquid. Colour: beige. Flammability: yes. Application temperature range: from +10°C to +35°C. Waiting time: approximately 10-20 minutes. Open time: 5 hours. Set to light foot traffic: immediately. Ready for use: several days depending on the temperature. Storage: 24 months. Application: notched and flat trowel. Consumption 0.20-0.35 kg/m2. Packaging 10 - 5 - 1 kg drums.
ble a nt s o cti uctn e l rod tio Se i p la
apenstal ilient M of the i f res o for
Ultrabond Eco V4 SP Ultrabond Eco VS90
Ultrabond Eco 350
Ultrabond Eco 540
Ultrabond Eco 185
Mapecryl Eco
Substrates
VINYL FLOOR COVERINGS
Semi-flexible vinyl Homogeneous vinyl Composition vinyl Vinyl on PVC foam Vinyl on polyurethane foam Polyolefin floors
RUBBER FLOOR COVERINGS
Civil with flat-back “Stud relief” with flat-back Oil resistant, etc. Lined Waffle back for cement installation Sport rubber for interiors and exteriors Steps, edges
LINOLE
UM
Natural jute back Synthetic jute back Cork linoleum
CORK
Natural cork PVC-backed cork Painted cork
COCO
Natural Latex-primed back
KEY
This symbol is used to identify MAPEI products which give off a low level of volatile organic compounds (VOC) as certified by GEV (Gemeinschaft Emissionskontrollierte Verlegewerkstoffe, Klebstoffe und Bauprodukte e.V.), an international organisation for controlling the level of emissions from products used for floors.
MAPEI adhesives recommended
N.B. - THIS TABLE IS MERELY INDICATIVE; FOR FURTHER INFORMATION, REFER TO THE TECHNICAL DATA SHEET FOR EACH PRODUCT
Rollcoll
Adesilex V4
Aquacol T
Adesilex F57 Ultrabond Aqua-Contact
Ultrabond Aqua-Contact Cork
Adesilex LP
Adesilex VZ Adesilex G19 Adesilex G20 Adesilex UP71 Adesilex G12
Granirapid
S E L E C T I O N TA B L E O F M A P E I P R O D U C T S F O R T H E I N S TA L L AT I O N O F S O F T F L O O R I N G
37
o Ec ves esi adh
d on 50 b traco 3 Ul E
d on SP b tra V4 Ul co E
VI
RO
N
M
ENTAL C O
M
M
OUR E N
ITM
ENT
Adhesive in water dispersion with very high bonding strength even after an extended open time and with very low emission of volatile organic compounds (VOC) for resilient floor coverings. Where to use: Internal bonding of: • homogeneous and composition vinyl floor coverings in sheets or in tiles; • semi-flexible vinyl tiles; • smooth or textured rubber flooring with smooth back for light interior traffic only; • polyolefin-based floor coverings; • vinyl flooring on foamed PVC or polyurethane; • synthetic-jute backed linoleum; • natural cork and with PVC support; • natural coconut and with latex back. Technical data: Consistency: creamy paste. Colour: light beige. Flammability: no. Application temperature range: from +15°C to +35°C. Waiting time: from 10 to 20 minutes (30-40 minutes on non-absorbent substrates). Open time: maximum 60 minutes. Set to light foot traffic: after 24 hours. Ready for use: after 72 hours. EMICODE: EC 1 - v
ery low emission. Storage: 24 months. Protect from frost. Application: notched trowel. Consumption 0.25-0.35 kg/m2. Packaging 16 kg drums.
TM
Universal adhesive in water dispersion with extended open time and very low emission of volatile organic compounds (VOC) for resilient flooring. Where to use: Internal bonding of: • homogeneous and composition vinyl floor coverings in sheets or in tiles; • polyolefin-based flooring; • PVC foam floor coverings (cushion-floor); • semi-flexible vinyl tiles; • vinyl flooring on foamed PVC or polyurethane; • smooth or textured rubber flooring with smooth back for light interior traffic only; • synthetic-jute backed linoleum; • natural cork and with PVC support; • natural coconut and with latex back. Technical data: Consistency: creamy paste. Colour: light beige. Flammability: no. Application temperature range: from +15°C to +35°C. Waiting time: approximately 10-20 minutes (30-40 minutes on nonabsorbent substrates). Open time: 40-
45 minutes. Set to light foot traffic: after 24 hours. Ready for use: after 72 hours. EMICODE: EC 1 - very low emission. Storage: 24 months. Protect from frost. Application: notched trowel. Consumption 0.25-0.4 kg/m2 Packaging 16 - 8 kg drums.
ADHESIVES FOR SOFTFLOORING
SAN MARTINO REST HOME - Bollate - Italy Substrate preparation with: NIVORAPID, LIVIGUM, PIANOCEM F, ULTRAPLAN ECO, PRIMER G. Rubber laid with ULTRABOND ECO V4 SP
39
d on 90 b tra VS Ul co E
Multi-purpose, acrylic adhesive in water dispersion with a very low emission level of volatile organic compounds (VOC), for bonding vinyl and rubber floor coverings. Where to use: Internal bonding of: • homogeneous and heterogeneous vinyl floors in sheets or tiles; • semi-rigid vinyl and PVC floor tiles; • rubber tiles or rolls (whatever the type of backing material). Technical data: Consistency: creamy paste. Colour: light beige. Inflammable: no. Application temperature range: from +15°C to +35°C. Waiting time: 10-20 mi
nutes. Open time: 30-40 minutes. Set to light foot traffic: after 6-8 hours. Ready for use: 48-72 hours. EMICODE: EC1 - very low emission. Storage: 24 months. Protect from frost. Application: notched trowel. Consumption 0.25-0.40 kg/m2. Packaging 16 kg drums.
40
rylo c pe Ec Ma
d on 40 b traco 5 Ul E
Acrylic adhesive in water dispersion with very low emission of volatile organic compounds (VOC) for textile floor coverings. Where to use: Internal bonding onto absorbent substrates of: • homogeneous and composition vinyl floor coverings in sheet or in tiles; • semi-flexible vinyl flooring; • vinyl flooring on foamed polyurethane; • cork flooring with PVC support; • natural coconut and with latex-back flooring. Technical data: Consistency: creamy paste. Colour: light beige. Flammability: no. Application temperature range: from +15°C to +35°C. Waiting time: 0 to 10 min. Open time: max. 30 min. Set to light foot traffic: after 2 hours. Ready for use: after approx. 24 hours.
