Profile de dilatatie pentru finisaje pardoseala VEDA Control joints and tile dividers
Control joints for adhesive affixed tiles
Serie 1600
Presentation
Serie 1600 movement control joints are designed to prevent the malfunctions (cracks, de-bonding) that systematically occur when flooring systems are installed in large areas without joints. Those malfunctions have several origins: - Concrete thermal expansion and contraction according to temperature variations
Field of application
Serie 1600 movement control joints are installed in control bays to partition the adhesive affixed tiles not exceeding 30 mm thickness. They are designed to absorb highly stressed industrial or commercial floors, warehouses, carparks, shopping centers as well as any floors that are to be cleaned using machines. Generally, movement control joints are set in bays between 25 and 60 m2 with a maximum bays dimension between 5 to 10 meters.
Technical characteristics
- Concrete shrinkage during curing - Structural settlement, sometimes differential settlement - Movements generated by the enviro
nment : high winds, vibrations created by nearby construction works, pedestrian traffic, trolleys, vehicles, etc...
Serie 1600 movement control joints of 3 mm to 20 mm height are made of a flexible ethylene-propylene (EDPM) rubber insert, available in black, beige or grey (other colours on request) bonded by vulcanisation to two parallel horizontally perforated metalconners. The vulcanisation ensures an extremely strong and stable bonding between metal and the flexible and resilient EDPM gasket. Serie 1600 movement control joints higher than 20 mm are made of a silicone sealant (instead of EPDM) bonded to two parallel horizontally perforated metals corners. The metal corners are available in aluminium, brass or stainless steel. They ensure a very efficient protection of the flooring edges while the resilient internal part absorbs the movements and therefore prevents cracks development in the flooring. The large holes at the base of the profile allow an excellent bonding of the til
es to the adhesive. To match any project requirements, Serie 1600 movement control joints are available in heights from 3 mm to 30 mm and a visible width of 10 mm.
Advantages
The specially developed Serie 1600 control joints absorbs heavy stresses and spreads them evenly throughout the flooring and the foundations. It also prevents transmission of footfall and sounds from other objects.
© GV2 - 2010 - Tous droits réservés - All rights reserved
Edition June 2010
Serie 1600 profile selection
Serie 1600 movement control joints are used for any type of building: Shopping malls, airports, railway stations, offices, hospitals, industrial buildings, hotels, warehouse, etc. The flexible EPDM gasket is resistant to acids, alkali liquids, UV rays and weathering, therefore allowing an outdoor installation. The silicon sealant used for profiles higher than 20mm has excellent properties recognized and approved by professionals.
Serie 1600/B brass profiles can be used as part of the d
ecoration design or for their high load-bearing performance. In addition, they are extremely resistant to chemicals that are created during tiles installation. It is to be noted that brass oxidize when in contact with air especially in a humid environment. With time, the visible part will be covered with“sheen”, an oxidised layer, which modifies its aspect. Brass
Serie 1600/A aluminium profiles can be used as part of the decoration design and in all cases where a particular chemical reaction is not expected. To prevent corrosion occurrence to take place, cement-based materials shall be used with care. As aluminium reacts when in contact with alkaline products, it is important to carefully remove all traces of mortar, cement based adhesive and grout from all the visible surfaces. Aluminium
Serie 1600/S stainless steel profiles can be used as part of the decoration design but also in demanding environments concerning the mechanical constraints (heavy loads) or chemical constrain
ts (acids). Stainless steel profiles can be used in the food industry, hospitals, swimming-pools, etc... Stainless steel
In any case, it is necessary to make sure that the Serie 1600 movement control joints are adapted to the expected mechanical and chemical requirements.
Maintenance
All Serie 1600 movement control joints do not require specific maintenance. They can be cleaned using standard maintenance products provided that they do not contain hydrochloric or hydrofluoric acids and are not abrasive.
Installation
1. Serie 1600 control joint profile should be chosen to match the thickness of the tiles. 2. Tile adhesive should be applied around the junction using a serrated trowel 3. Press the profile into the adhesive bed and align it. 4. Spread mortar over the entire surface of the joint. 5. Press in tiles firmly and align them so that they are flush with the top edge of the profile. Lay the tiles without leaving any gaps. 6. Allow a joint of 2 mm around the profile itsel
f. 7. Then fill the space between the tiles and the profile with grout.