EMICODE: EC 1 - very low emission. Storage: 24 months in original packaging. Protect from frost. Application: notched trowel. Consumption 0.25-0.45 kg/m2. Packaging 25 - 16 - 5 kg drums. Adhesive in water dispersion with very low emission of volatile organic compounds (VOC) specifically formulated for installing linoleum flooring. Where to use: Internal bonding of: • natural-jute back linoleum flooring; • cork linoleum, natural cork, natural coconut and latex-back. Technical data: Consistency: creamy paste. Colour: light beige. Flammability: no. Application temperature range: from +15°C to +35°C. Waiting time: from 0 to 10 minutes. Open time: 15 to 20 minutes. Set to light foot traffic: approximately 3 hours. Ready for use: after 24 hours. EMICODE: EC 1 - very low emission. Storage: 24 months. Protect from frost. Application: notched trowel. Consumption 0.3-0.5 kg/m2. Packaging 16 kg drums.
ADHESIVES FOR SOFTFLOORING
41
T ol c ua Aq
d on 85 b traco 1 Ul E
Adhesive in water
dispersion with very low emission of volatile organic compounds (VOC) for textile floor and wall coverings. Where to use: Internal bonding of: • synthetic jute-back linoleum flooring; • linoleum-cork sheet flooring; • latex-back coconut flooring; • textile wall coverings such as needlepunch, needlepunch on foam, latex needlepunch, wall carpets. Technical data: Consistency: creamy paste. Colour: light beige. Flammability: no. Application temperature range: from +10°C to +35°C. Waiting time: from 0 to 10 minutes. Open time: 20-30 minutes. Set to light foot traffic: after approx. 2-3 hours. Ready for use: at least after 24 hours. EMICODE: EC 1 - very low emission. Storage: 24 months. Protect from frost. Application: notched trowel. Consumption 0.3-0.55 kg/m2. Packaging 25 - 12 - 5 kg drums. Adhesive in water dispersion with high initial tack and very low emission of volatile organic compounds (VOC) for coconut flooring. Where to use: Internal bonding of: • natural coconut or l
atex-back floor coverings. Technical data: Consistency: creamy paste. Colour: light beige. Flammability: no. Application temperature range: from +15°C to +35°C. Waiting time: from 0 to 10 minutes. Open time: maximum 30 minutes. Set to light foot traffic: after 2-3 hours. Ready for use: after 24 hours. EMICODE: EC 1 - very low emission. Storage: 24 months. Protect from frost. Application: notched trowel. Consumption 0.30-0.45 kg/m2. Packaging 16 kg drums.
ADHESIVES FOR SOFTFLOORING
s in e siv ater e dh w ion A uls em
oll c oll R
4 xV e sil e Ad
Universal acrylic adhesive in water dispersion for resilient flooring. Where to use: Internal bonding of: • homogeneous and composition PVC floor tiles and sheet; • vinyl flooring on foam PVC or polyurethane; • semi-flexible vinyl tiles; • synthetic jute-back linoleum; • PVC-backed natural cork; • latex-primed back natural coconut-fibre. Technical data: Consistency: creamy paste. Colour: white. Flammability: no. Application te
mperature range: from +15°C to +35°C. Waiting time: from 0 to 10 minutes. Open time: max 30 minutes. Set to light foot traffic: after approx. 2-4 hours. Ready for use: after 24-48 hours. Storage: 24 months. Protect from frost. Application: notched trowel. Consumption 0.30-0.35 kg/m2. Packaging 25 - 12 - 5 - 1 kg drums.
Universal acrylic adhesive in water dispersion for vinyl floor and wall coverings. Where to use: Internal bonding of: • homogeneous and composition PVC flooring; • semi-flexible vinyl flooring and on foam polyurethane; • natural cork and PVC-backed flooring; • latex-primed back natural coconut-fibre flooring. Technical data: Consistency: creamy paste. Colour: light beige. Flammability: no. Application temperature range: from +15°C to +35°C. Waiting time: – applied with a trowel: from 0 to 30 min; – applied with a roller or sprayed: from 0 to 10 min. Open time: – applied with a trowel: max 60 min.; – applied with a roller or sprayed: max 30 min. Set t
o light foot traffic: after 2 hours. Ready for use: after approx. 24 hours. Storage: 24 months. Protect from frost. Application: trowel, roller or spray. Consumption trowel: 0.3-0.4 kg/m2; roller: 0.20-0.40 kg/m2; sprayed: 0.25-0.3 kg/m2. Packaging 25 - 12 - 5 - 1 kg drums.
ADHESIVES FOR SOFTFLOORING
ves esised dh ba A ins reshol on lco a in
43
7 F5 x ile s de A
Adhesive based on synthetic resins in alcohol for textile floor and wall coverings. Where to use: Internal bonding of: • natural jute-back linoleum flooring; • linoleum-cork and natural cork flooring; • natural coconut-fibre flooring. Technical data: Consistency: creamy paste. Colour: beige. Flammability: yes. Application temperature range: from +10°C to +35°C. Waiting time: from 0 to 10 minutes. Open time: 20 minutes. Set to light foot traffic: after 2-3 hours. Ready for use: after approx. 24 hours. Storage: 24 months. Application: notched trowel. Consumption 0.3-0.55 kg/m2 (0.6 kg/m2 for wheeled chairs). Packagi
ng 19 and 9 kg drums.
act t on ene C r rop eric hlo tom es c oly elas esiv p nd adh t d a on tac
b n ltra -Co U ua Aq
k d on t Cor b ltra tac U on -C ua Aq
Elastomeric, solvent-free, double-coat adhesive in water dispersion for laying floors and walls in natural cork where an immediate bond is required. Where to use: For bonding internal floors and walls in natural and pre-painted cork. Solvent-free double coat elastomer adhesive in water dispersion for the installation of floor and wall coverings, where instant bonding is required. Where to use: Internal bonding of: • Vinyl, rubber, linoleum and cork (PVC-backed or painted) floor and wall coverings on non-absorbent or uneven surfaces; • PVC and rubber steps, skirtings and angles. Technical data: Consistency: creamy paste. Colour: white. Flammability: no. Application temperature range: from +10°C to +35°C. Waiting time: 30-60 minutes. Set to light foot traffic: immediately. Ready for use: several days depending on the tempera
ture. Storage: 24 months. Protect from frost. Application: notched and flat trowel and brush. Consumption 0.3-0.4 kg/m2. Packaging 5 - 10 kg drums. Technical data: Consistency: creamy paste. Colour: white. Flammability: no. Application temperature range: from +10°C to +35°C. Waiting time: 50-60 minutes. Open time: 3 hours. Set to light foot traffic: immediately. Ready for use: immediately. EMICODE: EC1 - very low emission. Storage: 12 months (protect from frost). Application: notched and flat trowel and brush. Consumption 0.15-0.25 kg/m2. Packaging 5 kg drums.
ADHESIVES FOR SOFTFLOORING
P xL e sil e Ad
45
VZ x ile s de A
Double coat polychloroprene adhesive in solvent solution for vinyl and rubber floor and wall coverings. Where to use: Internal bonding of: • rubber, PVC, linoleum and cork floor and wall coverings where instant bonding is required; • rubber and PVC skirtings, baseboards and profiles. Technical data: Consistency: viscose liquid. Colour: beige. Flammability:
yes. Application temperature range: from +10°C to +35°C. Waiting time: approximately 10-20 minutes. Open time: 5 hours. Set to light foot traffic: immediately. Ready for use: several days depending on the temperature. Storage: 24 months. Application: notched and flat trowel. Consumption 0.2-0.35 kg/m2. Packaging 10 - 5 - 1 kg drums.
Double coat polychloroprene adhesive in solvent solution for the installation of floor and wall coverings where instant bonding is required. Where to use: Bonding of: • PVC on curved surfaces; • PVC floor and wall coverings where instant bonding is required or on non absorbent surfaces; • PVC backed wood or cork floor and wall coverings; • linoleum and rubber flooring. Technical data: Consistency: viscose liquid. Colour: beige. Flammability: yes. Application temperature range: from +10°C to +35°C. Waiting time: 10-20 minutes. Open time: 50 minutes. Set to light foot traffic: immediately. Ready for use: several days depending on the temperature.
Storage: 24 months. Application: notched and flat trowel. Consumption 0.2-0.3 kg/m2. Packaging 10 - 5 - 1 kg drums.
t en n po ane, com th nd o- ure a Tw oly ane es v p xy- ureth hesi o ep poly y ad 9 ox G1 ep
x ile s de A
Two-component epoxy-polyurethane adhesive for rubber or PVC flooring. Where to use: Bonding of: • tile or sheet rubber flooring (with flat-back or canvas imprint or stalk back) for interiors and exteriors, subject to heavy and intense traffic; • rubber flooring for athletic complexes (e.g. tracks); • homogeneous and composition PVC flooring and PVC foam-backed; • semi-flexible vinyl flooring; • rubber and PVC flooring on old existing flooring. Technical data: Consistency: Part A: thick paste; Part B: fluid liquid. Colour: Part A: beige, red, green, black; Part B: straw yellow. Flammability: Part A: no; Part B: no. Mixture ratio: Part A : Part B = 94 : 6. Pot life: 50-60 minutes. Application temperature range: from +10°C to + 30°C. Open time: 1 hour. Se
tting time: 9 hours. Set to light foot traffic: after 12-24 hours. Ready for use: after 3 days at +23°C. Storage: 24 months. Application: notched trowel. Consumption 0.4-1.0 kg/m2. Packaging 10 - 5 and 2 kg drums.
ADHESIVES FOR SOFTFLOORING
PALERMO UNDERGROUND STATION - Italy Substrate preparation with: MAPECEM. Tile rubber installation with ADESILEX G19
47
0 G2 x ile s de A
Low viscosity two-component epoxypolyurethane adhesive. Where to use: Bonding of: • thin rubber flooring; • homogeneus, composition and semiflexible PVC flooring. Technical data: Consistency: Part A: thick paste; Part B: fluid liquid. Colour: Part A: beige; Part B: transparent. Flammability: no. Mixture ratio: Part A : Part B = 94 : 6. Pot life: 40-50 minutes. Application temperature range: from +10°C to +30°C. Open time: 1 hour. Setting time: 10 hours. Set to light foot traffic: after 12-24 hours. Ready for use: after 3 days at +23°C. Storage: 24 months. Application: notched trowel and roller. Consum
ption 0.35-0.50 kg/m2 Packaging 10 and 5 kg drums.
LINATE AIRPORT - Milan - Italy PVC installation with ADESILEX G19
48
1 P7 U ex il es Ad
FRANCISCO SA CARNEIRO AIRPORT - Porto - Portugal Substrate preparation with: ULTRAPLAN ECO. Rubber laid with: ADESILEX G12
2 G1 x ile s de A
Water and solvent-free twocomponent polyurethane adhesive for bonding rubber and PVC flooring in interiors. Where to use: Internal bonding onto absorbent and nonabsorbent substrates of: • tile or sheet rubber flooring (with any type of back) also for areas subject to heavy and intense traffic; • homogeneous, composition PVC and PVC foam-backed flooring; • semi-flexible vinyl flooring. Technical data: Consistency: Part A: thick paste; Part B: fluid liquid. Colour: – Part A: grey; – Part B: brown. Flammability: no. Mixture ratio: part A : part B = 86 : 14. Pot life: approximately 30 minutes. Application temperature range: from +5°C to +30°C. Open time: 50 to 60 minutes. Setting time: approximat
ely 4 hours. Set to light foot traffic: after 12-24 hours. Ready for use: after 3 days. EMICODE: EC1 R - very low emission. Storage: 12 months. Application: trowel. Consumption 0.35-1 kg/m2. Packaging 10 and 5 kg drums.