Edition June 2010
© GV2 - 2010 - Tous droits réservés - All rights reserved
- GV2/VEDA FRANCE - 52, avenue Marcel Paul - 93297 Tremblay en France Cedex - Tel : 33 (0)1 48 61 70 80 - Fax : 33 (0)1 48 61 70 81 E-mail : contact@vedafrance.com - web : www.vedafrance.com
Control joints for bed af¿xed tiles
Serie 1700
Presentation
Serie 1700 movement control joints are designed to prevent the malfunctions (cracks, de-bonding) that systematically occur when Àooring systems are installed in large areas without joints. Those malfunctions have several origins: - Concrete thermal expansion and contraction according to temperature variations - Concrete shrinkage during curing - Structural settlement, sometimes differential settlement - Movements generated by the environment : high winds, vibrations created by nearby construction works, pedestrian traf¿c, trolleys, vehicles, etc...
Series 1700 with anchor piece
Fiel
d of application
Serie 1700 movement control joints are installed in control bays to partition the Àooring systems bed in mortar screeds such as ceramic tiling, marble, natural stones, etc... They are designed to absorb highly stressed industrial or commercial Àoors, warehouses, carparks, shopping centers as well as any Àoors that are to be cleaned Series 1700 without anchor piece using machines. Generally, movement control joints are set in bays between 25 and 60 m2 with a maximum bays dimension between 5 to 10 meters. The joint shall be inserted in at least 2/3 of the mortar bed thickness, preferably through all the thickness of the mortar plus tiling built-up.
Technical characteristics
Serie 1700 movement control joints incorporate a Àexible ethylene-propylene (EPDM) rubber insert, available in black, beige or grey (other colours on request) bonded by vulcanisation to two parallel metal plates. Vulcanisation ensures an extremely strong and stable bonding between metal and the
exible and resilient EPDM gasket. The metal plates are available in aluminium, brass, or stainless steel. They ensure a very ef¿cient protection of the Àooring edges while the resilient internal part absorbs the movements and therefore prevents cracks development in the Àooring. Notches at the base of the metal plates allow for the setting of wire ties for better linkage to the screed. Serie 1700 movement control joints can also be supplied without notches allowing installation after ¿nalisation of the Àooring. To match any project requirements, Serie 1700 movement control joints are available in different heights with metal plates and rubber gaskets in different thicknesses.
© GV2 - 2010 - Tous droits réservés - All rights reserved
Edition June 2010
Serie 1700 proÀle selection:
Serie 1700 movement control joints are used for any type of building: Shopping malls, airports, railway stations, of¿ces, hospitals, industrial buildings, hotels, warehouse, etc. The Àexible EPD
M gasket is resistant to acids, alkali liquids, UV rays and weathering, therefore allowing an outdoor installation. Serie 1700/B brass pro¿les can be used as part of the decoration design or for their high load-bearing performance. In addition, they are extremely resistant to chemicals that are created during tiles installation. It is to be noted that brass oxidize when in contact with air especially in a humid environment. With time, the visible part will be covered with“sheen”, an oxidised layer, which modi¿es its aspect. Serie 1700/A aluminium pro¿les can be used as part of the decoration design and in all cases where a particular chemical reaction is not expected. To prevent corrosion occurrence to take place, cement-based materials shall be used with care. As aluminium reacts when in contact with alkaline products, it is important to carefully remove all traces of mortar, cement based adhesive and grout from all the visible surfaces Serie 1700/S stainless steel pro¿les can
be used as part of the decoration design but also in demanding environments concerning the mechanical constraints (heavy loads) or chemical constraints (acids). Stainless steel pro¿les can be used in the food industry, hospitals, swimming-pools, etc.
Series 1700 with anchor piece
Brass
Aluminium
Stainless steel
Series 1700 without anchor piece
Brass
Aluminium
Stainless steel
S
h
anchor piece h = 20 . 30 . 40 . 50 mm S = 9 mm
requirements.
Maintenance
All Serie 1700 movement control joints do not require speci¿c maintenance. They can be cleaned using standard maintenance products provided that they do not contain hydrochloric or hydroÀuoric acids and are not abrasive.
© GV2 - 2010 - Tous droits réservés - All rights reserved
- GV2/VEDA FRANCE - 52, avenue Marcel Paul - 93297 Tremblay en France Cedex - Tel : 33 (0)1 48 61 70 80 - Fax : 33 (0)1 48 61 70 81 E-mail : contact@vedafrance.com - web : www.vedafrance.com
Edition June 2010
In any case, it is necessary to ma
ke sure that the Serie 1700 movement control joints are adapted to the expected mechanical and chemical
Control joints for bed affixed tiles
Serie Luxe 2700 brass
Presentation
Serie Luxe 2700 brass movement
control joints are designed to prevent the malfunctions (cracks, de-bronding) that systematically occur when flooring systems are installed in large areas without joints. Those malfunctions have several origins: - Concrete thermal expansion and contraction according to temperature variations - Concrete shrinkage during curing - Structural settlement, sometimes differential settlement - Movements generated by the environment: high winds, vibrations
H
Field of application
Serie Luxe 2700 brass movement control joints are designed to absorb highly stressed industrial or commercial floors, warehouses, carparks, shopping centers, etc... They are used to partition ceramic tiles, marble, granite, natural stone, etc. They are made of two brass side plates bonded to a compressible adh
esive foam and an elastomeric sealant. The Serie Luxe 2700 brass garantees a very high quality decorative and luxurious finish.