Two-component epoxy adhesive for the installation of rubber flooring. Where to use: Bonding of: • tile or sheet rubber flooring (with flat-back or canvas imprint or stalk back) for interiors and exteriors subject to heavy and intense traffic; • oil resistant rubber flooring. Technical data: Consistency: Part A: thick paste; Part B: thick paste. Colour: – Part A: light brown; – Part B: dark brown. Flammability: Part A: no; Part B: yes. Mixture ratio: Part A : Part B = 1 : 1. Pot life: 60-70 minutes. Application temperature range: from +15°C to +30°C. Open time: 1 hour. Setting time: 9-10 hours. Set to light foot traffic: after 12-24 hours. Ready for use: after 3 days. Storage: 24 months. Application: notched trowel. Consumption 0.5-1.4 kg/m2. Packaging 20 kg d
rums (10+10).
ADHESIVES FOR SOFTFLOORING
PIRELLI SKYSCRAPER - Milan - Italy Rubber bonding in the external paving with GRANIRAPID
us o titi ves n mehesi Ce ad
pid a nir a Gr
49
Two-component cement based adhesive system with rapid hydration, suitable for waffle-back for cement installations (thickness of adhesive up to 10 mm). Where to use: Bonding of internal, external and areas subject to heavy traffic of rubber waffleback for cement installation floor coverings (stalk-back or dove-tailed), which have good stability on all traditional substrates as long as they are solid and clean. The installation of waffle-back for cement floor covering must be carried out using the double coat method. Technical data: Consistency: Part A: powder; Part B: thick liquid. Colour: Part A: grey and white; Part B: white. Flammability: no. Mixture ratio: Part A: 25 kg + Part B: 5.5 kg. Pot life: 45 minutes. Application temperature range: from +5°C to +30°C. Open time: 20 minutes. Setting time: 2 h
ours. Set to light foot traffic: 3-4 hours. Ready for use: 24 hours. Available colours: grey and white. Storage: 12 months. Application: notched trowel. Consumption 12-15 kg/m2. Packaging Granirapid white: 28 kg kits Part A: 22.5 kg bags; Part B: 5.5 kg drum. Granirapid grey: 30.5 kg kits Part A: 25 kg bag; Part B: 5.5 kg drum.
ap nsta oring of M e i s flo r th ort fo sp of
ble a n t ts tio uc lec prod ion Se ei llat
Adesilex UP71
Adesilex G19 Adesilex G20
Ultrabond Turf PU 2K
RUBBER FLOORING
Sports rubber in interiors Sports rubber in exteriors
VINYL FLOORING
Sports vinyl floor in interiors
FLOORING IN SYNTHETIC GRASS
Synthetic grass
LINOLEUM
Linoleum in interiors
KEY
This symbol is used to identify MAPEI products which give off a low level of volatile organic compounds (VOC) as certified by GEV (Gemeinschaft Emissionskontrollierte Verlegewerkstoffe, Klebstoffe und Bauprodukte e.V.), an international organisation for controlling the level of emissions from products used fo
r floors.
MAPEI adhesives recommended
N.B. - THIS TABLE IS MERELY INDICATIVE; FOR FURTHER INFORMATION, REFER TO THE TECHNICAL DATA SHEET FOR EACH PRODUCT
Ultrabond Turf EP 2K
Ultrabond Turf PU 1K
Ultrabond Eco V4 SP
S E L E C T I O N TA B L E O F M A P E I P R O D U C T S F O R T H E I N S TA L L AT I O N O F S P O RT S F L O O R I N G
51
52
for cts of u od tion r Pr lla be sta d rub n e i an th VC 9 P G1
x ile s de A
0 G2 x ile s de A
Low viscosity two-component epoxypolyurethane adhesive. Where to use: Bonding of: • thin rubber flooring; • homogeneus, composition and semiflexible PVC flooring. Two-component epoxy-polyurethane adhesive. Where to use: Bonding of: • tile or sheet rubber flooring (with flat-back or canvas imprint or stalk back) for interiors and exteriors, subject to heavy and intense traffic; • homogeneous and composition PVC flooring and PVC foam-backed; • semi-flexible vinyl flooring; • rubber and PVC flooring on old existing flooring. N.B.: u
pon request also available in the rapid version for application temperatures lower than +15°C (minimum +5°C). Technical data: Consistency: Part A: thick paste; Part B: fluid liquid. Colour: Part A: beige, red, green, black; Part B: straw yellow. Flammability: Part A: no; Part B: no. Mixture ratio: Part A : Part B = 94 : 6. Pot life: 50-60 minutes. Application temperature range: from +15°C to + 30°C. Open time: 1 hour. Setting time: 9 hours. Set to light foot traffic: after 12-24 hours. Ready for use: after 3 days at +23°C. Storage: 24 months. Application: notched trowel. Consumption 0.4-1.0 kg/m2. Packaging 10 - 5 and 2 kg drums. Technical data: Consistency: Part A: thick paste; Part B: fluid liquid. Colour: Part A: beige; Part B: transparent. Flammability: no. Mixture ratio: Part A : Part B = 94 : 6. Pot life: 40-50 minutes. Application temperature range: from +10°C to +30°C. Open time: 1 hour. Setting time: 10 hours. Set to light foot traffic: after 12-24 hours. Ready for use:
after 3 days at +23°C. Storage: 24 months. Application: notched trowel and roller. Consumption 0.35-0.50 kg/m2 Packaging 10 and 5 kg drums.
SYDNEY OLYMPIC STADIUM - Australia Installation of rubber with ADESILEX G19
P R O D U C T S F O R T H E I N S TA L L AT I O N O F S P O RT S F L O O R I N G
1 P7 U lex i es Ad
lay e ap M
53
d on SP b tra V4 Ul co E
Water and solvent-free twocomponent polyurethane adhesive for bonding rubber and PVC flooring in interiors. Where to use: Internal bonding onto absorbent and nonabsorbent substrates of: • tile or sheet rubber flooring (with any type of back) also for areas subject to heavy and intense traffic; • homogeneous, composition PVC and PVC foam-backed flooring; • semi-flexible vinyl flooring. Technical data: Consistency: part A: thick paste; part B: fluid liquid. Colour: – part A: grey; – part B: brown. Flammability: no. Mixture ratio: Part A : Part B = 86 : 14. Pot life: approximately 30 minutes. Application temperature rang
e: from +5°C to +30°C. Open time: 50 to 60 minutes. Setting time: approximately 4 hours. Set to light foot traffic: after 12-24 hours. Ready for use: after 3 days. EMICODE: EC1 R - very low emission. Storage: 12 months. Application: trowel. Consumption 0.35-1 kg/m2. Packaging 5 kg drums.
Waterproof and anti-fracture PVC glass fibre reinforced sheet for interior installation of resilient and textile flooring over substrates that are cracked, dirty, moist and subject to rising damp. Where to use: • Installation of resilient or textile flooring over still damp screeds or subject to continuous rising damp. • Installation of rubber flooring in old industrial buildings where the screeds are soaked with oil and existing residuals of dirt that are very difficult to remove. • Installation of resilient or textile flooring on cracked screeds where the cracks cannot be repaired because subject to possible movement. • To temporarily protect all types of new flooring during on-site work.
• Temporary installation of rubber or PVC flooring for sports in places where it is necessary to bring the floor to the previous conditions after the sports event. • Installation of resilient or textile flooring for a certain time in order to avoid damaging the underneath marble, wood, rubber, etc. flooring. Technical data: Length: 25 m. Width: 2 m. Thickness: 1.2 mm. Weight: 1.1 kg/m2. Packaging 25 m rolls. Weight of roll 57 kg. Universal adhesive in water dispersion with extended open time and very low emission of volatile organic compounds (VOC) for resilient flooring. Where to use: Internal bonding of: • homogeneous and composition vinyl floor coverings in sheets or in tiles; • polyolefin-based flooring; • PVC foam floor coverings (cushion-floor); • semi-flexible vinyl tiles; • vinyl flooring on foamed PVC or polyurethane; • smooth or textured rubber flooring with smooth back for light interior traffic only; • synthetic-jute backed linoleum; • natural cork and w
ith PVC support; • natural coconut and with latex back. Technical data: Consistency: creamy paste. Colour: light beige. Flammability: no. Application temperature range: from +15°C to +35°C. Waiting time: approximately 10-20 minutes (30-40 minutes on nonabsorbent substrates). Open time: 40-45 minutes. Set to light foot traffic: after 24 hours. Ready for use: after 72 hours. EMICODE: EC 1 - very low emission. Storage: 24 months. Protect from frost. Application: notched trowel. Consumption 0.25-0.4 kg/m2 Packaging 16 - 8 kg drums.
the for of cts tion s u od talla gras Pr ns c i eti nth sy
d on 1K b traf PU Ul ur T
d on 2K b tra EP Ulurf T
One-component, epoxy-polyurethane adhesive for bonding synthetic grass surfaces. Where to use: Bonding jointing strips between synthetic grass panels. It is particularly recommended for those subjects who are allergic to epoxy or epoxy-polyurethane products. This adhesive is a one-component ready-to-use product and does not require a catalyser. T
herefore, blending errors are avoided and the product may be used several times. It is particularly suitable at low temperatures. Technical data: Consistency: creamy paste. Colour: green. Inflammable: no. Application temperature range: from 0°C to +30°C. Open time: 80-100 minutes. Set to light foot traffic: 12 hours. Storage: 12 months. Application: n° 3 or n° 4 notched trowel. Consumption 0.30-0.40 kg per metre of 40 mm-wide jointing strip (15 kg of product for 40 metres length). Packaging 15 kg drums and 600 ml aluminium soft cartridges.
Two-component epoxy-polyurethane adhesive for bonding synthetic grass surfaces. Where to use: Bonding jointing strips between synthetic grass panels. Technical data: Consistency: component A: paste; component B: paste. Colour: component A: green; comp B: transparent. Inflammable: no. Mixing ratio: component A : component B = 90 : 10. Pot life of mix: 60-70 minutes. Application temperature range: from +5°C to +30°C. Open time: 1 hour. Set to li
ght foot traffic: after 24 hours. Storage: 24 months. Application: n° 3 or n° 4 notched trowel. Consumption 0.4-0.5 kg per metre of 40 mm-wide jointing strip (10 kg of product for 22-25 metres length). Packaging 10 kg drums.
P R O D U C T S F O R T H E I N S TA L L AT I O N O F S P O RT S F L O O R I N G
55
d on 2K b traf PU Ul ur T
MEAZZA STADIUM - Milan - Italy Installation of synthetic grass with ADESILEX G19
Two-component, solvent and waterfree polyurethane adhesive for bonding synthetic grass surfaces. Where to use: Bonding jointing strips between synthetic grass panels. It is particularly recommended for use at low temperatures and for those subjects who are allergic to epoxy or epoxy-polyurethane products. It is particularly suitable for bonding at low temperatures. Technical data: Consistency: component A: thick paste; component B: fluid liquid. Colour: component A: green; comp B: brown. Inflammable: no. Mixing ratio: component A : component B = 86 : 14. Pot life of mix:
30 minutes. Application temperature range: from 0°C to +30°C. Open time: 50-60 minutes. Set to light foot traffic: after 12-24 hours. Storage: 12 months. Application: n° 3 or n° 4 notched trowel. Consumption 0.4-0.5 kg per metre of 40mm-wide jointing strip (10 kg of product for 20-25 metres length). Packaging 10 and 5 kg drums.
urf dT n 0 boe 10 a ltrTap U
Jointing tape for joining panels of synthetic grass and for marking out pitches for various sports activities. Technical data: Thickness: 0.100 mm. Width of roll: 400 mm. Length of roll: 300 m.
ble a n t ucts o cti prod tion ele pei alla e S a t iv
f M e ins ducting o th on r for of c floo
Ultrabond Eco V4 Conductive
Substrates
CONDUCTIVE FLOORS
Conductive linoleum floors Conductive rubber floors Conductive vinyl floors Conductive textile floors (non-woven and textile)
KEY
This symbol is used to identify MAPEI products which give off a low level of volatile organic compounds (VOC) as certified by GEV (Gemeinschaft Emissi
onskontrollierte Verlegewerkstoffe, Klebstoffe und Bauprodukte e.V.), an international organisation for controlling the level of emissions from products used for floors.