Finishes
The brass side plates surfaces can be supplied either mill finish, satin finish or high gloss polished. The elastomeric sealant is available in any standard or non standard colour.
S
created by nearby construction works, pedestrian traffic, trolleys, vehicles, etc.
e
Edition March 2010
Dimensions
height H : 20 - 30 - 40 mm width S : 10 - 15 mm tickness e : 3 mm - 5 mm
Other dimensions can be produced upon request. Please ask for minimum quantity.
© GV2 - 2010 - Tous droits réservés - All rights reserved
- GV2/VEDA FRANCE - 52, avenue Marcel Paul - 93297 Tremblay en France Cedex - Tel : 33 (0)1 48 61 70 80 - Fax : 33 (0)1 48 61 70 81 E-mail : contact@vedafrance.com - web : www.vedafrance.com
Control joints for bed affixed tiles
Serie Luxe 2700 stainless steel
Presentation
Serie Luxe 2700 stainless steel
movement control joints are desi
gned to prevent the malfunctions (cracks, de-bronding) that systematically occur when flooring systems are installed in large areas without joints. Those malfunctions have several origins: - Concrete thermal expansion and contraction according to temperature variations - Concrete shrinkage during curing - Structural settlement, sometimes differential settlement - Movements generated by the environment: high winds, vibrations created by nearby construction works, pedestrian traffic, trolleys, vehicles, etc.
e H
Field of application
Serie Luxe 2700 stainless steel movement control joints are designed to absorb highly stressed industrial or commercial floors, warehouses, carparks, shopping centers, etc... They are used to partition ceramic tiles, marble, granite, natural stone, etc. They are made of two brass side plates bonded to a compressible adhesive foam and an elastomeric sealant. The Serie Luxe 2700 stainless steel garantees a very high quality decorative and luxurious finish.
Finishes
The stainless steel side plates surfaces can be either mill finish, satin finish or high gloss polished. The elastomeric sealant is available in any standard or non standard colour.
S
Dimensions
Edition March 2010
height H : 20 - 30 - 40 mm width S : 10 - 15 mm tickness e : 3 - 5 mm
Other dimensions can be produced upon request. Please ask for minimum quantity.
© Tous droits réservés - All rights reserved
- GV2/VEDA FRANCE - 52, avenue Marcel Paul - 93297 Tremblay en France Cedex - Tel : 33 (0)1 48 61 70 80 - Fax : 33 (0)1 48 61 70 81 E-mail : contact@vedafrance.com - web : www.vedafrance.com
Control joints for adhesive affixed tiles
Serie Eco 600
Presentation
Serie Eco 600 control joints are designed to prevent the malfunctions (cracks, de-bonding) that systematically occur when flooring systems are installed in large areas without joints. Those malfunctions have several origins: - Concrete thermal expansion and contraction according to temperature variations
Finishes
The stainless steel side plates surfaces can be either mill finish, satin finish or high gloss polished. The elastomeric sealant is available in any standard or non standard colour.
S
Dimensions
Edition March 2010
height H : 20 - 30 - 40 mm width S : 10 - 15 mm tickness e : 3 - 5 mm
Other dimensions can be produced upon request. Please ask for minimum quantity.
© Tous droits réservés - All rights reserved
- GV2/VEDA FRANCE - 52, avenue Marcel Paul - 93297 Tremblay en France Cedex - Tel : 33 (0)1 48 61 70 80 - Fax : 33 (0)1 48 61 70 81 E-mail : contact@vedafrance.com - web : www.vedafrance.com
Control joints for adhesive affixed tiles
Serie Eco 600
Presentation
Serie Eco 600 control joints are designed to prevent the malfunctions (cracks, de-bonding) that systematically occur when flooring systems are installed in large areas without joints. Those malfunctions have several origins: - Concrete thermal expansion and contraction according to temperature variations
... ascunde
Alte documentatii ale aceleasi game Vezi toate
Fisa tehnica
10 p | EN
Joint Covers & compression profiles
Fisa tehnica
14 p | EN
Fire stop systems