MAPEI adhesives recommended
N.B. - THIS TABLE IS MERELY INDICATIVE; FOR FURTHER INFORMATION, REFER TO THE TECHNICAL DATA SHEET FOR EACH PRODUCT
Besides the above mentioned products, the installation of conductive flooring can be carried out with MAPEI products mixed with the conductive additive MAPELECTRIC CP1 in the following amount:
Products
kg of MAPELETRIC CP1
Electrical resistance MOhm
10 kg of Primer G 12 kg of Aquacol T 16 kg of Ultrabond Eco 350 16 kg of Ultrabond Eco V4SP 16 kg of Ultrabond Eco 185 10 kg di Ultrabond Eco Fix
2.5 2.5 3.75 5 3.75 3.75
Aquacol T Conductive
0.005 0.060 0.070 0.005 0.05 0.005
Adesilex VZ Conductive
Adesilex G19 Conductive
S E L E C T I O N TA B L E O F M A P E I P R O D U C T S F O R T H E I N S TA L L AT I O N O F C O N D U C T I V E F L O O R I N G
57
58
e tiv c
du ers on rim C p
G er ctive m Pri ndu Co
e tiv c du ives n Co ddit a
tric 1 c P ele C p Ma
co E s ive s he ad
o Ective d on duc b tra Con Ul V4
Dark coloured solvent-free synthetic resin based conductive primer in water dispersion. Where to use: Treating cement, anhydrite and gypsum surfaces prior to the application of Mapei conductive adhesives for the installation of conductive textile, PVC, rubber and linoleum floor and wall coverings. The surfaces must be clean, absorbent and perfectly dry. Technical data: Consistency: liquid. Colour: black. Flammability: no. Application temperature range: from +5°C to +40°C. Drying time: minimum 2 hour. Electrical resistance: 50,000 ohm. Storage: 24 months. Protect from frost. Application: brush. Consumption 0.10-0.15 kg/m2 Packaging 10 kg drums.
Solvent-free conductive additive to be added to primers, smoothing compounds and adhesives used for the installation of textile, resilient, conductive and static dissipative flooring. Where to use
: Installation of conductive or staticdissipative floors in EPA environments (electrostatic protective area) according to CEI EN 61340-5-1 norms such as: • electronic (and kinds) industries: manufacturing of semi-conductive components, circuits, PC and their assembly, telephone exchanges and mail sorting, radar stations, computer centres, etc.; • surgery rooms, intensive care, tomography, magnetic resonance, analysis labs, etc.; • chemical-pharmaceutical industries: manufacturing of chemical products in the presence of flammable or explosive powder and/or solvents, ammunition and explosive factories, etc; • printing shops with the presence of solvents, battery charging rooms, sterile rooms, raised flooring on all normal absorbent and moisture resistant substrates used in building. Technical data: Consistency: creamy paste. Colour: black. Density: 1.05 kg/dm3. pH: no. Flammability: no. Packaging 2.5 kg drums.
Light coloured acrylic adhesive in water dispersion with very low emi
ssion of volatile organic compounds (VOC) for the installation of conductive flooring. Where to use: Internal bonding of conductive flooring in: • all areas where electrostatic charges may cause fire or disturb electric and electronic equipment (for example: in surgery rooms, chemical laboratories and factories, areas with electronic instruments, computer centres, etc.) such as: – conductive vinyl flooring; – rubber flooring; – conductive non-woven flooring; – conductive carpets. Technical data: Consistency: creamy paste. Colour: light grey. Flammability: no. Application temperature range: from +15°C to +35°C. Waiting time: from 0 to 10 minutes. Open time: 15 minutes. Set to light foot traffic: after 2-4 hours. Ready for use: after approximately 24-48 hours. Electrical resistance: 100,000 ohm. EMICODE: EC 1 - very low emission. Storage: 24 months. Protect from frost. Application: notched trowel. Consumption 0.3-0.4 kg/m2. Packaging 16 kg drums.
P R O D U C T S F O R T H E
I N S TA L L AT I O N OF CONDUCTIVE FLOORING
s in ive ter s he wa n Ad lsio mu e
59
T ol tive c uaduc Aqon C
Conductive solvent-free fast setting synthetic resin adhesive in water dispersion. Where to use: Internal bonding on absorbent substrates of: • conductive carpet and non-woven flooring; • conductive linoleum flooring. Technical data: Consistency: creamy paste. Colour: light grey. Flammability: no. Application temperature range: from +15°C to +35°C. Waiting time: from 0 to 10 minutes. Open time: approx. 20 minutes. Set to light foot traffic: after 3-4 hours. Ready for use: 24-48 hours. Electrical resistance: 50,000 ohm. Storage: 24 months. Protect from frost. Application: notched trowel. Consumption 0.5-0.6 kg/m2. Packaging 12 kg drums.
PRODUCTS FOR THE INSTALLATION OF CONDUCTIVE FLOORING
act t on ene C r rop ives hlo hes c oly ad p
VZve x i ile uct s de ond A C
Double coat polychloroprene adhesive for conductive flooring. Where to use: Bonding of: • conductive
textile flooring; • conductive vinyl flooring; • conductive rubber flooring in surgery rooms, chemical laboratories and factories, areas with electronic equipment, computer centres, etc.; • corners, skirtings in PVC or conductive rubber; • copper strips. Technical data: Consistency: thick liquid. Colour: black. Flammability: yes. Application temperature range: from +10°C to +35°C. Waiting time: maximum 20 minutes. Set to light foot traffic: immediately. Ready for use: several days depending on the temperature. Electrical resistance: 50,000 ohm. Storage: 24 months. Application: notched and flat trowel. Consumption 0.25-0.40 kg/m2. Packaging 10 kg drums.
ELEMASTER COMPANY - Lomagna (Lecco) - Italy Preparation of screed with TOPCEM, EPORIP, ULTRAPLAN and PRIMER G, installation of conductive with ADESILEX G19 CONDUCTIVE and ADESILEX VZ CONDUCTIVE
PRODUCTS FOR THE INSTALLATION OF CONDUCTIVE FLOORING
t en n po oxycom ep ne otha es Tw e yur esiv l po adh
61
19 e G v exucti il
esond Ad C
Two-component epoxy-polyurethane adhesive for conductive rubber and PVC flooring. Where to use: Bonding of conductive flooring in: • all areas where electrostatic charges may cause fire or disturb electric and electronic equipment (for example: in surgery rooms, chemical laboratories and factories, areas with electronic instruments, computer centres, etc.) such as: – conductive rubber; – conductive PVC; – conductive linoleum. Technical data: Consistency: Part A: thick paste; Part B: fluid liquid. Colour: Part A: black; Part B: straw yellow. Flammability: no. Mixture ratio: Part A : Part B = 90 : 10. Pot life: 30-40 minutes. Application temperature range: from +15°C to +30°C. Open time: 50 minutes. Setting time: 5 hours. Set to light foot traffic: 12-24 hours. Ready for use: after 3 days. Electrical resistance: 150,000 ohm. Storage: 24 months. Application: notched trowel. Consumption 0.3-0.45 kg/m2. Packaging 5 kg drums.
pe stall ings Ma in ver of the co l forf w
al o
ble a nt s o cti uctn e l rod tio Se ip a
Adesilex MT32
Adesilex VS45
Ultrabond Aqua-Contact
Adesilex TDV
Adesilex F57
Substrates
WALL COVERINGS Paper backed
Thick wall paper Vinyl paper Flock Textiles on paper Non-woven on paper
Textiles
Natural textiles Vinyl textiles Non-woven Non-woven material on foam or film Textiles on polyester back Glass fibre Wall carpeting
Synthetic resins
PVC foam Homogeneous and composition PVC PVC foam on polyester Polystyrene foam lining
Cork
Natural cork Backed cork
KEY
MAPEI adhesives recommended
N.B. - THIS TABLE IS MERELY INDICATIVE; FOR FURTHER INFORMATION, REFER TO THE TECHNICAL DATA SHEET FOR EACH PRODUCT
Adesilex VZ
Rollcoll
Adesilex LP
S E L E C T I O N TA B L E O F M A P E I P R O D U C T S F O R T H E I N S TA L L AT I O N O F WA L L C O V E R I N G S
63
s ive r s he ate Ad w n in lsio mu e
V TD x ile s de A
2 T3 M ex il es Ad
Ready-to-use adhesive in water dispersion for laying fabric and fibreglass coverings. Wher
e to use: For laying the following materials on internal walls: • fibreglass fabrics, both pre-painted and those to be painted over; • dressing material in non-woven fabric to be painted over. Technical data: Consistency: creamy paste. Colour: white. Flammability: no. Application temperature range: from +10°C to +35°C. Waiting time: 0-10 minutes. Open time: 20 minutes. Waiting time before painting: 24 hours. Storage: 24 months (protect from frost). Application: by roller or serrated trowel. Consumption 0.15-0.25 kg/m2. Packaging 20 - 10 - 5 kg drums.
Adhesive in water dispersion for the installation of wall coverings. Where to use: Internal bonding of: • wall coverings including vinyl wall paper, flocked, woven and non-woven with paper backing; • textiles, vinyl textiles, non-woven material on foam or film, textiles on polyester; • glass cloth textiles; • PVC foam and PVC foam on polyester wall coverings. Technical data: Consistency: creamy paste. Colour: white. Flammabi
lity: no. Application temperature range: from +15°C to +35°C. Waiting time: from 0 to 10 minutes. Open time: maximum 30 minutes. Storage: 24 months. Protect from frost. Application: notched trowel, roller and brush. Consumption 0.15-0.25 kg/m2. Packaging 20 - 10 - 5 - 1 kg drums.
ADHESIVES FOR WALL COVERINGS
65
oll c oll R
5 S4 V ex il es Ad
Universal acrylic adhesive in water dispersion for vinyl and textile wall coverings. Where to use: Internal bonding of: • wall coverings such as non-woven also on foam or film, textiles on polyester, wall carpets; • natural cork and PVC-backed wall coverings. Technical data: Consistency: creamy paste. Colour: light beige. Flammability: no. Application temperature range: from +15°C to +35°C. Waiting time: – applied with a trowel: from 0 to 30 minutes; – applied with a roller or sprayed: from 0 to 10 minutes. Open time: – applied with a trowel: max 60 minutes; – applied with a roller or sprayed: max 30 minutes. Ready for use: af
ter approx. 24 hours. Storage: 24 months. Protect from frost. Application: notched trowel, roller or spray. Consumption trowel: 0.3-0.4 kg/m2; roller: 0.20-0.40 kg/m2; sprayed: 0.25-0.3 kg/m2. Packaging 25 - 12 - 5 - 1 kg drums.
Acrylic adhesive in water dispersion for the installation of PVC wall coverings. Where to use: Internal bonding of: • PVC foam wall coverings; • homogeneous and composition PVC wall coverings; • PVC foam on polyester; • PVC backed cork wall coverings. Technical data: Consistency: creamy paste. Colour: white. Flammability: no. Application temperature range: from +15°C to +35°C. Waiting time: from 0 to 15 minutes. Open time: maximum 30-40 minutes. Storage: 24 months. Protect from frost. Application: notched trowel. Consumption 0.25-0.45 kg/m2. CHAMBER OF COMMERCE in Milan - Italy Wall covering laid with ADESILEX MT32 Packaging 25 - 12 - 5 - 1 kg drums.
s iven s he d o Ad se ns ba resi l o oh 7 alc n F5 i x ile
s de A
chl oly a p
Adhesive based on s
ynthetic resin in alcohol for textile and linoleum wall coverings. Where to use: Internal bonding of: • wall coverings such as non-woven, felt, wall carpets; • natural cork wall coverings. Technical data: Consistency: creamy paste. Colour: beige. Flammability: yes. Application temperature range: from +15°C to +35°C. Waiting time: from 0 to 10 minutes. Open time: 20 minutes. Ready for use: after approx. 24 hours. Storage: 24 months. Application: notched trowel. Consumption 0.3-0.55 kg/m2 (0.6 kg/m2 for wheeled chairs). Packaging 19 and 9 kg drums.
ADHESIVES FOR WALL COVERINGS
act t on ene C r rop ives o es adh
Z xV e sil e Ad
t d on ntac b tra -Co Ul ua Aq
67
LP x ile s de A
Double coat polychloroprene adhesive in solvent solution. Where to use: Bonding of: • PVC on curved surfaces; • PVC floor and wall coverings where instant bonding is required or on non absorbent surfaces; • PVC backed wood or cork floor and wall coverings. Technical data: Consistency: viscose liqu
id. Colour: beige. Flammability: yes. Application temperature range: from +15°C to +35°C. Waiting time: 10-20 minutes. Open time: 50 minutes. Set to light foot traffic: immediately. Ready for use: several days depending on the temperature. Storage: 24 months. Application: notched and flat trowel. Consumption 0.2-0.3 kg/m2. Packaging 10 - 5 - 1 kg drums.
Solvent-free double coat elastomer adhesive in water dispersion for the installation of wall coverings, where instant bonding is required. Where to use: Internal bonding of: • vinyl and rubber wall coverings on non absorbent or uneven surfaces. Technical data: Consistency: creamy paste. Colour: white. Flammability: no. Application temperature range: from +15°C to +35°C. Waiting time: 30-60 minutes. Set to light foot traffic: immediately. Ready for use: several days depending on the temperature. Storage: 24 months. Protect from frost. Application: notched and flat trowel and brush. Consumption 0.3-0.4 kg/m2 Packaging 5 - 10 kg dru
ms.
Double coat polychloroprene adhesive in solvent solution. Where to use: Internal bonding of: • rubber, PVC, linoleum and cork wall coverings where instant bonding is required; • rubber and PVC skirtings, baseboards and profiles. Technical data: Consistency: viscose liquid. Colour: beige. Flammability: yes. Application temperature range: from +15°C to +35°C. Waiting time: approximately 10-20 minutes. Open time: 5 hours. Set to light foot traffic: immediately. Ready for use: several days depending on the temperature. Storage: 24 months. Application: notched and flat trowel. Consumption 0.2-0.35 kg/m2. Packaging 10 - 5 - 1 kg drums.
Ma inst gs a s of the tin file r forof ski pro
ble a n t cts o cti rodu on ele ei p llati S p a nd
Ultrabond Aqua-Contact
Ultrabond P990 1K
Substrates
SKIRTINGS AND PROFILES
Textile and cork Stiff PVC Plastified PVC Wood
KEY
MAPEI adhesives recommended
N.B. - THIS TABLE IS MERELY INDICATIVE; FOR FURTHER INFORMATION, REFER TO THE TECHNICAL D
ATA SHEET FOR EACH PRODUCT
Ultrabond P997 1K T
Adesilex VZ
Ultrabond Super Grip
Ultrabond Eco 575
Adesilex LP
S E L E C T I O N TA B L E O F M A P E I P R O D U C T S F O R T H E I N S TA L L AT I O N O F S K I RT I N G S A N D P R O F I L E S
69
o Ec ves esi dh a
d on 75 b ltraco 5 U E
s ive r s he ate Ad w n in lsio u em
New
d on rip b traer G Ul up S
High performance adhesive in water dispersion with very low emission of volatile organic compounds (VOC) for bonding skirtings. Where to use: Ultrabond Eco 575 can be used for bonding skirtings in stiff PVC, wood, carpet applied on the back of the skirting or directly on the wall. Apply enough on the back of the skirting or directly onto the substrate to allow the adhesive to transfer to both surfaces. Depending on the height of the skirting, apply one or more lines 5 mm in diameter. Technical data: Consistency: creamy paste. Colour: beige. Flammability: no. Application temperature range: from +5°C to +35°C. Open time: a
pproximately 25 minutes. Final handening time: 24 hours. Storage: 24 months. Protect from frost. Application: extrusion from the cartridge. Consumption – 325 ml cartridge: approximately 12 m per line. Packaging 325 ml cartridges.
White, general purpose acrylic adhesive in water dispersion with a high initial blocking capacity. Where to use: aInternal bonding of: • Profiles and skirting boards in wood, meta, rubber and PVC. • Profiles and decorative panels in polystyrene, gypsum, wood and foam polyurethane. • Wood, chipboard, plasterboard, PVC and cork dressing materials. Technical data: Consistency: creamy paste. Colour: white. Inflammable: no. Recommended application temperature range: from +10°C to +35°C. Open time: 10-15 minutes. Complete hardening time: 24-48 hours. Storage: 24 months. Protect from frost. Application: extruded from tube. Consumption 310 tubes: approximately 15 m for each bead. Packaging 310 tubes.
ADHESIVES FOR SKIRTINGS AND PROFILES
t en on ne p omet
ha s e-cyur sive On pol he ad
d on 1K b tra990 Ul P
71
New
d onK T rab 1 Ult997 P
Solvent-free, single component, ready-to-use, thixotropic polyurethane adhesive for laying wooden steps. Where to use: Laying wooden uprights treads and stairs. Also suitable for bonding wooden baseboards and for laying pre-finished, three-layered parquet with beads of adhesive: Technical data: Consistency: thixotropic paste. Colour: ochre. Inflammable: no. Recommended application temperature range: from +10°C to +35°C. Open time: approx. 100 minutes. Step-on time: after 12 hours. Polishing: after 3 days. Storage: 12 months. Application: by extrusion. Consumption – installing wooden stairs: the yeald is ca. 2 m2 each soft cartridge (diagonal bead with the distance of 5-10 cm); – installing pre-finished parquet with three layers: the yeald is ca. 4/6 m2 each soft cartridge (diagonal bead with the distance of 10-15 cm); – installing wood skirtings: the yeald is ca. 15 ml each soft cartridge. Pac
ha s e-cyur sive On pol he ad
d on 1K b tra990 Ul P
71
New
d onK T rab 1 Ult997 P
Solvent-free, single component, ready-to-use, thixotropic polyurethane adhesive for laying wooden steps. Where to use: Laying wooden uprights treads and stairs. Also suitable for bonding wooden baseboards and for laying pre-finished, three-layered parquet with beads of adhesive: Technical data: Consistency: thixotropic paste. Colour: ochre. Inflammable: no. Recommended application temperature range: from +10°C to +35°C. Open time: approx. 100 minutes. Step-on time: after 12 hours. Polishing: after 3 days. Storage: 12 months. Application: by extrusion. Consumption – installing wooden stairs: the yeald is ca. 2 m2 each soft cartridge (diagonal bead with the distance of 5-10 cm); – installing pre-finished parquet with three layers: the yeald is ca. 4/6 m2 each soft cartridge (diagonal bead with the distance of 10-15 cm); – installing wood skirtings: the yeald is ca. 15 ml each soft cartridge. Pac
... ascunde